SOLICITATION NOTICE
20 -- SCHEDULED DRY-DOCK REPAIRS USCGC TACKLE (WYTL-65604) FY13 - Specification
- Notice Date
- 6/6/2013
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG85-13-Q-P45808
- Archive Date
- 7/23/2013
- Point of Contact
- Jack Rodman, Phone: (510) 637-5988, Jay S McReynolds, Phone: 510-637-5975
- E-Mail Address
-
Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil
(Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- Specification USCGC TACKLE The United States coast guard surface forces Logistics Center, Contracting and Procurement branch 2 IBCT Product Line intends to issue a Commercial Request for Quote for Dry-Dock Repairs for the United States Coast Guard Cutter: TACKLE (WYTL-65604). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1000 employees. The simplified acquisition will be issued as a Best Value for Quote (RFQ) on or about June 7, 2013. The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS UNRESTRICTED FULL AND OPEN The performance period will be based following Cutter's Availability dates and completion time: USCGC TACKLE (WYTL-65604) will be available from September 18, 2013 through October 30, 2013 (43) forty-three days after vessel becomes available. PLACE OF PERFORMANCE: The place of performance will be at the contractor's facility. The Geographic Restriction for the Cutter is 175 nautical miles one-way. DESCRIPTION OF WORK The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC TACKLE (WYTL-65604). This work will include, but is not limited to: ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE O-001 Hull and Structural Plating (General) -10.2-Pound Steel, Repair 4 SQFT 25 O-002 Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair 4 SQFT 25 O-003 Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Repair 4 SQFT 25 O-004 Hull and Structural Plating (General) - Degraded Weld (Steel), Repair FT 50 D-005 Appendages (U/W), Leak Test JOB 1 O-006 Appendages (U/W) - Internal, Preserve EA 4 D-007 Voids (Non-Accessible), Leak Test JOB 1 O-008 Voids (Non-Accessible), Preserve Internal Surfaces EA 2 O-009 Tanks (Potable Water), Clean and Inspect JOB 1 D-010 Propulsion Shafting; Remove, Inspect, and Reinstall JOB 1 O-011 Propulsion Shafting, Straighten JOB 1 D-012 Propeller, Remove, Inspect, and Reinstall JOB 1 O-013 Propeller, Perform Minor Repairs and Reconditioning JOB 1 D-014 Keel Coolers, Clean, Inspect and Hydro JOB 1 D-015 Fathometer Transducer, Renew JOB 1 ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE D-016 Sea Strainers (All Sizes), Renew JOB 1 O-017 Halon 1301 Fire Extinguishing System Cylinder, Inspect and Test JOB 1 D-018 Rudder Assembly, Remove, Inspect and Reinstall JOB 1 O-019 Decks - Exterior, Preserve JOB 1 D-020 U/W Body, Preserve "100%" JOB 1 O-021 Stern Tube Interior Surfaces, Preserve 100% JOB 1 O-022 Hull Plating Freeboard, Preserve -"100%" JOB 1 D-023 Cathodic Protection / Zinc Anodes, Renew JOB 1 D-024 Drydocking JOB 1 D-025 Temporary Services, Provide JOB 1 D-026 Sea Trial Performance, Provide Support JOB 1 D-027 Hull Plating (U/W Body), Ultrasonic Testing EA 200 D-00A Composite Labor Rate Hour 200 D-00B GFP Report NSP EA NSP D-00C Travel and Perdiem JOB O-00Z Laydays Day 5 The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties. Potential contractors are strongly encouraged to make a Ship Check. For access please MKC Jason McIntire at (207) 594-7954 email: Jason.L.McIntire@uscg.mil or LT. Roger Cross at (617) 223-3500, Mobile: (617) 512-3279, email: Roger.A.Cross@uscg.mil Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at (510) 637-5988 or email: Jack.E.Rodman@uscg.mil. CUTTER CLEARANCES: Minimum Water Depth: 8 feet; Minimum Height Clearance: 35 feet. CERTIFICATIONS: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Contractors shall provide a current certification of its drydocking facility as required by the specification, Work Items D-024 Routine Dry-docking for tender SFLC Standard Specification 8634. When requested by the Contracting Officer, the Contractor shall also provide the pre-award calculations described in specification Work Items D-024 Routine Dry-docking, Cutter Conditions, and Appendix A, B or C of the SFLC Standard Specification 8634. Subsequent to contract award, the Government will require the Contractor to provide the docking and un-docking calculations described in Appendix A, B or C of the SFLC Standard Specification 8634. For further information or questions regarding this solicitation, please contact Jack Rodman at (510) 637-5988 or via email: Jack.E.Rodman@uscg.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG85-13-Q-P45808/listing.html)
- Record
- SN03081669-W 20130608/130606235251-52b1dcc3515c84b924612da1a917f582 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |