MODIFICATION
73 -- Galley Supplies
- Notice Date
- 2/21/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- Bldg 191 Code 250M, Mayport, FL 32228
- ZIP Code
- 32228
- Solicitation Number
- N68836-13T-0056
- Response Due
- 1/29/2013
- Archive Date
- 7/28/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is N68836-13T-0056 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-64. The associated North American Industrial Classification System (NAICS) code for this procurement is 326199 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-01-29 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be PASCAGOULA, MS 39567 The FLC - Jacksonville requires the following items, Brand Name or Equal, to the following: LI 001, FACE SHIELD, Allpoints P/N 85-1180 or CCC# Q-310, head gear with face shield, 6, EA; LI 002, CHAMPAGNE FOUNTAIN, Apex P/N 4009-SS or Royal Princess P/N WB0600021, 7 gallon, 31 in H, 21 in Dia, complete waterfall 3rd tier, silver bow tie trim, inward spigots, lights in the center and base, highly polished all stainless steel, 1, EA; LI 003, BATTER DISPENSER, Belshaw Type K Pancake Dispenser, handheld, 5.5 lb batter capacity, aluminum hopper, stainless stell plunger and cylinder, 2, EA; LI 004, HAIR NET, San Jamar P/N DHN500, nylon, 28 inch, brunette, box of 144/10 box per case, 1, CS; LI 005, PAPER CAP, San Jamar P/N DRC100, disposable overseas cap, touch and seal adjustment, with sweatband, 100 per box/10 box per case, 1, CS; LI 006, GLOVES, San Jamar P/N P31, neoprene, 31 inch soulder length, seamless one piece, one size fits all, each equals 1 pair, 3, EA; LI 007, BIB APRON, San Jamar P/N 615NBA-BK, neoprene, 36 in x 43 in, heat/fire/cut resistant, no pockets, black, 3, EA; LI 008, POT HOLDER, San Jamar P/N 803PG, pan grabber, bakers pad with wrist strap, 8.5 x 11 in, terry cloth extra thick layer outside, Bestex interior with inner steam barrier, machine washable, protects to 375F, 4, DZ; LI 009, GLOVES, San Jamar P/N SG10-S, Spectra Seafood Glove, size small, cut resistant with optical glass core, fits either hand, contains Double Guard anti-microbial agent, meets OSHA standard, 2, EA; LI 010, GLOVES, San Jamar P/N SG10-M, Spectra Seafood Glove, size Medium, cut resistant with optical glass core, fits either hand, contains Double Guard anti-microbial agent, meets OSHA standard, 2, EA; LI 011, GLOVES, San Jamar P/N SG10-L, Spectra Seafood Glove, size Large, cut resistant with optical glass core, fits either hand, contains Double Guard anti-microbial agent, meets OSHA standard, 2, EA; LI 012, GLOVES, San Jamar P/N SG10-XL, Spectra Seafood Glove, size extra large, cut resistant with optical glass core, fits either hand, contains Double Guard anti-microbial agent, meets OSHA standard, 2, EA; LI 013, SELF-SERVE DISPENSER, Cambro P/N 9RS9110, organizer rack, 9 bins, 20-1/8 x 21-3/8 x 14-1/4 in, polyethylene, black, holds up to 10 lbs, can be placed on counter or mounted on wall, 6, EA; LI 014, ICE SCULPTURE MOLDS, Carlisle P/N SEA102, EAGLE, made with EZ-Cut Bead to allow and easy opening, 4, EA; LI 015, SUPREME CROCK, Carlisle P/N 037203, 2.7 qt crock with lid, SAN, NSF, Black, 48, EA; LI 016, CROCK LID, Carlisle P/N 020230, 1.5/2.7 qt, round replacement lid, clear, NSF, 10, EA; LI 017, LADLE, Carlisle P/N 029603, 13-1/2 in, 1-oz ladle with plain handle, NSF, Black, 12, EA; LI 018, LADLE, Carlisle 029503, 9-1/2 in, 1 oz, ladle with plain handle, NSF, Black, 12, EA; LI 019, LADLE ASST., Carlise P/N 028703, pack includes 12 ladles, 4-plain, 1-blue cheese, 1-ranch, 1-french, 1-house, 1-caesar, 1-italian, 1-thousand island, 1-low cal, Black, 4, ST; LI 020, SERVING SPOON, Carlisle P/N 443103, 15 inch perforated, polycarbonate, black, NSF, 24, EA; LI 021, SERVING SPOON, Carlisle P/N 442003, 13 inch, solid, polycarbonate, black, NSF, 24, EA; LI 022, SERVING SPOON, Carlisle P/N 442103, 13 inch, perforated, polycarbonate, black, NSF, 24, EA; LI 023, SERVING SPOON, Carlisle P/N 441003, 11 inch, solid, polycarbonate, black, NSF, 24, EA; LI 024, SERVING SPOON, Carlisle P/N 441103, 11 inch, perforated, polycarbonate, black, NSF, 24, EA; LI 025, UTILITY TONGS, Carlisle P/N 471203, 12 inch, high heat plastic, black, NSF, 36, EA; LI 026, UTILITY TONGS, Carlisle P/N 470903, 9 inch, high heat plastic, black, NSF, 36, EA; LI 027, ICE SCULPTURE MOLDS, Carlisle P/N SFI102, FISH, made with EZ-Cut Bead to allow and easy opening, 3, EA; LI 028, MIXING PADDLES, Carlisle P/N 40349, 48 inch paddle scraper, stainless steel, NSF, 8, EA; LI 029, FRENCH WHIP, Carlisle P/N 40682, 48 inch, 18/8 stainless steel, 10, EA; LI 030, FRENCH WHIP, Carlisle P/N 40683, 18 inch, 18/8 stainless steel, 8, EA; LI 031, FOOD PREP BRUSH, Carlisle P/N 4039202, 3 inch flat pastry brush, nylon bristles, white, plastic handle, 5, EA; LI 032, FOOD PREP BRUSH, Carlisle P/N 4039002, 1.5 inch flat galaxy brush, nylone bristles, white, plastic handle, 5, EA; LI 033, BEVERAGE SERVICE BRUSH, Carlisle 4067300, sarta urn brush, 24 inch, white, 5, EA; LI 034, BEVERAGE SERVICE BRUSH, Carlisle 4015400, sarta creamer brush, 1.5 inch bristles, white, 5, EA; LI 035, THERMOMETER, Cooper Instrument P/N 480-0-8, dual temp infrared and probe thermometer, -27 to 428 deg F/-33 deg to 220 deg C retractable prove; -67 to 626 def F -55 deg to 330 deg C, temperature accuracy IR +/- 4 deg F/+/- 2 deg C whichever is greater, probe +/- 2 deg F/+/- 1 deg C whichever is greater, auto off, low battery indiator, CE certified, 2, EA; LI 036, SERVING FORK, Dexter Russell P/N S205B-PCP, 13 inch cooks fork, 5 in stainless steel blade, black polypropylene handle, 6, EA; LI 037, KNIVES, Dexter Russell P/N S145-10C-PCP, Sani-Safe 10 inch cooks knife, blue polypropylene handle, HACCP color coded, stain free, high carbon steel blade, textured, NSF, 30, EA; LI 038, KNIVES, Dexter Russell P/N S145-8R-PCP, Sani-Safe 8 inch cooks knife, red polypropylene handle, stain free, high carbon steel blade, textured, NSF, 6, EA; LI 039, SLICER KNIVES, Dexter Russell P/N S140N-10GE-PCP, Sani-Safe 10 inch narrow duo-edge slicer, polypropylene handle, stain free, high carbon steel blade, textured, 6, EA; LI 040, SLICER KNIVES, Dexter Russell P/N S140N-10SC-PCP, Sani-Safe 10 inch narrow scalloped edge slicer, polypropylene handle, stain free, high carbon steel blade, textured, 12, EA; LI 041, PRODUCE KNIVES, Dexter Russell P/N S186PCP, Sani-Safe 6 inch vegetable/produce knife, stainless steel, 12, EA; LI 042, DOUGH CUTTER, Dexter Russell P/N S196PCP, Sani-Safe 6 in x 3 in dough cutter/scraper, polypropylene handle, stainless steel blade, 12, EA; LI 043, PIZZA CUTTER, Dexter Russell P/N P177A-5PCP, Sani-Safe 5 inch cutter, polypropylene handle, replaceable blade, 12, EA; LI 044, TURNER, Dexter Russell P/N S286-8PCP, Sani-Safe 8 in x 3 in cake turner, stainless steel blade, offset, white polypropylene handle, 12, EA; LI 045, TURNER, Dexter Russell P/N PS286-8PCP, Sani-Safe 8 in x 3 in perforated turner, stainless steel blade, offset, white polypropylene handle, 12, EA; LI 046, SHARPENING STONE, Dexter Russell P/N 07080, 3-way sharpening stone, 3-rod ceramic knive sharpener, 3 levels of coarseness, 3, EA; LI 047, BAKERS SCALE, Edlund P/N BDSS-16, 16 lbs x 1.4 oz graduation, stainless steel construction, includes oversize footed plastic scoop, counterweight and measureing weights, 2, EA; LI 048, KNIFE HOLDER, Edlun P/N KR-700, knife rack with skirt, with pop-out high impact, high temp inserts, dishwasher safe, includes full length stainless steel back plate, holds 5 french knives, 1 cleaver, 4 smaller knives, and 2 steels, NSF, 4, EA; LI 049, CAN OPENER, Edlund P/N S-11C, manaul clamping base model can opener, NSF, 2, EA; LI 050, KNIFE SET, Victorinox P/N 46550, Swiss Army knife set, garnishing kit with black handles, 6 piece: vegetable peeler, decorating knife, fruit decorator, channel knife, melon baller, lemon zester, and canvas roll, black nylon handles, 6, EA; LI 051, PASTRY BAGS, Matfer Bourgeat P/N 165003, disposable polyethylene pastry bags, roll of 200 bags with three layers of polyethylene provide greater strength, 21-5/8 in long, 5 lbs, 5 oz, 1, EA; LI 052, DECORATING TIPS, Matfer Bourgeat P/N 166003, 24 piece set, 12 plain (U1 - U12) and 10 scalloped (A6, A8, B6, B8, C6, C8, D6, D8, E6, and E8), 1 #2 leaf and 1 tube for yule logs, 2, EA; LI 053, SUGAR POURER, Tablecraft P/N 57S, 12 oz, fluted glass, stainless steel side flap top, 4, DZ; LI 054, SALT & PEPPER SHAKERS, Tablecraft P/N 155S&P, 2 oz, paneled glass, stainless steel tops, 6, DZ; LI 055, PAPER NAPKIN DISPENSER, Tablecraft P/N 221, stainless steel, full size, 4-3/4 in x 3-7/8 in x 7-1/2 in, fits napkins 3-3/8 in x 6-5/8 in, 4, DZ; LI 056, THERMOMETER, Taylor P/N 3512, TruTemp Instant Read Themometer, 1 in dial type with stem 0 deg to 220 deg F temperature capacity, magnified lens, pocket case with clip, NSF, 48, EA; LI 057, THERMOMETER, Taylor P/N 5932, over thermometer, 3.25 in dial face, 200 to 500 deg F, stainless stell, hangs or stands, NSF, 10, EA; LI 058, THERMOMETER, Taylor P/N 5121N, utility wall themometer with suction cup mount, -40 to 120 deg F, weather resistant, 12, EA; LI 059, THERMOMETER, Taylor P/N 5925N, refrigerator freezer thermometer with magnified face, -40 to 60F, 4-7/8 in x 1-1/4 in tube display, shatterproof, clear plastic lens protects glass, non-toxic filling, hangs or stands, 36, EA; LI 060, CHAFING DISH, Vollrath P/N 46050, classic full size chafer, brass trim, oblong 9 qt, stainless, mirror finish, brass cast legs, complete with brass trim rack, dripless water pan, (2) 1.2 in SP3 food pan, dome cover, two fuel holders, 24, EA; LI 061, CHAFING DISH, Vollrath P/n 46075, round classic design Marmite, 7.25 qt, stainless with brass cast legs, complete with brass trim rack, stainless water pan, 7.25 inset, flat cover with strap handle and fuel holder, 2, EA; LI 062, FOOD PAN, Vollrath P/N 9004410, super pan full size, 4 in deep, high-temp amber plastic, top flange corners with concave indentation, anti-jamming, ramped sides, reverse form flattened edge, framing shoulder, interchanges with SP3 s/s pan line, NSF, meets gastonorm (EN 631-1) standard, 4, EA; LI 063, FOOD PAN, Vollrath P/N 9002410, super pan full size, 2.5 in deep, high-temp amber plastic, top flange corners with concave indentation, anti-jamming, ramped sides, reverse form flattened edge, framing shoulder, interchanges with SP3 s/s pan line, NSF, meets gastonorm (EN 631-1) standard, 4, EA; LI 064, STEAM PAN, Vollrath P/N 30042, super pan II, full size, 4 in deep, 22 gauge stainless steel, 21 in length x 13 in width, 14 qt capacity, 12, EA; LI 065, STEAM PAN, Vollrath P/N 30022, super pan II, full size, 2.5 in deep, 22 gauge stainless steel, 21 in length x 13 in width, 8.3 qt capacity, 12, EA; LI 066, STEAM PAN, Vollrath P/N 30122, super pan II, 2/3 size, 2.5 in deep, 22 gauge stainless steel, 21 qt capacity, 12, EA; LI 067, STEAM PAN, Vollrath P/N 30542, super pan II, half size long, 4 in deep, 22 gauge stainless steel, 24, EA; LI 068, STEAM PAN, Vollrath P/N 30522, super pan II, half size long, 2.5 in deep, 22 gauge stainless steel, 24, EA; LI 069, STEAM PAN, Vollrath P/N 30442, super pan V, fourth size, 4 in deep, 22 gauge stainless steel, 12, EA; LI 070, STEAM PAN, Vollrath P/N 30043, full size perforated, 4 in deep, 22 gauge stainless steel, 12, EA; LI 071, STEAM PAN, Vollrath P/N 30023, full size perforated, 2.5 in deep, 22 gauge stainless steel, 12, EA; LI 072, STEAM PAN, Vollrath P/N 30243, half size perforated, 4 in deep, 22 gauge stainless steel, 12, EA; LI 073, BAKING SHEETS, Vollrath P/N 5315, aluminum sheet pan, 17-3/4 x 25-3/4 x 1 in, 12 gauge aluminum alloy, natural finiah, 20, EA; LI 074, ROAST PAN, Vollrath P/M 68362, roasting pan bottom wiht straps, 29 qt aluminum, 24 x 18 x 4-3/4 in, 8, EA; LI 075, FOOD DISHER, Vollrath P/N 47140, size 8, gray plastic handle, 4 oz capacity, stainless, 6, EA; LI 076, FOOD DISHER, Vollrath P/N 47142, size 12, green plastic handle, 2-2/3 oz capacity, stainless, 6, EA; LI 077, FOOD DISHER, Vollrath P/N 47146, size 30, black plastic handle, 1 oz capacity, stainless, 6, EA; LI 078, LADLE, Vollrath P/N 58600, solid ladle with 17 in hooked handle, 72 oz, stainless steel, 3, EA; LI 079, LADLE, Vollrath P/N 58480, solid ladle with 12-5/8 in hooked handle with 4 in bowl, 8 oz, stainless steel, 12, EA; LI 080, LADLE, Vollrath P/N 58520, solid ladle with 9-7/8 in hooked handle, 1-1/2 oz, stainless steel, 2-3/8 in bowl, 12, EA; LI 081, TONGS, Vollrath P/N 4781220, coated handle, rool touch tongs, 12 in antimicrobial, egonomic, black, 24, EA; LI 082, TURNER, Vollrath P/N 48080, hamburger turner, stainless steel, wood handle, 3 in blade width, 7 in long, 4, EA; LI 083, MEASURING CUP, Vollrath P/N 68351, 2 qt aluminum, 17 ga, NSF, 6, EA; LI 084, CUTTING BOARD SET, Vollrath P/N 5200211, multi color, (6) 15 x 20 x 1/2 in, heat and stain resistant, 4, EA; LI 085, CUTTING BOARD RACK, Vollrath P/N 52100, 8 in l x 10 in w, 9 in h, stainless steel, holds 6 cutting boards, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-60 and DFARS Change Notice 20120724. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The NAICS code is 326199 and the Small Business Standard is 750. FAR 52.247-34, F.o.b. Destination applies New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.225-7000: Buy American Act-Balance of Payments Program Certificate 252.232-7010: Levies on Contract Payments 5252.NS-046P: Prospective Contractor Responsibility 52.212-4: Contract Terms and Conditions-Commercial Items 52.212-1: Instructions to Offerors-Commercial Items 52.252-1:Solicitation Provisions Incorporated by Reference 52.252-2: Clauses Incorporated by Reference 52.237-2: Protection of Government Buildings, Equipment, and Vegetation. Control of Government Personnel Work Product (April 1992) Buy American Act & Balance of Payments (Oct 2011) Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/09fa919fc9c1883616674945e2f70d5f)
- Place of Performance
- Address: PASCAGOULA, MS 39567
- Zip Code: 39567
- Zip Code: 39567
- Record
- SN02992716-W 20130223/130221234507-09fa919fc9c1883616674945e2f70d5f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |