FBODaily.com | FedBizOpps: PRESOL | 10 | GRENADE DISCHARGER

FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 02, 2013 FBO #4088
SOLICITATION NOTICE

10 -- GRENADE DISCHARGER

Notice Date: 1/31/2013
Notice Type: Presolicitation
NAICS: 332994 — Small Arms, Ordnance, and Ordnance Accessories Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
ZIP Code: 43218-3990
Solicitation Number: SPM7L412R0083
Archive Date: 4/2/2013
Point of Contact: Michele Beasley, Phone: 6146927572
E-Mail Address: michele.beasley@dla.mil
(michele.beasley@dla.mil)
Small Business Set-Aside: Total Small Business
Description: NSN# 1040-01-383-4114 2777 EA W/100% OPTION OPEN/CLOSE 2/15/13 - 3/18/13 ______________________________________________ ITEM DESCRIPTION FOR PR: 0045277315 DISCHARGER, GRENADE: THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD. __________ ENGINEERING EXCEPTION DATA __________ INSPECTION FOR CONFORMANCE TO CARC REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-53072. MIL-C-46168 HAS BEEN CANCELLED AND REPLACED WITH MIL-DTL-53039 OR MIL-DTL-64159. ______ END OF ENGINEERING EXCEPTION DATA _______ THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS. IF REQUIRED BY CONTRACT, CONTRACTOR FIRST ARTICLE TEST APPLIES. PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN THE TECHNICAL DATA PACKAGE. CLAUSE I09A01 (FAR CLAUSE 52.209-1) QUALIFICATION REQUIREMENTS IS APPLICABLE. THE AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR EVALUATION PRIOR TO CONTRACT AWARD. PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD 52.246-9004 MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES FROM EACH SUBCONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS CONTRACT. FIVE (5) PVT SAMPLES WILL BE REQUIRED TO BE IDENTIFIED TO THOSE SUBCONTRACTORS WHEN THEY ARE SENT IN FOR TESTING. CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED. THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT, APPLIES. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil PROCESS, PROCEDURES, AND/OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY SPECIFICATION(S) OR DRAWINGS APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE ACTIVITY RESPONSIBLE FOR THE ADMINISTRATION OF THE CONTRACT. POST AWARD PREPRODUCTION APPROVAL VERIFYING THE REQUIREMENTS OF CITED SPECIFICATION(S) IS REQUIRED. I/A/W QAP 16236 PHOS-OUTLINE-CARC REFNO AMEND NR A DTD 10/15/10 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1015 REFNO AMEND NR G DTD 06/30/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1015-Z54-0029-002 REFNO AMEND NR G DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1016 REFNO AMEND NR G DTD 06/30/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1017 REFNO AMEND NR E DTD 09/12/05 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1017-Z54-0029-010 REFNO AMEND NR E DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1018 REFNO AMEND NR F DTD 09/13/05 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-1019 REFNO AMEND NR F DTD 09/26/05 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400 BASIC AMEND NR C DTD 04/03/02 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400 REFNO AMEND NR DTD 03/30/12 TYPE NUMBER I/A/W QAP 81361 13-12-400 REFNO AMEND NR B DTD 07/11/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400-Z54-0024-001 REFNO AMEND NR C DTD 03/22/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400-Z54-0025-001 REFNO AMEND NR C DTD 06/22/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400-Z54-0026-001 REFNO AMEND NR C DTD 04/07/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400-Z54-0029-001 REFNO AMEND NR C DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-400-Z54-0029-011 REFNO AMEND NR B DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-401 REFNO AMEND NR C DTD 06/30/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-401-Z54-0029-004 REFNO AMEND NR C DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-402 REFNO AMEND NR C DTD 06/30/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-402-Z54-0029-005 REFNO AMEND NR C DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-403 REFNO AMEND NR B DTD 06/30/06 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-403-Z54-0029-006 REFNO AMEND NR B DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-886 REFNO AMEND NR C DTD 09/08/11 TYPE NUMBER I/A/W QAP 81361 13-12-886 REFNO AMEND NR B DTD 11/17/10 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-886-Z54-0029-007 REFNO AMEND NR C DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-887 REFNO AMEND NR C DTD 09/08/11 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-888 REFNO AMEND NR C DTD 09/08/11 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-889 REFNO AMEND NR C DTD 09/08/11 TYPE NUMBER I/A/W DRAWING NR 81361 13-12-890 REFNO AMEND NR C DTD 09/08/11 TYPE NUMBER I/A/W DRAWING NR 81361 228-0057-005 REFNO AMEND NR DTD 06/22/11 TYPE NUMBER I/A/W DRAWING NR 81361 P13-12-400-Z54-0029-012 REFNO AMEND NR B DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 Z54-0029-003 REFNO AMEND NR DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 Z54-0029-008 REFNO AMEND NR DTD 03/30/12 TYPE NUMBER I/A/W DRAWING NR 81361 Z54-0029-009 REFNO AMEND NR DTD 03/30/12 TYPE NUMBER I/A/W SPEC NR MIL-C-46168D(3) NOT 1 REFNO AMEND NR 3 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR MIL-DTL-53072D(1) REFNO AMEND NR 1 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR MIL-DTL-5541F REFNO AMEND NR F DTD 10/02/06 TYPE NUMBER I/A/W SPEC NR QPL-23377-19 NOT 1 REFNO AMEND NR 19 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53022-14 NOT 1 REFNO AMEND NR 14 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53030-7 NOT 1 REFNO AMEND NR 7 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53039-22 NOT 1 REFNO AMEND NR 22 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53084-6 NOT 1 REFNO AMEND NR 6 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-64159-13 NOT 1 REFNO AMEND NR 1 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-85582-5(1) NOT 1 REFNO AMEND NR 1 DTD 10/03/06 TYPE NUMBER
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L412R0083/listing.html)
Record: SN02976646-W 20130202/130131234324-2cdbab2a2a86e90ac0cc219ff5d0cfac (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

10 -- GRENADE DISCHARGER