Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 03, 2013 FBO #4089
SOLICITATION NOTICE

60 -- RECOVERY--60--RECOVERY - Head End Equipment

Notice Date
2/1/2013
 
Notice Type
Combined Synopsis/Solicitation
 
Contracting Office
9410 Jackson Loop, Fort Belvoir, VA 22060
 
ZIP Code
22060
 
Solicitation Number
0010285466-01
 
Response Due
2/8/2013
 
Archive Date
8/7/2013
 
Point of Contact
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 
E-Mail Address
Clientservices@fedbid.com;
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010285466-01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-64. The associated North American Industrial Classification System (NAICS) code for this procurement is 335921 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-02-08 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Myer, VA 22211 The MICC Fort Belvoir requires the following items, Brand Name or Equal, to the following: LI 001, Silver Network Interface Unit (SNIU), 19-inch rack-mountable, 1RU high,requires 12 to 48 VDC. RS-422 and multi-mode fiberoptic, Silver Network connections., 1, EA; LI 002, Uninterruptible Power Supply with Interruption Relay Output Unit for 115VAC input, includes 1 A.hr. gel cell battery,. Output 13.7 VDC @ 1.2 amp. Rated for indoor use only. UPS-PFI, 1, EA; LI 003, Network Managers (Silver, Sennet, Crossfire and MX) on CD. Run as Windows applications. CD includes Alarm Integration Module software (requires separately purchased hardware key for normal operation), Network Manager SDK (simulator, API documentation, and sample code), and Status,Event Log, and Plot tools. Up to 10 Network Managers may run on a PC. Purchase of CD licenses one PC to run Network Manager. Windows XP Pro and Windows 7 compatible., 1, EA; LI 004, Network power supply, 85-245 VAC/24 VDC @ 1.25 A, 50/60 Hz, indoor, without optional power cord., 1, EA; LI 005, North American power cord, 12V, 10A 2.3m (7.5ft), standard NEMA 5-15 plug, equipment end per IEC60230-C13, 1, EA; LI 006, StarNeT-1000 Software and Hardware Bundle - Small System - Licenses StarNeT 1000 on one XP computer. Handles a maximum of 32 processors/transponders, supports TCP/IP, supports configurations with up to 64 networked stations (each StarNeT workstation requires a separate license) and pass through of sensor data to other head-ends via relays or TCP/IP. Includes default generic text database for initial setup. This is a bundled system, and includes: 00SP1700 - Commercial Computer, X0298 - Windows 7 Pro (on CD), 00SP2312 - 19" Colour Monitor LCD Desktop, 1, EA; LI 007, Creation of custom site database and first map. Factory prepared to supplied specifications., 1, EA; LI 008, Creation of second and subsequent maps. Factory prepared to supplied specifications., 2, EA; LI 009, 4 Port serial Card, RS-232, DB-9M Connectors, 1, EA; LI 010, I/O Transponder. Supports a variety of I/O up to 64 inputs and 64 outputs,24VDC input power required. Includes echo check terminator (PLC-420)., 1, EA; LI 011, Network power supply, 85-245 VAC/24 VDC @ 1.25 A, 50/60 Hz, indoor, without optional power cord., 1, EA; LI 012, North American power cord, 12V, 10A 2.3m (7.5ft), standard NEMA 5-15 plug, equipment end per IEC60230-C13, 1, EA; LI 013, Low Current Relay Output Module. Provides a total of 16 low current, gold plated form C, dry contact outputs 24V @ 1A. Note- uses two DB-37 connectors with 8 relay outputs per DB-37 connector. Includes 4" EchoCheck cable. (I/O-202), 2, EA; LI 014, Field Landing Cable/Terminal Blocks kit, consisting of one MOD -210-30 (30") cable and a terminal breakout circuit card assembly which mounts on a customer supplied DIN rail (handles up to 14 AWG wire). One kit required for each bank of 16 I/O points for I/O modules, except one cable required per 8 relay outputs from I/O-202. Note: If a longer cable is required between the I/O module and terminal block order MOD-210-72 or MOD-210-108. (MOD-211), 4, EA; LI 015, 108" Field Landing Ribbon Cables. 28 AWG 36 conductor, ribbon cable and DB-37 connectors at ends. One cable assembly required per each bank of 16 I/0 points for I/O modules, except one cable required per 8 relay outputs from I/O-202 (MOD-210-108), 4, EA; LI 016, 19" PLC card Cage. Holds a total of 15 PLC-420 or I/O cards EIA 19" rack mount., 1, EA; LI 017, OmniTrax Sensor Processor, provides electronic processing for two sensor cable sets, in a painted aluminum CSA Type 4 (equivalent to NEMA 4/IP 66) enclosure, with backup battery, without any auxiliary cards., 3, EA; LI 018, Telecom style protective enclosure for above ground field mounting of Processor enclosure. Includes tamper switch and wiring harness (A4HA0100), mounting brackets, mounting hardware and ground stake. Removable, lockable cover (lock not supplied), light green enamel, 42.5 x 27.3 x 98.4 cm (16.8" x 10.8" x 38.8")., 3, EA; LI 019, Comm card - Multi Mode Fiber Optic, connects on processor header, supports two data paths (4 fibers). Mounting hardware included. NOTE: A Communications card is required per Sensor Processor for networked data communications either externally or over OmniTrax Sensor Cables. G1 Silver., 3, EA; LI 020, Network power supply, 115/230 VAC, 50/60 Hz input, 48 VDC/100 W output. Mounted in a painted aluminum CSA Type 4 (Equivalent to NEMA 4/IP 66) enclosure 26 x 23 x 13 cm (11 x 9 x 5 in.), 1, EA; LI 021, SC1 cable network (power passing) decoupler kit. For use in network applications, passes network data signals and power. Includes two decouplers and three pieces of heatshrink tubing., 3, EA; LI 022, SC1 loop-back termination kit. Includes SC1 loop-back cable assembly, two standalone decouplers, two male TNC connectors, ten ferrite beads, and heatshrink., 1, EA; LI 023, Kit of four gas-capsule lightning protectors for OmniTrax processor sensor cables. Includes add-on buss bar with ground lug, 4 gas capsules, and one meter of #10 AWG ground strap. One kit handles two cable sets attached to one OmniTrax processor. Compatible with SC1, SC2, and OC2 cables., 3, EA; LI 024, TOOL - Connector tool kit, includes crimp tool and cable preparation tools for SC1 and SC2 cables, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Belvoir intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Belvoir is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposals, representations and certifications, etc.). You may attach documents with your offer when placing a bid. After you begin the bidding process the attachments feature is located on the 2nd page ?Line Items? or you may submit them to clientservices@fedbid.com to supplement your Bid (e.g., in response to a ?Brand name or Equal/Meet or Exceed? Requirement). Failure to provide any required documents prior to the proposal due date and time will deem your offer non-responsive and ineligible for award. In addition to providing pricing through the marketplace, Sellers must include certain?non-pricing?information as document(s) attached to their Bid, so they are received no later than the closing date and time of this Buy. Pricing will not be accepted if it is included in the attachment(s). Attachment(s) can total no more than 20 MB, whether multiple files or one file, and may be zipped to decrease their size. A Seller's failure to comply with these terms may result in its Bid being determined to be non-responsive. Offer evaluation will be in accordance with: FAR Sub-Part 15.101-2 -- Lowest Price Technically Acceptable Source Selection Process (a) The lowest price technically acceptable source selection process is appropriate when best value is expected to result from selection of the technically acceptable proposal with the lowest evaluated price. (b) When using the lowest price technically acceptable process, the following apply: (1) The evaluation factors and significant subfactors that establish the requirements of acceptability shall be set forth in the solicitation. Solicitations shall specify that award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. If the contracting officer documents the file pursuant to 15.304(c)(3)(iii), past performance need not be an evaluation factor in lowest price technically acceptable source selections. If the contracting officer elects to consider past performance as an evaluation factor, it shall be evaluated in accordance with 15.305. However, the comparative assessment in 15.305(a)(2)(i) does not apply. If the contracting officer determines that a small business? past performance is not acceptable, the matter shall be referred to the Small Business Administration for a Certificate of Competency determination, in accordance with the procedures contained in subpart 19.6 and 15 U.S.C. 637(b)(7)). (2) Tradeoffs are not permitted. (3) Proposals are evaluated for acceptability but not ranked using the non-cost/price factors. (4) Exchanges may occur (see 15.306). The following clauses shall apply: 52.204-99 (System for Award Management), 52.209-6 (Protecting the Government's Interest When Sub-Contracting), 52.204-10 (Reporting Executive Compensation and First-Tier Subcontract Awards), 52.212-4 (Contract Terms and Conditions ? Commercial Items), 52.212-5 (Contract Terms and Conditions Required to Implement Statues or Executive Orders ? Commercial Items), 52.219-28 (Small Business Representation), 52.222-3 (Convict Labor), 52.222-19 (Child Labor), 52.222-21 (Prohibition of Segregated Facilities), 52.222-26 (Equal Opportunity), 52.222-36 (Affirmative Action for Workers with Disabilities), 52.223-18 Ban on Texting and Driving, 52.225-1 (Buy American Act Supplies), 52.225-13 (Restrictions on Certain Foreign Purchases), 52.232-33 (Payment by Electronic Funds Transfer ?Central Contractor). The following DFARS clauses shall apply: 252.211-7003 ALT I (Item Identification and Valuation), 252.212-7001 (Contract Terms and Conditions Required to Implement Statues or Executive Orders), 252.225-7001 (Buy American Act and Balance of Payments), 252.225-7002 Qualifying Country Sources as Subcontractors, 252.232-7003 (Electronic Submission of Payment Requests), 252.243-7001 (Pricing of Contract Modifications), 252.247-7023 ALT III (Transportation of Supplies by Sea), 252.232-7010 (Levies on Contract Payments). DFAR Sub-Part 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (MAR 2008) (a) Definitions. As used in this clause? (1) ?Contract financing payment? and ?invoice payment? have the meanings given in section 32.001 of the Federal Acquisition Regulation. (2) ?Electronic form? means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area Workflow (WAWF) or another electronic form authorized by the Contracting Officer. (3) ?Payment request? means any request for contract financing payment or invoice payment submitted by the Contractor under this contract. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/. (c) The Contractor may submit a payment request and receiving report using other than WAWF only when? (1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF; (2) DoD is unable to receive a payment request or provide acceptance in electronic form; (3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer?s determination with each request for payment; or (4) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System). (d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract. (e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL IAW FAR 52.204-99 System for Award Management (SAM) Registration (August 2012) (Deviation), the offeror must be registered in the System for Award Management (SAM), which took the place of the Central Contractors Registration (CCR); SAM consolidated the Federal Procurement Systems and the Catalog of Federal Domestic Assistance. Currently CCR, FedReg, ORCA and EPLS have been migrated into SAM. If the offeror's information is already in CCR, you do not have to reload your information in the SAM website; however, if the offeror is not registered under SAM the offeror may register at the SAM website http://www.sam.gov. More information can be found at http://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls. IAW 52.204-8 Annual Representation and Certification, the offeror is required to input their Representations and Certifications into the online representation and certifications application (ORCA) database which is located at https://orca.bpn.gov/ 5152.233-4000 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accounting Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Send protests (other than protests to the contracting officer) to: ? Address: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 ? Fax: (256) 450-8840 ? The AMC-level protest procedures are found at: Web Address: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp If Internet access is not available contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 45 calendar days after submission
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/73738a5c8c957addee3e8828bfefe35b)
 
Place of Performance
Address: Fort Myer, VA 22211
Zip Code: 22211
 
Record
SN02977750-W 20130203/130201234156-73738a5c8c957addee3e8828bfefe35b (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.