MODIFICATION
Z -- St. Stephen's 135 Ton Bridge Crane Rehabilitation - Updated Scope of Work - Responses to Questions - Updated Specification - St. Stephen Crane Control Amendment
- Notice Date
- 3/20/2013
- Notice Type
- Modification/Amendment
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Charleston, 69-A Hagood Avenue, Charleston, South Carolina, 29403-5107, United States
- ZIP Code
- 29403-5107
- Solicitation Number
- W912HP-13-R-0013
- Archive Date
- 3/29/2013
- Point of Contact
- Marshall Burns, Phone: 843-329-8194, Walter Gordon, Phone: 8433298082
- E-Mail Address
-
marshall.burns@usace.army.mil, walter.l.gordon@usace.army.mil
(marshall.burns@usace.army.mil, walter.l.gordon@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- St, Stephen Crane Control Amendment Crane Rehabilitation Specifications Response to Questions Updated Scope of Work This change to the combined synopsis/solicitation provides notice to prospective offerors that the drawings (GIF files) attached with the original posting were INCOMPLETE. Also, the site visit roster of attendees is posted as an attachment to this posting. This second amendment to the Combined Synopsis/Solicitation is extending the due date of the Proposal's. Please see the bottom paragraphs for the new date. The third amendment to the Combined Synopsis/Solicitation adds Updated Specifications, answers to questions submitted and updated Scope Of Work. INSTRUCTIONS TO OFFERORS PERTAINING TO DRAWINGS: Due to filesize constraints of FedBizOpps, prospective offerors are instructed to individually request electronic delivery of the full set of drawings. Requests should be made via email to: Eugene.M.Burns@usace.army.mil and henry.wigfall@usace.army.mil. In your request you should specify the personnel requiring delivery of the drawings files. Each individual requiring delivery must have an email address. Once a request is received the files will be delivered via Safe Access File Exchange (SAFE), an Army file sharing system. Recipients will then receive a message from 'no-reply@amrdec.army.mil'--the download instructions will be contained within. Files should be downloaded ASAP. Fourteen (14) days from initial delivery the file will expire and be no longer available for retrieval. THIS IS A COMBINED SYNOPOSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6 STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. This solicitation is a Request for Proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-39. Submit written proposals on RFP number W912HP-R-0013. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310. This requirement is being Solicited as a Full and Open/Unrestricted Requirement. The Government intends to award a Firm-Fixed-Price (FFP). The Contractor must be registered in DOD System for Award Management (SAM) prior to award of this solicitation. The solicitation and any subsequent amendments will only be available in electronic format, downloadable from the internet. No CD-ROMs or hardcopy documents will be distributed. Bidders must be registered in SAM and at the Federal Business Opportunity Homepage (www.fbo.gov) in order to view or download the available documents. It is the responsibility of bidders to monitor the website for notices and amendments. If you have any questions or need assistance contact(s) Marshall Burns at 843-329-8194 (marshall.burns@usace.army.mil). The full text of a FAR Provision or clause may be accessed electronically at http://acqusition.gov/comp/far/index.html Delivery: Delivery terms shall be FOB Destination. Period of Performance: The Period of Performance shall be 120 days from the date of award. Instructions, Conditions & Notices to Offeror Evaluation Criteria: The Acquisition Strategy used for this solicitation will be utilizing a Lowest Price Technically Acceptable Process as outlined in the Federal Acquisition Regulation (FAR) Subpart 15.101-2. Award shall be made to the Contractor whose proposal is technically acceptable, and offers the lowest price to the Government. The Government will evaluate proposals based on the following evaluation criteria: 1) Price and 2) Technical. In order to be considered technically acceptable, contractors will submit the following items with their proposal: 1.) Completed Bid Sheet (Last Page of RTA Package) 2.) Statement of Compliance- Appendix K 3.) Proposal Data Sheet- Appendix A (attached to Synopsis) 4.) Past Performance- Appendix B (attached to Synopsis) - Submit 3 to 5 projects for evaluation according to format specified 5.) Past Performance Questionnaires-Project References in the Past 3 Years- Minimum 3 - Appendix C (attached to Synopsis) 6.) Corporate Relevance- Appendix D (attached to Synopsis)- the Government will review the example projects provided by the Offeror to evaluate and rate the recent experience of the Offeror in similar projects. Similar means crane or crane rehabilitation projects similar in size, scope and complexity of this project. Offerors are encouraged to provide descriptive analysis of why they feel their example projects meet the criteria for corporate relevant specialized experience. If the Offeror cannot provide suitable relevant experience and the evaluators consider that the information provided indicates that the Offeror has little to no relevant experience, a determination will be made as to the risk this lack of corporate experience presents to the Government and the proposal may be rated UNACCEPTABLE. Primary Objectives of Proposal Evaluations: a. To ensure impartial, equitable and comprehensive evaluation of proposals. b. To select the proposal that represents the best value to the Government by means of the Lowest Price Technically Acceptable source selection process. c. To ensure that all decisions are fully supportable from a technical and legal basis. d. Provide source selection evaluation participants with a clear understanding of their responsibilities and an overview of the evaluation process. e. Establish rational evaluation and rating procedures to ensure a thorough and accurate appraisal of all areas of each proposal. f. Ensure the source selection is performed impartially, equitably, comprehensively, efficiently, and free from outside influence. g. Protect the confidential and proprietary information contained in proposals, Government estimates and elsewhere. Price: Completed Bid Schedule( Last Page of RTA Package): TOTAL BID _________________________ CLIN(s) 0001 St.Stephen Powerhouse Bridge Crane Rehabilitation The contract award will be paid on a lump sum unit of issue. CLIN(s) 0002 Optional Bid Items _______________________________ Basis For Award Award will be made to that Offeror whose proposal is the lowest price technically acceptable that is determined to be fair and reasonable. Additional Proposal Items: 52.203-3 Gratuities (Apr 1984), 52.204-7 Central Contractor Registration, Completed 52.212-3 Offeror Representations and Certifications-Commercial Items (Aug 2009), 52.212-4 Contract Terms and Conditions-Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Fed 2010), 52.219-1 Small Business Program Representations (May 2004), 52.219-27 Notice of Total Service Disabled Veteran Owned Small Business Set-Aside (May 2004), 52.222-3 Convict Labor (June 2003), 52.222-21 Prohibition of Segregated Facilities (Feb 1999), 52.222-26 Equal Opportunity (Mar 2007), 52.225-1 Buy American Act-Supplies (June 2003), 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration (May 1999), 52.222-41 Service Contract Act of 1965 (Nov 2007), 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquistions of Commercial Items (Nov 2009), and 252.204-7004 Alt A Central Contractor Registration (Sep 2007). Statement of Work Scope of Work: 135 TON BRIDGE CRANE ELECTRICAL REHABILITATION- includes the removal of the bridge crane controls, motors, operator control station, and wiring on the St. Stephen bridge cranes, and the design, fabrication, factory testing and field testing, furnishing, and installation of electrical and control equipment and associated systems. The equipment and associated systems includes motors, limit switches, complete control systems including radio control, conduit, wiring, load cells and indication, and auxiliary devices required to replace and enhance the cranes' electrical power, and control systems. 1. GENERAL REQUIREMENTS: 1.1 In order to effectively and equitably evaluate all proposals, the Contracting Officer must receive sufficiently detailed information to allow review and evaluation by the Government. 1.2 Tabs. Organize and tab the proposal as shown below. 1.3 Written materials will be on 8-1/2" x 11" paper. 1.3.1 Include a detailed table of contents. If more than one binder is used, include the complete table of contents in each. Place any materials submitted but not required by this solicitation, such as company brochures or other information, in appendices following the tabbed sections. 1.4 Number of Copies. Submit original and three (3) hard copies of the proposal. 1.5 Electronic Copy of Submissions. In addition to the hard copies of the proposal, submit the Proposal on a CD ROM disk. The proposal should be in MS Word or Adobe Acrobat PDF file. The electronic version should either be a single file tabbed in the same order as the hard copy or multiple files hyperlinked to a single table of contents. 2. PRICE AND TECHNICAL PROPOSAL FORMAT REQUIREMENTS. Proposals shall be organized and tabbed as follows: TAB A - Bid Sheet. TAB B - Statement of Compliance- Appendix K TAB C- Proposal Data Sheet- Appendix A TAB D- Past Performance- Appendix B - Submit 3 to 5 projects for evaluation TAB E- Past Performance Questionnaires (Project References in the Past 3 Years- Minimum 3-submit the front portion of the sheet that was sent to references) - Appendix C TAB F- Corporate Relevance- Appendix D -(Ideally, these will be the same projects as submitted for Past Performance, Tab D, but not required.) Wage Determination General Decision Number: SC120029 10/19/2012 SC29 Superseded General Decision Number: SC20100056 State: South Carolina Construction Type: Building County: Berkeley County in South Carolina. BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories). Modification Number Publication Date 0 01/06/2012 1 04/20/2012 2 10/19/2012 ELEC0776-002 09/01/2011 Rates Fringes ELECTRICIAN...............................................$ 23.77 8.87 Work more than 40 ft. above the ground on or from swinging scaffolds, boson chairs, or raw structural steel: $1.00 per hour additional. ---------------------------------------------------------------- * IRON0848-006 02/01/2012 Rates Fringes IRONWORKER, STRUCTURAL..................$ 21.55 8.90 ---------------------------------------------------------------- * PLUM0421-005 07/01/2012 Rates Fringes PIPEFITTER....................................................$ 24.40 9.35 ---------------------------------------------------------------- SUSC2011-018 08/31/2011 Rates Fringes BRICKLAYER.................................................$ 18.00 0.00 CARPENTER (Drywall Hanging Only)..................................................................$ 16.32 1.50 CARPENTER (Form Work Only).....................$ 14.09 2.22 CARPENTER, Excludes Drywall Hanging, and Form Work...................................$ 16.25 1.36 CEMENT MASON/CONCRETE FINISHER...$ 14.77 0.00 HVAC MECHANIC (HVAC Duct Installation Only)................................................$ 19.24 2.69 LABORER: Common or General......................$ 11.10 1.72 LABORER: Landscape......................................$ 9.45 0.49 LABORER: Mason Tender-Brick/Concrete/Cement/S tone......................................................................$ 11.00 0.00 LABORER: Pipelayer........................................$ 14.69 2.08 OPERATOR: Backhoe/Excavator/Trackhoe.............................$ 19.62 3.54 OPERATOR: Bulldozer....................................$ 17.07 2.65 OPERATOR: Crane..........................................$ 19.39 2.02 OPERATOR: Grader/Blade..............................$ 17.59 1.56 OPERATOR: Loader........................................$ 14.18 1.99 PAINTER: Brush, Roller and Spray..................................................................$ 12.74 0.00 PLUMBER........................................................$ 18.95 5.35 ROOFER...........................................................$ 12.11 0.00 TRUCK DRIVER.............................................$ 14.21 3.24 ---------------------------------------------------------------- WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental. ================================================================ Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)). ---------------------------------------------------------------- The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union. Union Identifiers An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters, PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example. Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rate. 0000/9999: weighted union wage rates will be published annually each January. Non-Union Identifiers Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date. Survey wage rates will remain in effect and will not change until a new survey is conducted. ---------------------------------------------------------------- WAGE DETERMINATION APPEALS PROCESS 1.) Has there been an initial decision in the matter? This can be: * an existing published wage determination * a survey underlying a wage determination * a Wage and Hour Division letter setting forth a position on a wage determination matter * a conformance (additional classification and rate) ruling On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed. With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to: Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to: Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue. 3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to: Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 4.) All decisions by the Administrative Review Board are final. ================================================================ END OF GENERAL DECISION Proposal Delivery Information: All proposals shall be received in its entirety not later than 2:00pm EST on March 28, 2013 at the U.S. Army Corps of Engineers, Charleston District, Contracting Division, 69-A Hagood Avenue, Charleston, SC, 29403. Any questions or concerns regarding this solicitation shall be forwarded in writing to Contract Specialist, Marshall Burns at above address, or email at marshall.burns@usace.army.mil or phone 843-329-8194. If you are unable to reach Marshall Burns please contact Walter Gordon at 843-329-8082. The last date for questions and answers for this solicitation shall be Thursday, March 14th, 2013. A site visit at the St. Stephens Powerhouse (1275 REDIVERSION ROAD, ST. STEPHENS, SC 29479) is scheduled for 9:00 AM on 6 March 2013 and is highly encouraged. Contractors interested in participating in a site visit should contact JOESEPH MORAN AT 843-329-8045, OR JOESPH.E.MORAN@USACE.ARMY.MIL
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/886d087956708c038a13f07365fb55d7)
- Place of Performance
- Address: St. Stephen's Powerhouse, 1275 Rediversion Road, Saint Stephen, South Carolina, 29479, United States
- Zip Code: 29479
- Zip Code: 29479
- Record
- SN03016465-W 20130322/130320234515-886d087956708c038a13f07365fb55d7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |