SOLICITATION NOTICE
95 -- Structural Steel Shapes
- Notice Date
- 1/24/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332111
— Iron and Steel Forging
- Contracting Office
- USACE District, Pittsburgh, 1000 Liberty Avenue, W.S. Moorhead Federal Building, 22nd Floor, Pittsburgh, PA 15222-4186
- ZIP Code
- 15222-4186
- Solicitation Number
- W911WN13T0014
- Response Due
- 1/31/2013
- Archive Date
- 3/25/2013
- Point of Contact
- Walter Staniszewski, 4123957278
- E-Mail Address
-
USACE District, Pittsburgh
(walter.a.staniszewski@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. 1. SURFACE PREPARATION. ITEMS 1 THRU 16 to be abrasive blast and prime coated. ITEMS 1 thru 16 shall be abrasive blasted to a minimum Steel Structures Painting Council SSPC-SP6, Commercial Blast, per the Steel Structures Painting Council. The blast profile should be jagged rather than quote mark peened quote mark and between 1-1/2 to 2-1/2 mils. After blasting, vacuum or blow off all dust and ensure surface remains clean before painting. Then apply one coat of CATHO-COAT 302H ZINC PRIMER as manufactured by International Devoe High Performance Coatings. Coating shall be applied per manufacturer's recommendation. The film thickness of the applied coating shall be 2.5 - 4.0 mils dry; 3.2 - 5.0 mils wet. 2. CERTIFICATION OF COMPLIANCE. Certificates of compliance shall be submitted for all items demonstrating compliance of materials with the specification requirements. The certificate(s) shall verify that the supplied material complies with the established standards for material and chemical properties for the material specified. Each certification shall be signed by an official authorized to certify on behalf of the manufacturing company and shall contain the name and address of the contractor, the contract number and the quantity and date(s) of shipment or delivery to which the certifications apply. 3. MATERIAL TEST REPORTS. Material Certification testing shall be performed and reports shall be submitted for all items supplied under the contract. The reports shall include a description of material, specifications, chemical properties and mechanical properties of the material used to manufacture the contract items. Information shall be included which renders the reports identifiable and traceable with the specific items provided under this contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA59/W911WN13T0014/listing.html)
- Place of Performance
- Address: USACE District, Pittsburgh 1000 Liberty Avenue, W.S. Moorhead Federal Building, 22nd Floor Pittsburgh PA
- Zip Code: 15222-4186
- Zip Code: 15222-4186
- Record
- SN02971557-W 20130126/130124234406-b2f44c6e7a8646946efcb7ef6e92a464 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |