SOLICITATION NOTICE
13 -- HANDLE, ESCAPE, TYPE IV
- Notice Date
- 1/10/2013
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; AFLCMC EBHK;6033 ELM LN BLDG 1247;HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8213-13-R-3020
- Response Due
- 2/25/2013
- Archive Date
- 5/26/2013
- Point of Contact
- Loriell Rumsey, Phone 801-586-4039, Fax 801-777-5840, Emailloriell.rumsey@hill.af.mil
- E-Mail Address
-
Loriell Rumsey
(loriell.rumsey@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201377024 Item: 0001 NSN: 1377012077089ES HANDLE, ESCAPE, TYPE IV P/N: 827335-01, P/N: 2674400-401-01, P/N: L320C2004 TYPE IV, Description: INITIATOR,PROPELLANT ACTUATED|3.725 INCHES NOMINAL|B-1B|TYPE IV|INSTANTANEOUS|MANUAL|INCLUDED|EXWT|1377-MY42|UN0367|EX1988080762|0.00 0000 STORAGE POUNDS AND 0.002000 TRANSPORTATION POUNDS|ESCAPE HANDLE INITIATOR ASSEMBLY (TYPE IV)|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|FUZES, DETONATING|1.4S Supp. Description: The requirement of this CLIN applies to all subsequent CLINS (0001AB, 0001AD). : 0.0000 PR Number(s): FD20201377024 Item: 0001AA NSN: FAT Description: FATP Supp. Description: IAW DATA 1423-1 EXHIBIT B002; FIRST ARTICLE TESTING (FAT) PLAN AND PROCEEDURES attached hereto. **NOTE** Approved FAT CDRL(s) will be attached electronically in WAWF when invoicing for this CLIN. Failure to attach the FAT CDRL in WAWF will result in delay of government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *30 Calendar Days *ARO Contract, 1.00 LO PR Number(s): FD20201377024 Item: 0001AB NSN: FA P/N: 827335-01, P/N: 2674400-401-01, P/N: L320C2004 TYPE IV, Description: Supp. Description: In addition to production quantity. Quantity: 4.0000 EA Destn: PLANT,,,. Delivery: *30 Calendar Days *ARO after approval of First Article Test Plan., 4.00 PR Number(s): FD20201377024 Item: 0001AC NSN: FAT Description: TEST REPORT IAW DD 1423-1 ATTACHED HERETO EXHIBIT B Supp. Description: IAW DATA 1423-1 EXHIBIT B001; FIRST ARTICLE TESTING (FAT) REPORT attached hereto. **NOTE** Approved FAT CDRL(s) will be attached electronically in WAWF when invoicing for this CLIN. Failure to attach the FAT CDRL in WAWF will result in delay of government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *30 Calendar Days *ARO after completion of First Article Acceptance Testing., 1.00 LO PR Number(s): FD20201377024 Item: 0001AD NSN: SAME Same as basic item above Description: Quantity: 16.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK,73145-5000. Delivery: 31 MAR 2014 Specified Date, 16.00 EA Plus 0017 additional items Duration of Contract Period: Delivery 31 Mar 2014 All responsible sources may submit a capablility statement, proposal, or quotation, which shall be considered by the agency. Electronic procedure will be used for this solicitation. The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.FBO.gov Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. To include all required reports and data. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8213-13-R-3020/listing.html)
- Record
- SN02962850-W 20130112/130110234158-12ca130bb5da9a7bd7f6ac82b61466d2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |