SOURCES SOUGHT
99 -- Process Hazard Analysis (PHA) Leader Training
- Notice Date
- 9/27/2012
- Notice Type
- Sources Sought
- NAICS
- 611430
— Professional and Management Development Training
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-CM-SRA-HT00-00011
- Point of Contact
- Winifred Renz, Phone: 5093712338, ,
- E-Mail Address
-
werenz@bechtel.com,
(werenz@bechtel.com, /div)
- Small Business Set-Aside
- N/A
- Description
- PROCESS HAZARD ANALYSIS (PHA) LEADER TRAINING Subcontract Requisition Number: 24590-CM-SRA-HT00-00011 Submit Interest By: October 4, 2012 Estimated Budget: <$100,000 Schedule: •· Issue Request for Proposal: October 8, 2012 •· Award and Notice to Proceed: November 30, 2012 •· Start Work: December 2012 •· All Work Complete: September 2013 Safety Classification: NON-ITS Additional Characteristic: NONE Quality Level: CM Type of Subcontract: FIRM FIXED PRICE PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel National, Inc. for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and convert the waste into a stable glass form. The Project site is located in the 200 East Area of the Hanford Reservation near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Ambient temperature range is -23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Process hazard Analysis (PHA) leader training to CONTRACTOR personnel (approximately 50) at the WTP facility in Richland, Washington. These training services shall include (1) in-class instruction by an experienced trainer, (2) notebook material describing how to organize and lead hazard and Operability (HAZOP) analyses and what-if/checklist analyses, and practical, process-oriented Workshop Problems. An exam to test proficiency shall also be developed and given. QUALITY ASSURANCE (QA) REQUIREMENTS Programmatic Quality Assurance requirements for subcontracts performed in the WTP Jobsite will be "NP" (non permanent or temporary work, generally no QA Program required), "CM" (commercial quality based the requirements in DOE Order 414.1C), or "QL" (nuclear level quality based on the requirements in ASME NQA-1 2000). Bechtel may require, as an element of bidder pre-qualification, submission of a representative sample QA Program or Table of Contents copy. For QL subcontracts, the successful bidder's QA Program must be approved prior to award of the subcontract. CODES & STANDARDS •· 10CFR830 Subpart B •· 29CFR 1901.119 •· 40CFR68 •· DOE-STD-3009, Ch. N. 3 BIDDER REGISTRATION AND PRE-QUALIFICATION Preliminary Pre-Qualification Requirements The BNI Acquisition Services Subcontracts group, is responsible for collection, evaluation, and internal publication of potential bidders' information for the purpose of pre-qualifying them to bid on any particular subcontract. As part of this process, BNI requires all potential offerors to register at the Supplier and Contractor Portal at: https://supplier.bechtel.com Prior to being considered for bidding on a Request For Proposal (RFP) for this WTP web posting opportunity, potential bidders must complete and submit the required forms located at http://www.hanfordvitplant.com/supplier_resources/qualification_process/ All information provided shall be strictly confidential. Registration All bidders must register with Bechtel National, Inc. for Work on the WTP Project. If your company has registered previously, then only supplemental information should be sent to the Bechtel National, Inc. representative noted below. Information to be provided by potential bidders must include: · Dun and Bradstreet #: · Company Name: · Company Address: · Contact Phone #: • · Contact Fax #: · Contact Person: · E-mail Address: · Safety data and information · Applicable work experience and Projects WTP BACKGROUND Information about the WTP Project can be found on http://www.hanfordvitplant.com CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Deborah Mackay Tel. No. 509.371.2160 Email address: dsmith@bechtel.com Mailstop: MS14-3A
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-CM-SRA-HT00-00011/listing.html)
- Place of Performance
- Address: WTP Facility, Richland, Washington, 99337, United States
- Zip Code: 99337
- Zip Code: 99337
- Record
- SN02901923-W 20120929/120928000454-d9de4e453db906213b40e0e54778562f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |