SOURCES SOUGHT
10 -- Rifling on a Tantalum/ 10 Tungsten (Ta10W)
- Notice Date
- 5/2/2013
- Notice Type
- Sources Sought
- Contracting Office
- ACC - New Jersey, Center for Contracting and Commerce, Building 10 Phipps RD, Picatinny Arsenal, NJ 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN13XC005
- Response Due
- 6/3/2013
- Archive Date
- 7/1/2013
- Point of Contact
- Katelyn Warren, 5182665088
- E-Mail Address
-
ACC - New Jersey
(katelyn.a.warren3.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- The Army Contracting Command-New Jersey, Emerging Technologies Contracting Center, Benet Laboratories (BL), Watervliet Arsenal, NY on behalf of the US Army Armament Research Development & Engineering Command (ARDEC), BL is seeking capability statements from firms that can provide services to rifle both.50 cal M2 and M242 25mm weapons of refractory material consisting of tantalum/10 tungsten (Ta/10W) alloys. This rifling service is for engraving the grooves unto the bores of both.50 cal M2 and M242 25mm weapon systems. The rifling engravings will follow the existing standard patterns stated on the respective weapons production drawing. The source shall have the ability to: conduct and record bore measurements for both weapon calibers after rifling, measure and reporting the rifling depth in respect to the rifling lands height, measure at a minimum of 1 inch intervals at 0 and 90 degree diameter locations for both.50 cal M2 and M242 25mm weapons and, be familiar with fabrication and inspection techniques used with gun bores. Requirements: 1.Flexibility in producing rifling patterns by CNC or dedicated pattern plates 1.1Minimum bore size 0.50 inches 1.2Maximum bore size 1.00 (25mm) 1.3Maximum Length of tube 85 inches 1.4Machine must be able to quote mark Push quote mark, and quote mark Pull quote mark modes of Rifling 2.Rifling System tooling and work holding ability: 2.1Rifling Machine must have the ability to facilitate single point tooling 2.2Rifling Machine must have the ability to facilitate hook tooling 2.3Rifling Machine must have the ability to facilitate crown broach tooling 3.NDT Inspection Ability and Imaging Capabilities: 3.1Must have ability to inspect and record finished bore length by Video Bore- Scope 3.2Must have ability to inspect and record finished rifled land at 1.0 inch intervals throughout the bore length by star-gage at 0 and 90 degree location 3.3Laser bore inspection ability (LTC) is highly desirable Quality Assurance: The vendor shall be ITAR compliant, ISO 9002:2000 compliant, and agree to the terms of the ARDEC-Benet non-disclosure agreement (NDA). Deliverables: 1.Interested organizations should submit a tailored capability statement for these requirements that clearly details the ability to perform the aspects of the notice described above. All proprietary information should be marked as such. Responses will be reviewed only by ARDEC personnel and will be held in a confidential manner. 2.The capability statement shall include system specifics including: i.Documented past performance history of rifling Tantalum/10 Tungsten (Ta10W) ii.Model and specifications of Rifling Machine iii.Measurement capability Firms/companies are invited to indicate their capabilities by providing specifications, brochures, manuals, reports, demonstration video and other technical data. All data should be sent at no cost to the US Government by 03 June 2013 to the US Army ATTN: Katelyn Warren email: Katelyn.a.warren3.civ@mail.mil. In addition, please provide the firm's name and address, point of contact with telephone number and email address, and size of business (small/large). The Government will accept written questions by email. Provide Past Performance information or lack thereof showing prior commercial experience and/or prior service for the Government in the service described above. This is a market survey to be used for informational planning purposes only and shall not be construed as a Request for Proposal (RFP), nor is the Government obligated to issue an RFP. The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited. The government is not obligated to notify respondents of the results of this survey.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/853bec027690d5aac962111a4ca1b7e4)
- Place of Performance
- Address: Benet Laboratories 1 Buffington St Watervliet NY
- Zip Code: 12189
- Zip Code: 12189
- Record
- SN03051968-W 20130504/130502235424-853bec027690d5aac962111a4ca1b7e4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |