MODIFICATION
78 -- Gym Equipment
- Notice Date
- 5/8/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- 1733 Pleasonton Road, Fort Bliss, TX 79916
- ZIP Code
- 79916
- Solicitation Number
- PR10297679
- Response Due
- 5/13/2013
- Archive Date
- 11/9/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR10297679 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-66. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-05-13 14:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Biggs Field, TX 79916 The MICC Fort Bliss requires the following items, Meet or Exceed, to the following: LI 001: Four (4) Hi-Temp Bumper Plate Sets: FFP a. Each set must consist of 10x10lbs plates, 4x15lbs plates, 10x25lbs plates, 4x35lbs plates, and 10x45lbs plates. b. Hi-Temp bumber plates with stainless steel bushing. c. 2" stainless steel insert, inset below plane of plate., 4, EA; LI 002: KETTLE BALL 8KG FFP a. Must weigh 8KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b. Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 12, EA; LI 003: KETTLE BALL 12KG FFP a. Must weigh 12KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b.Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 12, EA; LI 004: KETTLE BALL 16KG FFP a. Must weigh 16KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b. Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 40, EA; LI 005: KETTLE BALL 20KG FFP a. Must weigh 20KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b. Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 16, EA; LI 006: KETTLE BALL 24KG FFP a. Must weigh 24KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b. Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 40, EA; LI 007: KETTLE BALL 32KG FFP a. Must weigh 32KG or the equivalent in pounds Black Coat; Solid gravity cast iron, hammer tone finish b. Single piece casting with seamless handle, machined wide flat base, matte powder coat finish., 20, EA; LI 008: Commercial Grade Spring Collars for Olympic Barbell: FFP a. Must have the same diameter as the barbells b. Operation levers must have covered grips to prevent pinching, 20, PR; LI 009: Commercial Grade Speed Ropes FFP a. Must be coated steel cable construction b. Must include aluminum dowel handles to maximize speed, 80, EA; LI 010: Commercial Grade Plyo Box Sets FFP a. Each set must consist of 20?, 24?, and 30? height boxes. b. Boxes may be constructed of wood or metal, 20, EA; LI 011: Commercial Grade Climbing Ropes FFP a. Rope must measure 1.5? thick b. Rope must measure 20? in length c. Rope must having anti-fraying end d. Rope must have mounting bracket or braided eyelet for installation, 40, EA; LI 012: Commercial Grade Medicine Balls: padded cloth exterior to deter puncture FFP a. Must weigh 10lbs or the equivalent in kilograms b. Each ball must measure approximately 14? in diameter c. Soft shell, heavy duty vinyl coated nylon construction to hold shape over time d. Ball remains dimensionally stable and balanced during use e. Balls must be color coded by weight for easy identification, 30, EA; LI 013: Commercial Grade Medicine Balls: padded cloth exterior to deter puncture FFP a. Must weigh 14lbs or the equivalent in kilograms b. Each ball must measure approximately 14? in diameter c. Soft shell, heavy duty vinyl coated nylon construction to hold shape over time d. Ball remains dimensionally stable and balanced during use e. Balls must be color coded by weight for easy identification, 40, EA; LI 014: Commercial Grade Medicine Balls: padded cloth exterior to deter puncture FFP a. Must weigh 20lbs or the equivalent in kilograms b. Each ball must measure approximately 14? in diameter c. Soft shell, heavy duty vinyl coated nylon construction to hold shape over time d. Ball remains dimensionally stable and balanced during use e. Balls must be color coded by weight for easy identification, 60, EA; LI 015: Commercial Grade Medicine Balls: padded cloth exterior to deter puncture FFP a. Must weigh 8lbs or the equivalent in kilograms b. Each ball must measure approximately 14? in diameter c. Soft shell, heavy duty vinyl coated nylon construction to hold shape over time d. Ball remains dimensionally stable and balanced during use e. Balls must be color coded by weight for easy identification, 10, EA; LI 016: Commercial Grade Barbells: FFP a. 28mm shaft rated at a minimum of 155 PSI b. Hard Chrome 16" Collars c. Must weigh 20KG or the equivalent in pounds d. International Weightlifting Federation (IWF) specification knurling with no center knurling and rings are properly spaced in accordance with IWF specifications. e. Snap ring self lubricating oil-lite bushing for smooth even spin., 20, EA; LI 017: Agility Ladders FFP a. Each ladder must be at least 15? long and have at least ten slats, 20, EA; LI 018: Commercial Grade Power Sleds FFP a Sleds must be designed to be pushed or pulled b.Each sled must include an adjustable shoulder harness and lead rope c. Sleds must have a mounting pole for weights compatible with the bumper plates, 40, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Bliss intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Bliss is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This clause implements the temporary policy provided by OMB Policy Memorandum M-12-16, Providing Prompt Payment to Small Business Subcontractors, dated July 11, 2012 (a) Upon receipt of accelerated payments from the Government, the contractor is required to make accelerated payments to small business subcontractors to the maximum extent practicable after receipt of a proper invoice and all proper documentation from the small business subcontractor. (b) Inclue the substance of this clause, including this paragraph (b), in all subcontracts with small business concerns. (c) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (a) Definitions. As used in this clause? ?Central Contractor Registration (CCR) database? means the retired primary Government repository for Contractor information required for the conduct of business with the Government. ?Commercial and Government Entity (CAGE) code? means? (1) A code assigned by the Defense Logistics Agency (DLA) Logistics Information Service to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLA records and maintains in the CAGE master file. This type of code is known as an ?NCAGE code.? ?Data Universal Numbering System (DUNS) number? means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. ?Data Universal Numbering System+4 (DUNS+4) number? means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern. ?Registered in the SAM database? means that? (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database; (2) The Contractor?s CAGE code is in the SAM database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record ?Active?. The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process. ?System for Award Management (SAM)? means the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It includes? (1) Data collected from prospective federal awardees required for the conduct of business with the Government; (2) Prospective contractor submitted annual representations and certifications in accordance with FAR Subpart 4.12; and (3) The list of all parties suspended, proposed for debarment, debarred, declared ineligible, or excluded or disqualified under the nonprocurement common rule by agencies, Government corporations, or by the Government Accountability Office. (b)(1) The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. (3) If indicated by the Government during performance, registration in an alternate system may be required in lieu of SAM. (c) If the Contractor does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) A contractor may obtain a DUNS number? (i) Via the internet at http://fedgov.dnb.com/webform or if the contractor does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The contractor should indicate that it is a contractor for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The Contractor should be prepared to provide the following information: (i) Company legal business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company physical street address, city, state and Zip Code. (iv) Company mailing address, city, state and Zip Code (if separate from physical). (v) Company telephone number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) Reserved. (e) Processing time for registration in SAM, which normally takes five business days, should be taken into consideration when registering. Contractors who are not already registered should consider applying for registration at least two weeks prior to invoicing. (f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government?s reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g)(1)(i) If a Contractor has legally changed its business name, ?doing business as? name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer sufficient documentation to support the legally changed name with a minimum of one business day?s written notification of its intention to? (A) Change the name in the SAM database; (B) Comply with the requirements of subpart 42.12 of the FAR; and (C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the ?Suspension of Payment? paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor?s SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the ?Suspension of payment? paragraph of the EFT clause of this contract. (h) Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls. (End of Clause) New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/b4f82db2b3ad92cf51a0159167e69ba9)
- Place of Performance
- Address: Biggs Field, TX 79916
- Zip Code: 79916
- Zip Code: 79916
- Record
- SN03056631-W 20130510/130508235323-b4f82db2b3ad92cf51a0159167e69ba9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |