SOLICITATION NOTICE
J -- REPAIR AND CALIBRATE TEKTRONIX 2465B OSCILLOSCOPE SN: B011013
- Notice Date
- 1/29/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Directorate of Contracting, Fort Rucker, AL 35362
- ZIP Code
- 35362
- Solicitation Number
- 0010285399
- Response Due
- 2/4/2013
- Archive Date
- 8/3/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010285399 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-64. The associated North American Industrial Classification System (NAICS) code for this procurement is 333997 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-02-04 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be FORT RUCKER, AL 36362 The MICC Fort Rucker requires the following items, Brand Name or Equal, to the following: LI 001, REPAIR AND CALIBRATE TEKTRONIX 2465B OSCILLOSCOPE SN: B011013. UNIT'S HAS INTERMITTENT VEERTICAL SHIFT IN THE DISPLAY. LABOR TO ISOLATE MALFUNCTIONS TO A COLD SOLDER JOINT ON THE VERTICAL FEED TO THE CRT, RESOLDER, DO A FUNCTIONAL TEST, BURN THE UNIT IN OVER WEKEND AND ALIGN THE VERTICL AND HORIZONTAL PARAMETERS., 7, HOURS; LI 002, CALIBRATION OF TEKTRONIX 2465B OSCILLOSCOPE TO US ARMY TB 9-6625-2295-35 WITH CALIBRATION CERTIFICATE, 1, EA; LI 003, UPS GROUND INSURED, 1, EA; LI 004, REPAIR AND CALIBRATE TEKTRONIX USM-488 OSCILLOSCOPE SN:7189AUNIT HAS A DISTORTED DISPLAY. LABOR TO ISOLATE DISPLAY DISTORTION TO A FAULTRY CRT, REMOVE AND REPLACE, PERFPRM ACOMPLETE ALIGMENT AND FUNCTIONAL TEST, 3, HOIURS; LI 005, AN/USM-488 CRT USED 2235 CRT, 1, EA; LI 006, FLAT FEE FOR AN/USM-488 CALIBRATION TO US ARMY TB 9-6625-2139-35 WITH CALIBRATION CERTIFICATE, 1, EA; LI 007, UPS GROUND INSURED, 1, EA; LI 008, REPAIR AND CALIBRATE HP AN/USM-181 TELEPHONE TEST SET SN: 0964A09522 CONSISTING OF 204C OSCILLATOR 403B AC VOLTMETER AND 353A PATCH PANEL. LABOR TO DETERMINE THE BATTERY PACKS IN THE 204C AND 403B ARE BAD AND OBSOLETE. FORM FIT FUNCTION REPLACEMENT IS NOT AVAILABLE.OWNER HAS DETERMINED THAT BAYTERY OPERATION IS NOT REQUIRED HOWEVER, THE POWER SUPPLIES WERE REFERENCED TO GROUND THROUGH THE BATTERY PACKS. A ZENER DIODE CIRCUIT WASMOUNTED USING APROTOTYPING PCB. A COMPLETE ALIGMENT WAS PERFORMED AND THE UNIT WAS BURNED IN FOR SEVERAL DAYS BEFORE CALIBRATION OF THE 204C AND 403B. THE PATCH PANEL IS DESIGNED CNR CALIBRATION NOT REQUIRED IN TB 43-180. REPAIR AND CALIBRATE HP AN/USM-181 TELEPHONE TEST SET SN: 0964A03428, CONSISTING OF 204C OSCILLATOR, 403 AC VOLTMETER AND 353A PATCH PANEL., 8, HOURS; LI 009, FLAT FEE FOR AN HP 204C CALIBRATION TO US ARMY TB 9-6625-2057-34 WITH CALIBRATION CERTIFICATE, 1, EA; LI 010, FLAT FEE FOR AN HP 403B CALIBRATION TO US ARMY TB 9-6625-2066-24 WITH CALIBRATION CERTIFICATE, 1, EA; LI 011, UPS GROUND INSURED, 1, EA; LI 012, REPAIR AND CALIBRATE HP AN/USM-181 TELEPHONE TEST SET SN:0964A09522 CONSISTING OF 204C OSCILLATOR, 403B AC VOLTMETER ANN 353A PATCH PANEL. LABOR TO DETERMINE THE BATTERY PACKS IN THE 204C AND 403B ARE BAD AND OBSOLETEFORM FIT FUNCTION REPLACEMENT IS NOT AVAILABLE. OWNER HAS DETERMINED THAT BATTERY OPERATION IS NOT REQUIRED. HOWEVER THE POWER SUPPLIES WERE REFERENCED TO GROUND THROUGH THE BATTERY PACKS. A ZENER DIODE CIRCUIT WAS DESIGNED TO SIMULATE THE BATTERY PACKS TO THE POWER SUPPLY AND MOUNTED USING A PROTOTYPING PCB. A COMPLETE ALIGNMENT WAS PERFORMED AND THE UNIT WAS BURNED IN FOR SEVERAL DAYS BEFORE CALIBRATION OF THE 204C AND 403B. THE PATCH PANEL IS DESIGNED CNR CALIBRATION NOT REQUIRED IN TB 43-180, 8, HOURS; LI 013, FLAT FEE FOR HP 204C CALIBRATION TO US ARMY TB 9-6625-2057-24 WITH CALIBRATION CERTIFICATE, 1, EA; LI 014, FLAT FEE FOR HP403B CALIBRATION TO US ARMY TB 9-6625-2066-24 WITH CALIBRATION CERTIFICATE, 1, EA; LI 015, UPS GROUND INSURED, 1, EA; LI 016, REPAIR MAN HOURS LABOR TO ISOLATE MALFUNCTION TO A FAULTY CHANNEL ATTENUATOR AND INPUT COUFPLING ASSEMBLY, REMOVE AND REPLACE FUNCTIONALLY TEST UNIT, 3, HOURS; LI 017, REFURBISHED 2465B INPUT ATTENUATOR AND COUPLING ASSEMBLY GE-119-2342-07-2465B, 1, EA; LI 018, CALIBRATION OF TEKTRONIX 2465B OSCILLOSCOPE TO US ARMY TB 9-6625-2295-35 WITH CALIBRATION CERTIFICATE, 1, EA; LI 019, UPS GROUND INSURED, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Rucker intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Rucker is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/aa93074f57ca5e3a1e4ef645bc1622f5)
- Place of Performance
- Address: FORT RUCKER, AL 36362
- Zip Code: 36362-5265
- Zip Code: 36362-5265
- Record
- SN02974444-W 20130131/130129234336-aa93074f57ca5e3a1e4ef645bc1622f5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |