MODIFICATION
39 -- 20' Load Leveling Spreader, Low Profile
- Notice Date
- 5/3/2013
- Notice Type
- Modification/Amendment
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- Department of the Air Force, Air Combat Command, 99 CONS, 5865 Swaab Blvd, Nellis AFB, Nevada, 89191-7063, United States
- ZIP Code
- 89191-7063
- Solicitation Number
- F3GHBA3108A001-LoadLevelingSpreader
- Archive Date
- 5/25/2013
- Point of Contact
- Thomas M. Schaefer, Phone: 7026825321
- E-Mail Address
-
thomas.schaefer@nellis.af.mil
(thomas.schaefer@nellis.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- STATEMENT OF WORK FOR LOAD LEVELING 20 FOOT SPREADER CONTAINER LIFTER The below specifications detail the requirement for load leveling 20 foot spreader that is suitable to lift ISO shipping containers. The contractor shall provide all labor, equipment, supplies, materials, engineering design, and supervision to design, manufacture, and deliver this equipment. Design and delivery shall be coordinated with the Contracting Officer's Representative (COR). PHYSICAL SPECIFICATIONS: 1) Must have a minimum of 80,000 lb Work Load Limite (WLL) 2) Work Load Limit must be visibly marked on the lifter in at least two locations and must be placed in such a way as the markings are visible during product use 3) Must be proof/load tested to a minimum of 125% 4) Shall be designed with a minimum Safety Factor of 3:1 to yeild strength and 5:1 to ultimate strength. 5) Must comply with ISO 3874 and ANSI/ASME B30.20 standards 6) Must be low-profile 7) All components shall be primed and painted in a durable paint coating that is bright or reflective safety colored to provide appropriate corrosion resistence. Touch-up paint will be required to repair any damages during shipping. 8) Must be load-leveling for off-center loading 9) Must have a lift eye that is adjustable at a minimum of 48 inches off center on each side and will not require personnel to be on top of the container to adjust 10) Adjustable lift eye must not slip when lifted 11) Must have a minimum of four indicator flags that are clearly distinguishable between the locked and unlocked positions of the twistlocks 12) Indicator flags must be positioned such that they are visible at a distance for both the crane operator and spotters 13) Locking and unlocking of twistlocks must be accomplished bia a pull rope or chain such that locking/unlocking can be accomplished without any personnel climbing on top of the container 14) Must be fully assembled upon delivery CONSTRUCTION SPECIFICATION: Purchased components must meet two requirements. The component is top of the line in quality and replacement parts are locally available to the customer throught the United States. WARRANTY: Prospective vendors shall be able to provide direct manufacturer support and shall directly issue a manufacturer's limited factor warranty ot the government. REQUESTED SUBMITTAL INFORMATION: 1) If applicable, brand names of major purchased components provided as part of the spreader assembly shall be annoted on the vendor offering. This information is for REFERENCE ONLY and should not be construed as an attempt to limit competition. Specified brand names provided will not be given any weight during technical review and evaluation. 2) Vendor shall provide a cut sheet(s), schematic(s), diagram(s), or similar clearly indicating spreader assembly features. DELIVERY LOCATION: The delivery area is located on Nellis Air Force Base, approximately nine miles north of Las Vegas, Nevada on US Highway 15. The exact location of the 820th RED HORSE squadron is 5179 Malmstrom Ave, Las Vegas, NV, 89191. CODES: Vendor shall comply with accepted manufacturer process, as well as current Occupational Safety and Health Administration, Labor Department, and Nevada codes, laws and regulations as applicable to this statement of work. FINAL INSPECTION: All material delivered must meet specifications provided and will be inspected by 820th RHS Engineers. Please note that this "Sources Sought" notice has been amended. A typographical error was noticed in regards to the required WLL. The minimum WLL has been changed from 800,000 lbs to 80,000 lbs. Reference PHYSICAL SPECIFICATIOINS, Number 1.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/ACC/99CONS/F3GHBA3108A001-LoadLevelingSpreader/listing.html)
- Place of Performance
- Address: Nellis AFB, Las Vegas, NV, Nellis AFB, Nevada, 89191, United States
- Zip Code: 89191
- Zip Code: 89191
- Record
- SN03052073-W 20130505/130503234214-646656ddf0e9171453386ace455373ef (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |