MODIFICATION
65 -- Spectralis Tracking OCT SYstem
- Notice Date
- 4/15/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- 215 North Main Street, White River Junction, VT 05009
- ZIP Code
- 05009
- Solicitation Number
- VA241-13-Q-0426
- Response Due
- 3/15/2013
- Archive Date
- 9/11/2013
- Point of Contact
- Name: Patricia Newberry, Title: Purchasing Agent, Phone: 8022959363, Fax: 8022965103
- E-Mail Address
-
patricia.newberry@va.gov;
- Small Business Set-Aside
- N/A
- Description
- CANCELLATION NOTICE:Bids are being solicited under solicitation number VA241-13-Q-0426. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 460386_01. VA Federal Supply Schedule (VA FSS) Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing VA FSS contract. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective VA FSS contract AND upon approval from the soliciting Contracting Officer. Information regarding VA FSS contracts can be found at www.fss.va.gov. This requirement is unrestricted and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-03-15 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Jamaica Plain, MA 02130 The VHA NCO 01 - 405 - White River Jct, VT requires the following items, Exact Match Only, to the following: LI 001: SPECTRALIS TRACKING OCT SYSTEM-OCT PLUS (3MODE) W/BLUEPEAK 0226-SPOCT-BPP, 1, EA; LI 002: SPECTRALIS SCANNING LASER CAMERA -OCT PLUS W/BLUE PEAK 0226-220, 1, EA; LI 003: COMPUTER - SPECTRALIS HP Z400 - 5.3a 0231-111, 1, EA; LI 004: ISOLATION TRANSFORMER 0238-077, 1, EA; LI 005: HARD DRIVE - SPECTRALIS EXTERNAL RAID HARD DRIVE 0238-255, 1, EA; LI 006: MONITOR NEC 24" LCD EA241 0235-108, 1, EA; LI 007: PRINTER - OFFICEJET PRO 8000 0236-133, 1, EA; LI 008: SPECTRALIS CUSTOM LIFT TABLE 0247-SPEC, 1, EA; LI 009: HEYEX NETWORK LICENSE (INCLUDED WITH SYSTEM) 0238-281, 2, EA; LI 010: 1 YEAR WARRANTY, INCLUDES INSTALLATION & TRAINING 0998-OCT+BP, 1, EA; LI 011: SPECTRALIS SOFTWARE VER 5.3a - FULL VERSION 0226-925, 1, EA; LI 012: HEIDELBERG EDGE PERIMETER SYSTEM 0224-HEP, 1, EA; LI 013: HEP - HEIDELBERG EDGE PERIMETER 0224-100, 1, EA; LI 014: PRINTER - HP DESKJET 6940 - HEP 0236-135, 1, EA; LI 015: HEYEX NETWORK LICENSE (INCLUDED WITH SYSTEM) 0238-281, 1, EA; LI 016: 1 YR WARRANTY - INCLUDES INSTALLATION & TRAINING 0998-HEP, 1, EA; LI 017: ISOLATION TRANSFORMER ADAPTOR - HEP 0224-013, 2, EA; LI 018: ISOLATION TRANSFORMER - HEP 0238-279, 1, EA; LI 019: HEP - KEYBOARD/MOUSE COMBO 0224-012, 1, EA; LI 020: TABLE-TOP-HEP - 32"w X 23"d 0237-242, 1, EA; LI 021: TABLE - BASE - HEP 0237-240, 1, EA; LI 022: BRACKET, TRANSFORMER, HEP 0224-014, 1, EA; LI 023: SPECTRALIS NSITE AXONAL ANALYTICS SOFTWARE NST-0226-900, 5, EA; LI 024: WIDE FIELD OBJECTIVE - 55 DEGREE 0238-152, 5, EA; LI 025: STAURENGHI WIDE FIELD LENS 0238-165, 2, EA; LI 026: SPECTRALIS TRACKING OCT SYSTEM -HRA+OCT (6 MODE) 0226-HRAOCT, 1, EA; LI 027: SPECTRALIS SCANNING LASER CAMERA HRA+OCT 0226-000, 1, EA; LI 028: 28 COMPUTER - SPECTRALIS HP Z400-5.3A 0231-111, 1, EA; LI 029: MONITOR NEC 24" LCD EA241 0235-108, 1, EA; LI 030: PRINTER - OFFICEJET PRO 8000 0236-133, 1, EA; LI 031: ISOLATION TRANSFORMER, 1, EA; LI 032: HEYEX NETWORK LICENSE (INCLUDED WITH SYSTEM), 1, EA; LI 033: HARD DRIVE - SPECTRALIS EXTERNAL RAID HARD DRIVE 0238-255, 1, EA; LI 034: SPECTRALIS CUSTOME LIFT TABLE 0237-SPEC, 1, EA; LI 035: YEAR WARRANTY, INCLUDES INSTALLATION & TRAINING 0998-HRAOCT, 1, EA; LI 036: SPECTRALIS SOFTWARE VER 5.3a - FULL VERSION 0226-925, 1, EA; LI 037: **NOTE** TRADE IN DISCOUNT-SPECTRALIS OCT PLUS $40,000 - TRADE IN DISCOUNT IS IN CONJUNCTION WITH SPECTRALIS SYSTEM BEING IN GOOD WORKING CONDITION, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, VHA NCO 01 - 405 - White River Jct, VT intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. VHA NCO 01 - 405 - White River Jct, VT is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to any VHA buy terms entered in FedBid, the Seller (Bidder) has reviewed and acknowledges any attached solicitation documents, item details, delivery schedule, and/or instructions to Seller (collectively referred to as requirements), and agrees to all terms and conditions set forth in the solicitation documents. While additional support documentation (e.g. Seller Attachments) may be requested, pricing shall be entered as a 'bid' in the reverse auction - offline pricing is not an acceptable bid. At the conclusion of the reverse auction, if attached to the buy, the apparent winning bidder shall be required to complete the solicitation documents prior to award. The bidder or offeror agrees that if a contract is awarded to him/her, as a result of this solicitation, he/she will not advertise the award of the contract in his/her commercial advertising in such a manner as to state or imply that the Department of Veterans Affairs endorses a product, project or commercial line of endeavor. (a) The successful bidder will supply operation/maintenance (service data) manuals with each piece of equipment in the quantity specified in the solicitation and resulting purchase order. As a minimum, the manual(s) shall be bound and equivalent to the manual(s) provided the manufacturer's designated field service representative as well as comply with all the requirements in paragraphs (b) through (i) of this clause. Sections, headings and section sequence identified in (b) through (i) of this clause are typical and may vary between manufacturers. Variances in the sections, headings and section sequence, however, do not relieve the manufacturer of his/her responsibility in supplying the technical data called for therein. (b) Title Page and Front Matter. The title page shall include the equipment nomenclature, model number, effective date of the manual and the manufacturer's name and address. If the manual applies to a particular version of the equipment only, the title page shall also list that equipment's serial number. Front matter shall consist of the Table of Contents, List of Tables, List of Illustrations and a frontispiece (photograph or line drawing) depicting the equipment. (c) Section I, General Description. This section shall provide a generalized description of the equipment or devices and shall describe its purpose or intended use. Included in this section will be a table listing all pertinent equipment specifications, power requirements, environmental limitations and physical dimensions. (d) Section II, Installation. Section II shall provide pertinent installation information. It shall list all input and output connectors using applicable reference designators and functional names as they appear on the equipment. Included in this listing will be a brief description of the function of each connector along with the connector type. Instructions shall be provided as to the recommended method of repacking the equipment for shipment (packing material, labeling, etc.). (e) Section III, Operation. Section III will fully describe the operation of the equipment and shall include a listing of each control with a brief description of its function and step-by-step procedures for each operating mode. Procedures will use the control(s) nomenclature as it appears on the equipment and will be keyed to one or more illustrations of the equipment. Operating procedures will include any preoperational checks, calibration adjustments and operation tests. Notes, cautions and warnings shall be set off from the text body so they may easily be recognizable and will draw the attention of the reader. Illustrations should be used wherever possible depicting equipment connections for test, calibration, patient monitoring and measurements. For large, complex and/or highly versatile equipment capable of many operating modes and in other instances where the Operation Section is quite large, operational information may be bound separately in the form of an Operators Manual. The providing of a separate Operators manual does not relieve the supplier of his responsibility for providing the minimum acceptable maintenance data specified herein. When applicable, flow charts and narrative descriptions of software shall be provided. If programming is either built-in and/or user modifiable, a complete software listing shall be supplied. Equipment items with software packages shall also include diagnostic routines and sample outputs. Submission information shall be given in the Maintenance Section to identify equipment malfunctions that are software related. (f) Section IV, Principles of Operation. This section shall describe in narrative form the principles of operation of the equipment. Circuitry shall be discussed in sufficient detail to be understood by technicians and engineers who possess a working knowledge of electronics and a general familiarity with the overall application of the devices. The circuit descriptions should start at the overall equipment level and proceed to more detailed circuit descriptions. The overall description shall be keyed to a functional block diagram of the equipment. Circuit descriptions shall be keyed to schematic diagrams discussed in paragraph (i) below. It is recommended that for complex or special circuits, simplified schematics should be included in this section. (g) Section V, Maintenance. The maintenance section shall contain a list of recommended test equipment, special tools, preventive maintenance instructions and corrective information. The list of test equipment shall be that recommended by the manufacturer and shall be designated by manufacturer and model number. Special tools are those items not commercially available or those that are designed specifically for the equipment being supplied. Sufficient data will be provided to enable their purchase by the Department of Veterans Affairs. Preventive maintenance instructions shall consist of those recommended by the manufacturer to preclude unnecessary failures. Procedures and the recommended frequency of performance shall be included for visual inspection, cleaning, lubricating, mechanical adjustments and circuit calibration. Corrective maintenance shall consist of the data necessary to troubleshoot and rectify a problem and shall include procedures for realigning and testing the equipment. Troubleshooting shall include either a list of test points with the applicable voltage levels or waveforms that would be present under a certain prescribed set of conditions, a troubleshooting chart listing the symptom, probable cause and remedy, or a narrative containing sufficient data to enable a test technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also be provided describing the preferred method of repairing or replacing discrete components mounted on printed circuit boards or located in areas where special steps must be followed to disassemble the equipment. Procedures shall be included to realign and test the equipment at the completion of repairs and to restore it to its original operating condition. These procedures shall be supported by the necessary waveforms and voltage levels, and data for selecting matched components. Diagrams, either photographic or line, shall show the location of printed circuit board mounted components. (h) Section VI, Replacement Parts List. The replacement parts list shall list, in alphanumeric order, all electrical/electronic, mechanical and pneumatic components, their description, value and tolerance, true manufacturer and manufacturers' part number. (i) Section VII, Drawings. Wiring and schematic diagrams shall be included. The drawings will depict the circuitry using standard symbols and shall include the reference designations and component values or type designators. Drawings shall be clear and legible and shall not be engineering or productions sketches. The terms and conditions of the contractor's FSS contract (including any contract modifications) apply to all Blanket Purchase Agreements (BPA) and task or delivery orders issued under the contract as a result of this RFQ. When a lower price has been established, or when the delivery terms, FOB terms, or ordering requirements have been modified by the BPA or task/delivery order, those modified terms will apply to all purchases made pursuant to it and take precedence over the FSS contract. Any unique terms and conditions of a BPA or order issued under the contract that are not a part of the applicable FSS contract will govern. In the event of an inconsistency between the terms and conditions of a BPA or task/delivery order and the Contractor's FSS terms, other than those identified above, the terms of the FSS contract will take precedence (Note: as used in this clause, the term "brand name" includes identification of products by make and model.) (a) If items called for by this invitation for bids have been identified in the schedule by a "brand name or equal" description, such identification is intended to be descriptive, but not restrictive, and is to indicate the quality and characteristics of products that will be satisfactory. Bids offering "equal" products (including products of the brand name manufacturer other than the one described by brand name) will be considered for award if such products are clearly identified in the bids and are determined by the Government to meet fully the salient characteristics requirements listed in the invitation. (b) Unless the bidder clearly indicates in the bid that the bidder is offering an "equal" product, the bid shall be considered as offering a brand name product referenced in the invitation for bids. (c)(1) If the bidder proposes to furnish an "equal" product, the brand name, if any, of the product to be furnished shall be inserted in the space provided in the invitation for bids, or such product shall be otherwise clearly identified in the bid. The evaluation of bids and the determination as to equality of the product offered shall be the responsibility of the Government and will be based on information furnished by the bidder or identified in his/her bid as well as other information reasonably available to the purchasing activity. CAUTION TO BIDDERS. The purchasing activity is not responsible for locating or securing any information that is not identified in the bid and reasonably available to the purchasing activity. Accordingly, to insure that sufficient information is available, the bidder must furnish as a part of his/her bid all descriptive material (such as cuts, illustrations, drawings or other information) necessary for the purchasing activity to: (i) Determine whether the product offered meets the salient characteristics requirement of the Invitation for Bids, and (ii) Establish exactly what the bidder proposes to furnish and what the Government would be binding itself to purchase by making an award. The information furnished may include specific references to information previously furnished or to information otherwise available to the purchasing activity. (2) If the bidder proposes to modify a product so as to make it conform to the requirements of the Invitation for Bids, he/she shall: (i) Include in his/her bid a clear description of such proposed modifications, and (ii) Clearly mark any descriptive material to show the proposed modifications. (3) Modifications proposed after bid opening to make a product conform to a brand name product referenced in the Invitation for Bids will not be considered. contractor guarantees the equipment against defective material, workmanship and performance for a period of NLT one (1) year or manufacturer's standard warranty, said guarantee to run from date of acceptance of the equipment by the Government. The contractor agrees to furnish, without cost to the Government, replacement of all parts and material that are found to be defective during the guarantee period. Replacement of material and parts will be furnished to the Government at the point of installation, if installation is within the continental United States, or f.o.b. the continental U.S. port to be designated by the contracting officer if installation is outside of the continental United States. Cost of installation of replacement material and parts shall be borne by the contractor. Rejected goods will be held subject to contractors order for not more than 15 days, after which the rejected merchandise will be returned to the contractor's address at his/her risk and expense. Expenses incident to the examination and testing of materials or supplies that have been rejected will be charged to the contractor's account. a) To improve the timeliness of payments and lower overall administrative costs, VA strongly encourages contractors to submit invoices using its electronic invoicing system. At present, electronic submission is voluntary and any nominal registration fees will be the responsibility of the contractor. VA intends to mandate electronic invoice submission, subject to completion of the federal rulemaking process. At present, VA is using a 3rd party agent to contact contractors regarding this service. During the voluntary period, contractors interested in registering for the electronic system should contact the VA's Financial Services Center at http://www.fsc.va.gov/einvoice.asp.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/WRJVAMROC/DVAMROC/VA241-13-Q-0426/listing.html)
- Place of Performance
- Address: Jamaica Plain, MA 02130
- Zip Code: 02130-4817
- Zip Code: 02130-4817
- Record
- SN03036863-W 20130417/130415234714-269a018cd9211534eb25f7ee91852d96 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |