MODIFICATION
52 -- MISC TOOLS
- Notice Date
- 4/10/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- 1 Overcash Ave Building 2S, Chambersburg, PA 17201
- ZIP Code
- 17201
- Solicitation Number
- W911N2-13-T-0040
- Response Due
- 3/11/2013
- Archive Date
- 9/7/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911N2-13-T-0040 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-65. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-03-11 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Chambersburg, PA 17201 The RSA - Letterkenny Army Depot requires the following items, Brand Name or Equal, to the following: LI 001: PLUG GAUGE HANDTOOL; P/N: 525446-7 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.040? X.187? No Go Size:.060? X.187?, 2, EA; LI 002: DIE SET, METAL STAMP; NSN: 5110-01-361-3409 Type: Number, 0 to 8 Style: Gothic, 3/32? Character Height, 6, EA; LI 003: SOCKET, BIT SCREWDRIVER 1/4 DR# 1; P/N: 44481 Mfr: SK HAND TOOL Drive Size: ?? Bit Size: #1 Bit Style: Phillips Finish: Chrome, 10, EA; LI 004: PLUG GAUGE HANDTOOL; P/N: 525442-9 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.169? No Go Size:.175?, 2, EA; LI 005: PLUG GAUGE, HANDTOOL; P/N: 525442-7 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.109? No Go Size:.115?, 2, EA; LI 006: COBALT DRILL BITS 1/2IN; P/N: 410635 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 1/2? Shank: Round with 3 flats Package Quantity: 6, 2, EA; LI 007: COBALT DRILL BITS 3/8IN; P/N: 410626 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 3/8? Shank: Round with 3 flats Package Quantity: 6, 7, EA; LI 008: COBALT DRILL BITS 17/64"; P/N: 410619 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 17/64? Shank: Round with 3 flats Package Quantity: 6, 84, EA; LI 009: COBALT DRILL BITS 1/4IN; P/N: 410618 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: ?? Shank: Round with 3 flats Package Quantity: 12, 8, EA; LI 010: COBALT 3/16" DRILL BITS; P/N: 410614 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 3/16? Shank: Round with 3 flats Package Quantity: 12, 168, EA; LI 011: COBALT DRILL BIT 11/64"; P/N: 410613 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 11/64? Shank: Round with 3 flats Package Quantity: 12, 96, EA; LI 012: COBALT 1/8" DRILL BIT; P/N: 410610 Mfr: Hilti Inc Material: High Speed Steel, Cobalt Type:Jobber Size: 1/8? Shank: Round with 3 flats Package Quantity: 12, 192, EA; LI 013: SPRAYER, AIR ATOMIZING, 32 OZ. CAP; P/N: 7700 Mfr: Milwaukee Sprayer Mfr. Co. Material: Brass Capacity: 1 Quart Nozzle Material: Brass Maximum Pressure: 200 P.S.I. Finish: Chrome, 10, EA; LI 014: RIVETER, BLIND, PNEUMATIC; NSN: 5130-00-295-6088 Mfr: Avdel Corp Mfr Part Number: 734 Maximum Rivet Diameter Accommodated:.188? Head Characteristics: 1/8, 5/32, 3/16 IN Diameter Universal and Countersunk Style, 30, EA; LI 015: 5 TON 3 HOOK COME-ALONG; P/N: 02256A Manufacturer: Neiko Tools Capacity: 5 Ton Cable Material: Galvanized Steel Cable Size: 3/16? Diameter 12 FT Long Pulley Type: Ratchet Hook Type: 1? Open Safety Latch Hook Quantity: 3 Each, 1, EA; LI 016: WRENCH, OIL FILTER, LARGE; P/N: 70-609 Mfr: Plews and Edelmann Specifications:Fits 4 ?? to 5 1/8? Filters Standard Handle, 10, EA; LI 017: GUIDE, ROUTER; P/N: 14-2240 Mfr: Cooper Power Tools Specifications: For Router Bits with 3/8? Shanks Overall Diameter: 2-1/2? Guide Diameter: ?? Guide Length: 3/8? Threaded Shaft: 5/8-18 NF, 4, EA; LI 018: HOLE SAW, 11/16" DIA, 1-3/4" DEPTH, BI-METAL; P/N: 41005A13 Mfr: DeWalt Mfr Part Number: D180011 Material: Bi-Metal Diameter: 11/16? Cutting Depth: 1-3/4? Drill Size: 3/16, 8, EA; LI 019: SCRAPER, WIDE BLADE, 4"; P/N: 7106A12 Mfr: Unger Mfr. Part Number: SH25C Handle Material: Aluminum with Nylon Grip Overall Length: 12? Blade Material: Carbon Steel Blade Width: 4?, 18, EA; LI 020: PUNCH SET, TRANSFER; NSN: 5120-00-550-3463 General Description: Contains 28 Punches, Size 3/32 to ? IN by 64ths; Plus 17/32 IN Size 4-7/8 IN Overall Lengths; Furnished with Indexed Stand, 12, EA; LI 021: PLUG GAUGE HANDTOOL; P/N: 525446-8 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.030? X.120? No Go Size:.050? X.120, 2, EA; LI 022: COUNTER SINK, SINGLE FLUTE, 1" X 100?; P/N: 00491 Mfr: Severance Tool Body Diameter: 1? Nose Type: Point Shank Diameter: ?? Overall Length: 2-13/16? Shank Length: 1-5/16? Angle: 100?, 10, EA; LI 023: COUNTERSINK, SINGLE FLUTE, 1" X 90?; P/N: 00471 Mfr: Severance Tool Body Diameter: 1? Nose Type: Point Shank Diameter: ?? Overall Length: 2-13/16? Shank Length: 1-5/16? Angle: 90?, 8, EA; LI 024: THERMOMETER, INFRARED, ENHANCED; P/N: RTEMP60PBA Mfr: IDSC Holdings, LLC Temperature Range: -32? to 600?C (-25? to 1100?F) Temperature Display:.2?C (.5?F) Accuracy: +/- 1% Ambient Operating Range: 0? 50?C (32? to 120?F) Repeatability:+/- 5% of Reading Emissivity:.1 to 1 Digitally Adjustable Response Time: 500 mSec Distance to Spot Ratio: 30:1, 6, EA; LI 025: SAW BLADE WELDED QXP 17 11 X 1-1/2; P/N: 1778870 Mfr: AMERICAN SAW AND MFG CO Material: Bimetal Blade Length: 215? Blade Width: 1-1/2? Blade Thickness:.050? Pitch Type: Variable Teeth Per Inch: 2-3, 12, EA; LI 026: GAUGE SET, 410A MANIFOLD W/410 GAUGES; P/N: 49865 Mfr: Ritchie Engineering Co., Inc Description: 2-Valve Manifold with sight glass, 3-1/8? (80 mm) Diameter Gauges, 1% Accuracy, Steel Case, ?F Gauges, 4, EA; LI 027: STOCK BENDER, COMPACT; P/N: 38470 Mfr: Central Machinery Dimensions: 10-1/8? W X 39-3/4? H X 35-3/4? L Material:.325? Steel Mounting Holes: ?? (4) Max Width of Stock: 1-15/16? Max Stock Thickness: 5/16? Max Bar Stock Diameter: 5/8? Die Sizes: 1?, 1-1/4?, 1-1/2?, 1-3/4?, 2?, 2-1/2?, 3?, 1, EA; LI 028: TAP TAPER M20X1.5 4FL; P/N: 020429AS-NYT Mfr: Regal Cutting Tools Mfr Part Number: 020429AS Type: General Purpose Size: M20 X 1.5 Pitch: 1.5 Flutes: 4 each Limit: D3 Chamfer: Taper Finish: Bright, 30, EA; LI 029: STRIPPER WIRE 22-30 AWG; P/N: T307 Mfr: Ameritool Inc Wire Size Cutting Capability: 22 to 30 AWG Action Type: Coil Spring Handle: Vinyl Grip, 50, EA; LI 030: SLING NYLON 2 IN X 10 FT EYE TO EYE; P/N: EE2-92-2X10 Mfr: Liftex Corp Material: Nylon Length: 10 FT Width: 2? Number of Plys:2 End Type:Eye to Eye Color: Yellow, 60, EA; LI 031: BLADES SAW 10IN X 52 TOOTH; P/N: 0256846 Mfr: Evolution Power Tools Mfr Part Number: 10BLADEST Type: Circular Application: Steel Number of Teeth: 52 Arbor Size: 1? Kerf:.078? Tip Material: Carbide Blade Diameter:10? Operating Speed: 5200 RPM, 3, EA; LI 032: CRIMPING STRIPPING CUTTING TOOL; P/N: 91523-1 Mfr: TYCO ELECTRONICS CORPORATION Specifications: Hand Crimp tool for use with Tyco Type III+, VI Series Pin and Socket contacts. Crimp Sizes 24 ? 16 AWG, 6, EA; LI 033: KIT, TOOL, CONTACT EXTRACTION; P/N: 7867K42 Mfr: Jonard Mfr Part Number: KR-260 Kits Contains: Extraction Tool, P/N: R-4601 for contact size 20 (.040?) Extraction Tool, P/N: R-4602 for contact size 16 (.063?) Extraction Tool, P/N: R-9461 for contact size 12 (.093?), 2, EA; LI 034: WRENCH, TAP AND REAM; NSN: 5120-00-277-4065 Overall Length: 15? Minimum and 21? Maximum Tap Size Range:.5? to 1? Material: Steel Handle: Straight, 10, EA; LI 035: INSTALLER/ REMOVAL MACHINE, BRAKE DRUM; P/N: 350B Mfr: Tire Service Equipment Mfg. Co., Inc Specifications: 27.5" long x 27" wide x 48" high Hub and Drum Tool that rolls under and bolts on to heavy brake drum and hub assemblies, then rolls the assembly out and lays it over for servicing., 2, EA; LI 036: BIT, INSERT HEXHEAD 1/8, 1" L, 1/4"; P/N: 3053013 Mfr: Irwin Industrial Tool Co. Shank Size: ?? Tip Size: 1/8? Overall Length: 1?, 24, EA; LI 037: SOCKET, DEEP WELL, 3/4DR X 3/4IN 3.75 LONG; P/N: 01X120027 Type: 6 Point Surface Hex Drive Size: ?? Hex Size:?? Style: Deep Well Overall length: 3.75?, 8, EA; LI 038: POWER BLEEDER 3-TAB GM/FORD W/6FT TUBING; P/N: 01X120046 Mfr:Motive Products Mfr Part Number: 0118 Description: Made from custom machined aluminum. Includes 6 feet of high grade polyurethane tubing. Custom cap fits most late model GM cars and trucks. Also fits 2005 + Ford Mustangs. Two thickness gaskets included. Adapter 1118 included., 4, EA; LI 039: PLUG GAUGE HANDTOOL; P/N: 525442-8 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.119? No Go Size:.125?, 2, EA; LI 040: SEAT, MECHANICS, ADJUSTABLE, ROLLING; P/N: 51828 Mfr: Craftsman ?Padded Seat ?Adjustment Height: 16? to 21? ?Heavy Duty Steel Base w/Removable trays ?3? Ball Bearing Casters, 5, EA; LI 041: DENTAL CARVER; NSN: 6520-00-935-7254 Overall Length: 6.375? Minimum and 6.625? Maximum Blade Shape: Disk Pattern Style: 89-92 Material: Steel Finish: Mirror Specifications: Type I, Class B, Style 4, 60, EA; LI 042: CROWFOOT ATTACHMENT; NSN: 5120-00-541-4071 Overall Width: 1.75? Head Thickness:.375? Wrenching Size:.875? Drive Size:.375? Wrenching Shape: Oval Drive Shape: Square Material: Steel Finish: Chromium Style: Open End Camber, 24, EA; LI 043: WRENCH, TAP AND REAM; NSN: 5120-01-437-2171 Tap Size Range: +.060 to +.25 inches Features: Ratcheting, Knurled Nut, For Machine Screw size 0 to ?? Handle: Sliding ?T?, 24, EA; LI 044: BIT WIRE WRAP, 28 AWG; P/N: 758WI122 Mfr: Techni-Tool Specifications: Wire Wrap bit, Modified Wrap, 28 AWG, 8, EA; LI 045: JAW CAP, VISE 5" BRASS; P/N: VC5 Mfr: Reed Manufacturing Co. Mfr Part Number: 01580 Material: Brass Jaw Width: 5? (127 mm), 4, EA; LI 046: STEERING WHEEL PULLER SET; P/N: SWP80 Mfr: Mac Tools Description:Puller Set with 5 pair of Cap Screws to removes steering wheels on most domestic or imported vehicles, 2, EA; LI 047: PLIERS, RCP 8IN 1/4 -1-5/8; P/N: RCP8 Mfr: Jensen Tools Mfr Part Number: 78-008 Overall Length: 8? Jaw Capacity:?? to 1-5/8?, 2, EA; LI 048: 3/32" STAINLESS STEEL SHANK BALL DIE SET; P/N: BS-3-2 Mfr: Promec Material: Stainless Steel Fitting Type: Ball, Single Shank General: Two Die per Set Cable Diameter: 3/32? Die Length:2? Die Width: 2? Die Height: 1.760?, 1, EA; LI 049: PLUG GAUGE HANDTOOL; P/N: 525446-9 Mfr: Tyco Electronics Corp. Specifications: Go, No-Go Gauge Go Size:.064? X.171? No Go Size:.084? X.171?, 2, EA; LI 050: SC-3/5 CARBIDE STENCIL BLADE 60 DEG; P/N: ST-7900008 Mfr: Hitt Marking Devices Material: Carbide Steel Blade Angle:60?, 15, EA; LI 051: CREEPER, THE BONE, PLASTIC; P/N: BON-6031 Mfr: Whiteside MFG Co, Inc Mfr. Part Number: 6031 Length: 47? Width: 25.5? Height: 6.25? Ground Clearance: 1.75? Casters: 4 EA, 5.125? Diameter, 1? wide Thermoplastic Elastomer (TPE) casters Capacity: 300 LBS, 2, EA; LI 052: GAUGE, WELD AUTOMATIC WELD SIZE CAT # 6; P/N: 6 Mfr: G.A.L. Gage Company Specifications: For accurate Calibration of Butt Fillet Type Welds Checks Reinforcement and Throats of Fillet Welds Determines the Leg Size of Fillet Welds, 6, EA; LI 053: 5/16 LETTER STAMP SET; P/N: YOU5/16LS Mfr: Young Brothers, Inc Stamp Material: Steel Character Size: 5/16? Characters: A to Z, Capital Letters, 6, EA; LI 054: LOCTITE 985245 200/400MLL METAL DISPENSOR; P/N: 079340-985245 Mfr: Loctite Mfr Part Number: 985245 Specifications: Metal, hand held, manually operated dispensing gun for use with two-component adhesives packaged in 200 ml and 400 ml dual cartridges. Shall be capable of handling cartridges with 1:1, 2:1, 4:1, and 10:1 mix ratios., 2, EA; LI 055: LOCTITE 985662 9.3MM SNP TP MX NZL 10 PK; P/N: 079340-98469 Mfr: Loctite Mfr Part Number: 985662 Nozzle type: 200/400 ml Snap Tip Diameter: 9.3 ml Overall Length: 9.3? Element Quantity:24 Mix Ratio: 1:1, 2:1, 50, EA; LI 056: TOOL INSTALLATION PUSH NUT 1/4IN; P/N: 93633A040 Type: Push on retainer tool Screw Size: ?? Overall Length: 4? Depth:3? Outside Diameter:.5630?, 8, EA; LI 057: GAGE, SINGLE WELD "V-WAC" CAT # 5; P/N: 5 Mfr: G.A.L. Gage Company Specifications: Undercuts/Pits to ??, Crowns to ?? by 1/64? Increments Checks: Undercut, Crown Heights, Porosity and Pits Material: Stainless Steel, 9, EA; LI 058: BAND SAW BLADE CLASSIC PRO 18.S X 1 1/2; P/N: 1793025 Mfr: AMERICAN SAW AND MFG CO Material: Bimetal Blade Length: 218? Blade Width: 1-1/2? Blade Thickness:.050? Pitch Type: Variable Teeth Per Inch: 5-8, 18, EA; LI 059: TOOL KIT, RIVET, ELECTRIC, CORDLESS; P/N: MCS5800 Mfr: Emhart Teknologies Work Capacity: Sets Blind Rivets up to 5mm (3/16?) DIA, All materials Power Type: Battery Battery Endurance: 1900 Rivets, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, RSA - Letterkenny Army Depot intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. RSA - Letterkenny Army Depot is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5(dev), Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b):52.204-99, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-13, 52.225-18, 52.232-33, 52.232-99(dev), 52.233-3, 52.233-4, 52.247-34, 52.252-1, 52.252-2, 52.252-5, 52.252-6, 252.204-7003, 252.212-7001(dev), 252.232-7003, 252.232-7006, 252.232-7010, 252.243-7001,, L2, L17, L21 The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. 52.212-5(dev), 52.219-28, 52.225-18, 52.232-99(dev), 52.252-1, 52.252-2, 52.252-5, 52.252-6, 252.212-7001(dev), 252.232-7006, L2, L17, L21 252.232-7006 (a) Definitions. As used in this clause--Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System For Award Management (SAM) at https://www.sam.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the ``Web Based Training'' link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). COMBO (Combination Invoice and Receiving Report). This eliminates the need to separately process a receiving report and invoice. (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. DESTINATION (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Field Name in WAWFData to be entered in WAWF Pay Official DoDAACHQ0303 Issue By DoDAAC W911N2 Admin DoDAAC W911N2 Inspect By DoDAACW25G1Q Acceptor DoDAAC W25G1Q (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the ``Send Additional Email Notifications'' field of WAWF once a document is submitted in the system. John Kauffman Jr ? Contract Specialistjohn.r.kauffman10.civ@mail.mil David Hershey ? Quality Assurancedavid.c.hershey.civ@mail.mil Mark Furry ? Quality Assurancemark.e.furry.civ@mail.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/f950e884155ad72ae2b49c334b97d70e)
- Place of Performance
- Address: Chambersburg, PA 17201
- Zip Code: 17201
- Zip Code: 17201
- Record
- SN03033255-W 20130412/130410234613-f950e884155ad72ae2b49c334b97d70e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |