MODIFICATION
67 -- Pan/Tilt Device
- Notice Date
- 4/26/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- 143 Crosier Street-2nd Floor, White Sands Missile Range, NM 88002
- ZIP Code
- 88002
- Solicitation Number
- W9124Q-13-T-Tilt
- Response Due
- 4/30/2013
- Archive Date
- 10/27/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W9124Q-13-T-Tilt and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-66. The associated North American Industrial Classification System (NAICS) code for this procurement is 334511 with a small business size standard of 750.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-04-30 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be White Sands Missile Range, NM 88002 The MICC White Sands Missile Range requires the following items, Meet or Exceed, to the following: LI 001: Pan and Tilt Device -equipment (device) that remotely controls azimuth and elevation of cameras -handle a torque of 50 lb-ft (threshold) and 100 lb-ft (objective) -shall be remotely accessible by serial (RS232 Communication Link (threshold) and Ethernet IP communication link (objective) -azimuth range from 0 degrees to 340 degrees (threshold) and 0 degrees to 360 degrees (objective) -device elevation range from +45 degrees to 60 degrees (threshold) and +-0 degrees (objective) -operate in temperatures from -10 degrees to 50 degrees Celsius -accept presets via remote control software (threshold and objective) -must be controllable with PTCR-96 Remote Control Emulator V 2.00 software controller -shall also be controllable with C-JCC-116-NL (Controller Joystick) hardware controller., 1, EA; LI 002: Shipping - Shipping must be free on board (FOB) destination, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC White Sands Missile Range intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC White Sands Missile Range is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. ORCA Registration: FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt 1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. Questions concerning this buy must be submitted at least 2 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. The following FAR clauses will apply: 52.204-7, 52.204-99, 52.207-4, 52.212-3, 52.225-18, 52.225-25, 52.232-99, 52.246-16 and 52.247-34. Additional FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.203-6, 52.204-10, 52.209-6, 52.209-10, 52.211-6, 52.219-8, 52.219-28, 52.222-18, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-13, and 52.232-33. The full text of a FAR clause may be accessed electronically at http://farsite.hill.af.mil/. The following DFAR clauses will apply: 252.203-7002, 252.203-7005, 252.204-7003, 252.204-7004 Alt. A, 252.204-7008, 252.211-7003, 252.223-7008, 252.232-7010 and 252.243-7001. Additional DFAR clauses found in DFAR clause 252.212-7001, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items Applicable to Defense Acquisitions of Commercial Items, will apply: 252.203-7000, 252.225-7001, 252.232-7003 and 252.247-7023. The full text of a DFAR clause may be accessed electronically at http://farsite.hill.af.mil/. SAM Requirement - Company must be registered on System for Award Management (SAM) in order to receive an award for this acquisition. If the company is not registered in SAM, they may do so by going to the SAM web site at https://www.sam.gov/portal/public/SAM/. Company must be registered on Wide Area Workflow (WAWF) in order to receive payment for this acquisition. If the company is not registered in WAWF, they may do so by going to WAWF web site at https://wawf.eb.mil/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/f5e2dafb8c07f0c57c6222744fef9f9d)
- Place of Performance
- Address: White Sands Missile Range, NM 88002
- Zip Code: 88002
- Zip Code: 88002
- Record
- SN03046678-W 20130428/130426234221-f5e2dafb8c07f0c57c6222744fef9f9d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |