Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 17, 2013 FBO #4072
SOLICITATION NOTICE

53 -- FASTENERS

Notice Date

1/15/2013
 

Notice Type

Combined Synopsis/Solicitation
 

Contracting Office

PO BOX 620, Code 7810, Grand Coulee, WA 99113
 

ZIP Code

99113
 

Solicitation Number

R13PS17233
 

Response Due

1/22/2013
 

Archive Date

7/21/2013
 

Point of Contact

Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 

E-Mail Address

Clientservices@fedbid.com;
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is R13PS17233 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-63. The associated North American Industrial Classification System (NAICS) code for this procurement is 332722 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-01-22 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be GRAND COULEE, WA 99133 The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following: LI 001, WASHER: FINISHING, NICKEL PLATED NO. 10, CONTERSUNK FOR NO. 10 SCREWS, FURNISH 100 PER BOX., 3, BX; LI 002, SCREW: SHEET METAL, STEEL, 1/4 X 1 INCH, SELF DRILL, HEX WASHER HEAD, ZINC PLATED, FURNISH 100 PER BOX., 3, BX; LI 003, SCREW: CAP, SS, 1/4-20 X 1 INCH, HEX HEAD, TYPE 18-8, NOT TO EXCEED 100 PER BOX., 200, EA; LI 004, SCREW: CAP, STEEL, 3/8-16NC X 5 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, NOT TO EXCEED 100 PER BOX., 200, EA; LI 005, SCREW: CAP, STEEL, 3/8-16NC X 1 INCH, HEX HEAD, ZINC PLATED, GRADE 5, NOT TO EXCEED 100 PER BOX., 500, EA; LI 006, SCREW: MACHINE, BRASS, 1/4-20NC X 3/4 INCH ROUND HEAD, SLOTTED, FURNISH 100 PER BOX., 2, BX; LI 007, NUT: HEX, BRASS, 1/4 INCH X 20 NC, MACHINE SCREW THREAD, FURNISH 100 PER BOX., 5, BX; LI 008, NUT: WING, STEEL, 1/4 INCH X 20 NC, ZINC COATED, PLAIN, REGULAR, NOT TO EXCEED 100 PER BOX., 200, EA; LI 009, ROD: THREADED, STEEL (REDI-BOLT), 7/8 INCH NC, ZINC PLATED, 36 INCHES LONG, 2.59D., 6, EA; LI 010, BOLT: LAG, STEEL, 5/16 X 4 INCH, ZINC COATED, HEX HEAD, GIMLET POINT, SCREW THREAD., 50, EA; LI 011, ANCHOR: EXPANSION, 1/4NC X 2-1/4 INCH BOLT, EXTERNALLY THREADED, WITH NUT AND WASHER, WEDGE REDHEAD NO. WS-1422, OR SIMPSON NO. WA25214, OR EQUAL., 1500, EA; LI 012, NUT: HEX, STEEL NO. 12-24 NC, ZINC PLATED, GRADE 2, FURNISH 100 PER BOX., 5, BX; LI 013, SCREW: MACHINE, BRASS NO. 10-24 NC X 1/2 INCH, ROUND HEAD, SLOTTED, FURNISH 100 PER BOX., 3, EA; LI 014, SCREW: CAP, SS. 1/4 -20 X 1/2 INCH, HEX HEAD, TYPE 18-8, SELECTION OR COMBINATION OF TYPE 302-303-304., 100, EA; LI 015, SCREW: CAP, SS, 1/4 -20 NC X 3/4 INCH, HEX HEAD, GRADE 5, TYPE 18-8, NOT TO EXCEED 100 PER BOX, SELECTION OR COMBINATION OF TYPE 302-303-304., 250, EA; LI 016, SCREW: CAP, SS, 5/8-11 NC X 1-1/2 INCH, FLAT HEAD, COUNTERSUNK WITH 3/8 INCH HEX SOCKET, TYPE 18-8, FURNISH 25 PER BOX, SELECTION OR COMBINATION OF TYPE 302-303-304., 250, EA; LI 017, SCREW: MACHINE, BRASS NO. 10-32 NF X 1/2 INCH, ROUND HEAD, SLOTTED, FURNISH 100 PER BOX., 4, BX; LI 018, WASHER: FLAT, BRASS NO. 10, SMALL PATTERN, 7/16 INCH OD (.200 ID), FURNISH 100 PER BOX., 5, BX; LI 019, SCREW: MACHINE, BRASS NO. 6-32 NC X 1/2 INCH, FLAT HEAD, SLOTTED., 1, BX; LI 020, NUT: SQUARE, STEEL, 3/8 INCH -16 NC, FLAT AND CHAMFERED TOP (WASHER CROWNED), UNFINISHED, GRADE 2, FURNISH 100 PER BOX., 20, BX; LI 021, NUT: HEX, STEEL, 7/16 INCH X 14 NC, ZINC PLATED, GRADE 2, SEMI-FINISHED, FULL THICKNESS. FURNISH 100 PER BOX., 300, EA; LI 022, WASHER: LOCK, STEEL, 7/16 INCH, ZINC PLATED, SPRING TYPE, FURNISH 100 PER BOX., 300, EA; LI 023, WASHER: FLAT, STEEL, 7/16 INCH, ZINC COATED, STANDARD WIDE, NOMINAL INSIDE DIAMETER 0.500, OUTSIDE DIAMETER 1.250, THICKNESS 0.093, FURNISH 100 PER BOX., 300, EA; LI 024, NUT: HEX, STEEL, 7/16 INCH, ZINC COATED, STANDARD WIDE, NOMINAL INSIDE DIAMETER 0.500, OUTSIDE DIAMETER 1.250, THICKNESS 0.093, FURNISHED 100 PER BOX., 300, EA; LI 025, SCREW: SHEET METAL, STEEL NO. 10, 3/4 INCH, SELF DRILL, HEX WAHER HEAD, ZINC PLATED, FURNISH 100 PER BOX, NATIONAL STANDARD NO. 09692815, OR EQUAL., 6, BX; LI 026, NUT: HEX, STEEL, 1/2 INCH X 13 NC, ZINC PLATED, GRADE 2, SEMI-FINISHED, FULL THICKNESS, FURNISH 100 PER BOX. HEAVY NOT ACCEPTABLE., 1000, EA; LI 027, ANCHOR: BOLT, STEEL, 1/4 X 1-3/4 INCH, ZINC PLATED, EXPANSION SLEEVE SCREW, EXTERNALLY THREADED WEDGE, FURNISH 100 PER BOX, ANKR-TITE NO. 801-1413, OR SIMPSEN NO. WA25134, OR EQUAL., 5, BX; LI 028, NUT: HEX, STEEL, 5/8 INCH X 11 NC, ZINC PLATED, GRADE 8, SEMI-FINISHED, FULL THICKNESS, FURNISH 50 PER BOX., 600, EA; LI 029, BOLT: EYE, STEEL, 1/4 X 1 INCH, SHOULDER, CARBON HEAT TREATED, WELDLESS FACED SHOULDER PATTERN, STANDARD LENGTH, FULL THREADED SHANK., 70, EA; LI 030, SCREW: CAP, STAINLESS STEEL, 5/8-11NC X 1-1/4 INCH, HEX HEAD, TYPE 304, NOT TO EXCEED 25 EACH PER BOX., 125, EA; LI 031, ROD: THREADED, STEEL (REDI-BOLT), 5/8 INCH NC, 36 INCHES LONG, ZINC PLATED., 10, EA; LI 032, SCREW: MACHINE, STEEL NO. 10-32NF X 1-1/2 INCH ROUND HEAD, ZINC PLATED, SLOTTED, GRADE 2, FURNISH 100 PER BOX., 3, BX; LI 033, SCREW: CAP, STEEL, 1/4-20NC X 1-1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, FURNISH 100 PER BOX., 300, EA; LI 034, SCREW: CAP, STEEL, 1/4-20NC X 1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, FURNISH 100 PER BOX, ROCKFORD NO. P0301-537, OR EQUAL., 7, BX; LI 035, SCREW: CAP, STEEL, 7/8-9NC X 5-1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5., 10, EA; LI 036, BOLT: EYE, FORGED STEEL, 7/16 X 1-3/8, SHOULDER, CARBON HEAT TREATED, DROP FORGE SHOULDER PATTERN, EYE OUTSIDE DIAMTER 1 27/32, EYE INSIDE DIAMTER 1 3/32, LENGTH UNDER EYE 1-3/8, HIGH TENSILE STRENGTH, MAX LOAD 1800 LBS., 40, EA; LI 037, SCREW: CAP, STAINLESS STEEL, 1/2-13NC X 6 INCH, HEX SOCKET HEAD, TYPE 18-8, NOT TO EXCEED 25 EACH PER BOX, SELECTION OR COMBINATION OF TYPES 302-303-304., 80, EA; LI 038, SCREW: MACHINE, STEEL NO. 8-32NC X 1/2 INCH, FLAT HEAD, SLOTTED, ZINC PLATED, FURNISH 100 PER BOX., 6, BX; LI 039, SCREW: CAP, STEEL, 5/8-11NC X 1-1/4 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, NOT TO EXCEED 100 EACH PER BOX., 150, EA; LI 040, SCREW: MACHINE, STEEL NO. 10-32NF X 1 INCH, ROUND HEAD, SLOTTED, ZINC PLATED, FURNISH 100 PER BOX., 4, BX; LI 041, NUT: HEX, STAINLESS STEEL, 1/4 INCH X 20 NC, TYPE 18-8, FULL THICKNESS, NOT TO EXCEED 100 EACH PER BOX, SELECTION OR COMBINATION OF TYPES 302-303-304., 400, EA; LI 042, NUT: HEX, STEEL, 1 INCH X 8 NC, BLACK, ASTM 563, GRADE A, FURNISH 25 PER BOX., 100, EA; LI 043, WASHER: FLAT, STAINLESS STEEL, 1/4 INCH, TYPE 18-8, NOT TO EXCEED 100 EACH PER BOX., 500, EA; LI 044, SCREW: CAP, STEEL, 5/16-24NF X 1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED., 100, EA; LI 045, BOLT: EYE, STEEL, 3/4-10 X 2 INCH, SHOULDER, CARBON HEAT TREATED, WELDLESS, FACED SHOULDER PATTERN, STANDARD LENGTH, FULL THREADED SHANK. GIBRAL TAR PZP13672G NOT ACCEPTABALE., 40, EA; LI 046, BOLT: EYE, STEEL, 9/16 X 1-5/8 INCH, SHOULDER, CARBON HEAT TREATED, WELDLESS, FACED SHOULDER PATTERN, STANDARD LENGTH, FULL THREADED SHANK, NC., 12, EA; LI 047, SCREW: CAP, BRONZE, 5/8-11NC X 5-1/2 INCH, EVERDUR SILICON BRONZE, HEX HEAD, ALLOY 651., 50, EA; LI 048, WASHER: FLAT, STEEL, 1 INCH, ZINC PLATED, STANDARD WIDE, NOMINAL INSIDE DIAMETER 1.062, OUTSIDE DIAMETER 2.500, THICKNESS 0.156., 100, EA; LI 049, SCREW: CAP, STEEL, 7/8-9NC X 2 INCH, HEX HEAD, ZINC PLATED, GRADE 5 CERTIFICATION REQUIRED., 25, EA; LI 050, WASHER: FLAT, STEEL, METRIC M10, ZINC PLATED., 100, EA; LI 051, NUT: HEX, STEEL M8 X 1.25, ZINC PLATED., 100, EA; LI 052, WASHER:FLAT, STEEL, METRIC M8, ZINC PLATED, NOT TO EXCEED 100 EACH PER BOX., 200, EA; LI 053, WASHER: FLAT, STEEL, METRIC M4, ZINC PLATED., 100, EA; LI 054, WASHER: LOCK, STEEL, METRIC M10, ZINC PLATED, SPRING TYPE, FURNISH 100 PER BOX., 100, EA; LI 055, NUT: HEX, STEEL, M4 X.70, ZINC PLATED, FURNISH 100 PER BOX., 100, EA; LI 056, ANCHOR: EXPANSION, 3/8-16NC X 1-1/2 INCH, ZINC PLATED, CARBON STEEL, DROP IN, SINGLE UNIT WITH CENTER EXPANSION WEDGE, INTERNAL THREADS, FOR 1/2 INCH DIAMETER DRILL BIT, 4942 LBS AVERAGE PULLOUT TEST IN 3850 PSI CONCRETE, FURNISH 50 PER BOX, POWERS NO. 6306 (1-9/16 INCH LENGTH, OR HILTI HDI 3/8 INCH ITEM NO. 336426 (1 9/16 INCH ANCHOR LENGTH), OR UNIVERSAL FASTENING THUNDERDROP TD-38, OR EQUAL. REDHEAD NO. RM-38 IS NOT ACCEPTABLE., 250, EA; LI 057, SCREW: CAP, STEEL, M4 X.70 X 10MM, HEX HEAD, ZINC PLATED, GRADE 8.8, FULL THREAD, REGULAR PITCH., 100, EA; LI 058, SCREW: CAP, STEEL, M4 X.70 X 25MM, HEX HEAD, ZINC PLATED, GRADE 8.8, FULL THREAD, REGULAR PITCH., 3, EA; LI 059, SCREW: CAP, STEEL, M4 X.70 X 20MM, HEX HEAD, ZINC PLATED, GRADE 8.8, FULL THREAD, REGULAR PITCH., 80, EA; LI 060, SCREW: CAP, STEEL, M4 X.70 X 30MM, HEX HEAD, ZINC PLATED, GRADE 8.8, FULL THREAD, REGULAR PITCH., 60, EA; LI 061, BOLT: EYE, STEEL, 5/8 X 1-3/4 INCH, SHOULDER, CARBON HEAT TREATED, WELDLESS, FACED SHOULDER PATTERN, STANDARD LENGTH, FULL THREADED SHANK, NC., 30, EA; LI 062, ANCHOR: EXPANSION NO. 10/12 X 1 INCH, 1/4 INCH DRILL, PLASTIC, FOR WOOD SCREWS, FURNISH 100 PER BOX, RAWL PRODUCTS NO. 7579, OR HILLMAN NO. 370342, OR PERINE-DANFORTH NO. 1016PAC, OR EQUAL., 300, EA; LI 063, BOLT: CARRIAGE, STEEL, 5/16-18NC X 1-1/4 INCH, ZINC PLATED, GRADE 2, FURNISH 100 PER BOX., 200, EA; LI 064, WASHER: LOCK, STAINLESS STEEL, 3/4 INCH, SPRING TYPE, 18-8 STAINLESS., 50, EA; LI 065, SCREW: WOOD, STEEL NO. 8 X 1-1/2 INCH, ZINC PLATED, FLAT HEAD, PHILLIPS, FURNISH 100 PER BOX., 5, BX; LI 066, PIN: COTTERS, STAINLESS STEEL, 3/16 X 1-1/2 INCH LONG., 100, EA; LI 067, SCREW: SET, STAINLESS STEEL, 5/16 INCH -18NC X 3/4 INCH, HEX SOCKET, TYPE 18-8, CUP POINT, FURNISH 100 PER BOX., 140, BX; LI 068, SCREW: SET, STAINLESS STEEL, 5/16 INCH - 18NC X 3/4 INCH, HEX SOCKET, TYPE 18-8, CUP POINT, FURNISH 100 PER BOX., 140, EA; LI 069, SCREW: CAP, STEEL, 5/16-18NC X 1 INCH, HEX HEAD, ZINC PLATED, GRADE 5, NOT TO EXCEED 100 EACH PER BOX., 300, EA; LI 070, SCREW: CAP, STAINLESS STEEL, 5/8 -11NC X 2 INCH, HEX HEAD, TYPE 18-8, FURNISH 25 PER BOX, SELECTION OR COMBINATION OF TYPES 302-303-304., 400, EA; LI 071, SCREW: CAP, STEEL, 3/8-16NC X 2-1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED., 100, EA; LI 072, WASHER: LOCK, STEEL NO. 10, ZINC PLATED, SPRING TYPE, FURNISH 100 PER BOX., 400, EA; LI 073, SCREW: WOOD, STEEL NO. 10 X 3/4 INCH, ZINC PLATED, FLAT HEAD, PHILLIPS, FURNISH 100 PER BOX., 2, BX; LI 074, WASHER: FLAT, STEEL, 3/8 INCH, ZINC PLATED, STANDARD, WIDE SERIES, NOMINAL INSIDE DIAMTER 7/16 (.438), OUTSIDE DIAMETER 1.000 INCH, THICKNESS 3/32 (0.093) INCH, NOT TO EXCEED 100 PER BOX. FAS-N-FIT NO. 18130 NOT ACCEPTABLE., 2000, EA; LI 075, NUT: HEX, STEEL, 3/8 INCH X 24 NF, ZINC PLATED, GRADE 2, SEMI-FINISHED, FULL THICKNESS, FURNISH 100 PER BOX., 300, EA; LI 076, NUT: HEX, ALUMINUM, 1/2 INCH X 13 NC, BURNDY ALLOY 6061-T6, CLASS 2B., 60, EA; LI 077, SCREW: CAP, ALUMINUM, 1/2 -13NC X 2-3/4 INCH, HEX HEAD., 50, EA; LI 078, BOLT: TOGGLE, STEEL, 3/16 X 3 INCH, TUMBLE-WING, ROUND HEAD., 100, EA; LI 079, SCREW: CAP, STAINLESS STEEL, 1/2 -13NC X 2 INCH, HEX HEAD, TYPE 18-8, SELECTION OR COMBINATION OF TYPE 302-303-304, NOT TO EXCEED 50 EACH PER BOX., 100, EA; LI 080, SCREW: CAP, STAINLESS STEEL, 1/2 -13NC X 1-1/2 INCH, HEX HEAD, TYPE 18-8, SELECTION OR COMBINATION OF TYPE 302-303-304, NOT TO EXCEED 50 EACH PER BOX., 100, EA; LI 081, ANCHOR: EXPANSION, 3/8-16 X 3-3/4 INCH, 1-1/8 INCH THREAD LENGTH, 3/8 INCH HOLE SIZE, ONE PIECE CONSTRUCTION COMPLETE WITH SPLIT RING WEDGE, HILTI NO. 00453647, OR PHILLIPS RED HEAD NO. WS-3836, OR SIMPSON NO. WA37334, OR EQUAL., 300, EA; LI 082, SCREW: SHEET METAL, STEEL NO. 12 X 2 INCH, ZINC PLATED, PAN HEAD, FURNISH 100 PER BOX., 6, BX; LI 083, ANCHOR: EXPANSION, 1/2-13 X 7 INCH, 1-1/4 INCH THREAD LENGTH, 1/2 INCH HOLE SIZE, ONE PIECE CONSTRUCTION COMPLETE WITH SPLIT RING WEDGE, KWIK-BOLT CONCRETE ANCHOR NO. 12-7, OR EQUAL., 35, EA; LI 084, SCREW: CAP, STAINLESS STEEL, 1/2-13NC X 2-1/2 INCH, HEX HEAD, TYPE 18-8, NOT TO EXCEED 50 EACH PER BOX, SELECTION OR COMBINATION OF TYPES 302-303-304., 250, EA; LI 085, SCREW: CAP, STEEL, 1/2-13NC X 4-1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5., 75, EA; LI 086, SCREW: MACHINE, BRASS NO. 8-32NC X 3/4 INCH, ROUND HEAD, SLOTTED, FURNISH 100 PER BOX., 6, BX; LI 087, SCREW: MACHINE, BRASS NO. 8-32 NC X 1-1/2 INCH, ROUND HEAD, SLOTTED, FURNISH 100 PER BOX., 2, BX; LI 088, WAHSER: LOCK, STAINLESS STEEL, 1-1/4 X 1-7/8 INCH, WITH LOCKING TABS, ASTM A167-74, TYPE 304 ANNEALED, DWG 222-D-2100(32), 117-JMH-58., 2055, EA; LI 089, WASHER: LOCK, STAINLESS STEEL, 1/2 INCH, SPRING TYPE, 18-8, FURNISH 100 PER BOX., 600, EA; LI 090, NUT: COUPLING, ZINC, 3/8 INCH X 16 NC., 100, EA; LI 091, SCREW: CAP, STAINLESS STEEL, 5/16-18NC X 2-1/2 INCH, HEX HEAD, TYPE 18-8, SELECTION OR COMBINATION OF TYPES 302-303-304., 65, EA; LI 092, NUT: LOCKWASHER, STEEL NO. 10-32NF, SINGLE UNIT CONSISTING OF A NUT AND EXTERNAL TOOTH LOCKWASHER, FREE SPINNING, ZINC PLATED, FINE THREAD, FURNISH 100 PER BOX., 3, BX; LI 093, SCREW: CAP, STEEL, 3/8-16NC X 4 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, NOT TO EXCEED 100 PER BOX., 150, EA; LI 094, BOLT: EYE, STEEL, 3/8-16 X 1-1/4 INCH, SHOULDER, CARBON HEAT TREATED, WELDLESS, FACED SHOULDER PATTERN, STANDARD LENGTH, FULL THREADED SHANK, NC. MSC NO. 74645268 NOT ACCEPTABLE., 150, EA; LI 095, SCREW: CAP, STEEL, 1/4-20NC X 1 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, NOT TO EXCEED 100 PER BOX., 1000, EA; LI 096, SCREW: CAP, STEEL, 1/2-13NC X 1-1/2 INCH, HEX HEAD, ZINC PLATED, GRADE 5, SEMI-FINISHED, NOT TO EXCEED 100 PER BOX., 200, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. SEE ATTACHED CLAUSES DOCUMENT.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/584c7ae1a7b00ee636a49dbe7b448f60)
 

Place of Performance

Address: GRAND COULEE, WA 99133

Zip Code: 99133
 

Record

SN02965593-W 20130117/130115234316-584c7ae1a7b00ee636a49dbe7b448f60 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |