FBODaily.com | FedBizOpps: PRESOL | 10 | LOCK, TRAVELING, CANN

FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 04, 2013 FBO #4149
SOLICITATION NOTICE

10 -- LOCK, TRAVELING, CANN

Notice Date: 4/2/2013
Notice Type: Presolicitation
NAICS: 332994 — Small Arms, Ordnance, and Ordnance Accessories Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
ZIP Code: 43218-3990
Solicitation Number: SPM7L413R0019
Archive Date: 6/1/2013
Point of Contact: CHRISTINA COMPSON, Phone: 6146929934
E-Mail Address: christina.compson@dla.mil
(christina.compson@dla.mil)
Small Business Set-Aside: Total Small Business
Description: Description: NSN 1015-01-340-7781- LOCK, TRAVELING,CANN The required quantity is 82 each to be shipped to (W25G1U) New Cumberland, PA 17070-5001. FOB destination and inspection at origin is required. This solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of 04/17/13 with a closing date of 5/17/13. Hard copies of this solicitation are not available. This solicitation is set-aside for small business. The required delivery is 150 days. All offers shall be in the English language and in US dollars. All interested suppliers may submit an offer. NOTICE: THIS SOLICITATION CONTAINS DLAD PROVISION 52.512-9023 FOR REVERSE AUCTION (RA). THE GOVERNMENT RESERVES THE RIGHT TO ACTIVATE THIS PROVISION AFTER TIMELY OFFERS HAVE BEEN RECEIVED AND EVALUATED.'THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS. EVALUATION FACTOR FOR PREAWARD SURVEY (52.215-9001) APPLIES TO THIS SOLICITATION. Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date. Proposed procurement contains a 100% option for increased quantities. Restricted Rights Data Restrictions apply. ____________________________________ ITEM DESCRIPTION FOR PR: 0047738188 LOCK,TRAVELING,CANN DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS SOLICITATION, THEREFORE SURPLUS MATERIAL WILL NOT BE CONSIDERED. IF PRESENT IN THE SOLICITATION, PROVISION 52.211-9003 AND CLAUSE 52.211-9000 ARE NOT APPLICABLE. _______________EXCEPTION DATA___________________ DOCUMENT 12591219: DELETE MS12592204 AND REPLACE WITH 12592204. ______________END OF EXCEPTIONS_________________ THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD. THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS. PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION.,, PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD 52.246-9004 MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS CONTRACT. FIVE (5) PVT SAMPLES, UNLESS OTHERWISE SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT IN FOR TESTING.,, THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9001:2008 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9001:2008 PARAGRAPHS APPLIES: 4.2.4: Control of documents for inspection and testing as well as applicable drawings specifications and instructions required by the contract 7.4.2.a: Purchasing of material and requirements for approval of product 7.5.4: Customer property (customer supplied product or material) 7.5.3: Product Identification and Traceability 7.5.1 and 8.2.4: Control of production and service provisions / Monitoring and measurement of product 7.6: Control of monitoring and measuring equipment 7.5.1, 7.5.3, and 8.2.4: Control, identify and monitor product, product documentation and inspection activities status 8.3: Control of non-conforming product 8.5.2 and 8.5.3: Corrective and preventative actions 4.2.4: Control of records FAR CLAUSE 52.246-11 APPLIES ROYAL ORDNANCE LICENSE AGREEMENT APPLIES. PROPERLY EXECUTED NON-USE-DISCLOSURE AGREEMENT REQUIRED BEFORE BIDSET WILL BE DISSEMINATED. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT, APPLIES.,, THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil "CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT." CRITICAL APPLICATION ITEM I/A/W DRAWING NR 19200 12591187 REFNO AMEND NR C DTD 09/17/02 TYPE NUMBER I/A/W DRAWING NR 19200 12591219 REFNO AMEND NR DTD 09/13/12 TYPE NUMBER I/A/W DRAWING NR 19200 12591219 BASIC AMEND NR A DTD 05/24/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591219 REFNO AMEND NR B DTD 05/09/07 TYPE NUMBER I/A/W DRAWING NR 19200 12591219 REFNO AMEND NR A DTD 05/24/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591271 REFNO AMEND NR H DTD 04/12/11 TYPE NUMBER I/A/W DRAWING NR 19200 12591291 REFNO AMEND NR C DTD 08/15/11 TYPE NUMBER I/A/W DRAWING NR 19200 12591292 REFNO AMEND NR C DTD 07/19/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591362 REFNO AMEND NR D DTD 08/15/11 TYPE NUMBER I/A/W DRAWING NR 19200 12591363 REFNO AMEND NR A DTD 04/25/06 TYPE NUMBER I/A/W QAP 19200 12591363 REFNO AMEND NR A DTD 04/17/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591390 REFNO AMEND NR D DTD 05/24/06 TYPE NUMBER I/A/W QAP 19200 12591390 REFNO AMEND NR B DTD 05/24/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591391 REFNO AMEND NR D DTD 05/24/06 TYPE NUMBER I/A/W QAP 19200 12591391 REFNO AMEND NR B DTD 05/24/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591392 REFNO AMEND NR A DTD 10/05/10 TYPE NUMBER I/A/W QAP 19200 12591392 REFNO AMEND NR A DTD 09/07/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591409 REFNO AMEND NR D DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591410 REFNO AMEND NR D DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591411 REFNO AMEND NR D DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591412 REFNO AMEND NR D DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591413 REFNO AMEND NR D DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19200 12591414 REFNO AMEND NR A DTD 01/15/98 TYPE NUMBER I/A/W DRAWING NR 19200 12591415 REFNO AMEND NR A DTD 01/15/98 TYPE NUMBER I/A/W DRAWING NR 19200 12591416 REFNO AMEND NR C DTD 01/15/98 TYPE NUMBER I/A/W DRAWING NR 19200 12591595 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12591616 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592204 REFNO AMEND NR B DTD 12/27/05 TYPE NUMBER I/A/W QAP 19200 12592204 REFNO AMEND NR A DTD 12/15/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592205 REFNO AMEND NR A DTD 02/02/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592206 REFNO AMEND NR A DTD 01/25/06 TYPE NUMBER I/A/W QAP 19200 12592206 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592207 REFNO AMEND NR B DTD 03/20/07 TYPE NUMBER I/A/W QAP 19200 12592207 REFNO AMEND NR DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592208 REFNO AMEND NR A DTD 12/27/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592209 REFNO AMEND NR B DTD 02/02/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592209 REFNO AMEND NR B DTD 01/23/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592210 REFNO AMEND NR B DTD 01/25/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592212 REFNO AMEND NR A DTD 01/25/06 TYPE NUMBER I/A/W QAP 19200 12592212 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592213 REFNO AMEND NR B DTD 01/25/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592214 REFNO AMEND NR B DTD 12/27/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592215 REFNO AMEND NR C DTD 03/20/07 TYPE NUMBER I/A/W DRAWING NR 19200 12592216 REFNO AMEND NR A DTD 02/22/06 TYPE NUMBER I/A/W QAP 19200 12592216 REFNO AMEND NR A DTD 02/15/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592217 REFNO AMEND NR B DTD 12/27/05 TYPE NUMBER I/A/W QAP 19200 12592217 REFNO AMEND NR B DTD 12/15/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592218 REFNO AMEND NR A DTD 01/25/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592218 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592219 REFNO AMEND NR A DTD 01/25/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592220 REFNO AMEND NR A DTD 01/25/06 TYPE NUMBER I/A/W QAP 19200 12592220 REFNO AMEND NR A DTD 01/12/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592221 REFNO AMEND NR D DTD 03/20/07 TYPE NUMBER I/A/W QAP 19200 12592221 REFNO AMEND NR DTD 11/22/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592222 REFNO AMEND NR B DTD 03/01/06 TYPE NUMBER I/A/W QAP 19200 12592222 REFNO AMEND NR B DTD 02/16/06 TYPE NUMBER I/A/W DRAWING NR 19200 12592223 REFNO AMEND NR B DTD 12/05/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592224 REFNO AMEND NR B DTD 11/21/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592225 REFNO AMEND NR A DTD 12/05/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592226 REFNO AMEND NR A DTD 12/05/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592229 REFNO AMEND NR C DTD 03/20/07 TYPE NUMBER I/A/W QAP 19200 12592229 REFNO AMEND NR DTD 11/22/05 TYPE NUMBER I/A/W DRAWING NR 19200 12592230 REFNO AMEND NR A DTD 12/05/05 TYPE NUMBER I/A/W DRAWING NR 19200 12593049 REFNO AMEND NR B DTD 05/31/11 TYPE NUMBER I/A/W DRAWING NR 19200 12593051 REFNO AMEND NR C DTD 08/06/10 TYPE NUMBER I/A/W DRAWING NR 19200 12593053 REFNO AMEND NR D DTD 05/31/11 TYPE NUMBER I/A/W DRAWING NR 19200 12593070 REFNO AMEND NR A DTD 02/06/08 TYPE NUMBER I/A/W DRAWING NR 19200 12593228 REFNO AMEND NR A DTD 02/06/08 TYPE NUMBER I/A/W DRAWING NR 19200 12593260 REFNO AMEND NR B DTD 01/19/11 TYPE NUMBER I/A/W DRAWING NR 19200 13016031 REFNO AMEND NR A DTD 09/02/09 TYPE NUMBER I/A/W DRAWING NR 19200 13016032 REFNO AMEND NR A DTD 09/02/09 TYPE NUMBER I/A/W DRAWING NR 19200 13016033 REFNO AMEND NR A DTD 09/02/09 TYPE NUMBER I/A/W DRAWING NR 19200 13016044 REFNO AMEND NR DTD 09/17/10 TYPE NUMBER I/A/W DRAWING NR 19207 12579607 REFNO AMEND NR C DTD 08/04/09 TYPE NUMBER I/A/W SPEC NR QPL-3150-34 NOT 1 REFNO AMEND NR 34 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-46010-18 NOT 1 REFNO AMEND NR 18 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53022-14 NOT 1 REFNO AMEND NR 14 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53030-7 NOT 1 REFNO AMEND NR 7 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-53039-22 NOT 1 REFNO AMEND NR 22 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-64159-13 NOT 1 REFNO AMEND NR 1 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-81733-10(1) NOT 1 REFNO AMEND NR 1 DTD 10/03/06 TYPE NUMBER
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L413R0019/listing.html)
Record: SN03026354-W 20130404/130402234850-22d505edda806cd2d852dba01a0e925c (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

10 -- LOCK, TRAVELING, CANN