SOURCES SOUGHT
51 -- SOURCES SOUGHT - AUTOMATED TOOL CONTROL (ATC) SYSTEM AND TOOL KITS
- Notice Date
- 6/6/2013
- Notice Type
- Sources Sought
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- USPFO for Connecticut, 360 Broad Street, Hartford, CT 06105-3795
- ZIP Code
- 06105-3795
- Solicitation Number
- M91-3096-0602
- Response Due
- 6/17/2013
- Archive Date
- 8/5/2013
- Point of Contact
- Thomas Tortorella, 860-524-4840
- E-Mail Address
-
USPFO for Connecticut
(thomas.tortorella@ng.army.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS SOURCES SOUGHT IS BEING ISSUED FOR PLANNING AND MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION. RESPONSES TO THIS NOTICE ARE NOT CONSIDERED AS OFFERS AND CANNOT BE ACCEPTED BY THE GOVERNMENT TO FORM A BINDING CONTRACT. THE GOVERNMENT WILL NOT BE RESPONSIBLE FOR ANY COSTS INCURRED BY INTERESTED PARTIES RESPONDING TO THIS SOURCES SOUGHT. The Connecticut National Guard is seeking contractors who are capable of providing an Automated Tool Control (ATC) System located at a CT Army National Guard facility in Groton, CT 06340. ATC System consists of: - ATC 54IN W/CASTERS 110V, 8 each - ATC 36IN W/CASTERS 110V, 8 each - ADMIN SOFTWARE W/BADGE SCANNER, 1 each - ONE (1) YEAR ATC EXTENDED SERVICE PLAN, 1 each System requirements: - 8 Sets of tool boxes on casters to support 935 individual hand tools each set. Design/layout will leave enough open space for one empty drawer in each set for future expansion. - Additional tools will be provided to complete tool kitting for conversion to bay tool kits (see Tool Listing below). - Tool pockets will be precision cut in foam and etched with tool part number. - System will utilize digital imaging scanning for tool check out/in. - System will be networkable and management software included. Management software requirements: - Provide customizable access control to authorized users thru individually assigned badges. - Record tool usage history by user and tool box. - Report lost/overdue/unreturned tools via e-mail to assigned administrators. - Provide for tool status reporting for the following conditions: Normal, Lost, Repair Requested, Replacement Requested, Calibration Requested, Inspection Requested, Out for Calibration/Inspection, Not Received, Not Available. - Allow for re-programming/reimaging of drawers when reconfiguration of tool layout is required. Tool requirements: - Cordless Screwdriver, 16 each - Mini Vac, 16 each - 90 DEGREE GRINDER, 8 each - 4AAA Flashlight, 40 each - Screwdriver, Ratcheting, Magnetic, T-Handle, Stubby, Orange, 8 each - Screwdriver, Phillips ACR, Instinct Hard Handle, #2, Orange, 24 each - SCREWDRIVER, CROSS-TIP, NO. 2 (15 quote mark blade), 8 each - SCREWDRIVER, CROSS-TIP, NO. 2 (1-1/2 quote mark blade), 8 each - SCREWDRIVER, CROSS-TIP, NO. 1 (2-1/2 quote mark blade), 8 each - SCREWDRIVER, CROSS-TIP, NO. 2 (3-1/2 quote mark blade), 8 each - SCREWDRIVER, CROSS-TIP, NO. 2 (5-1/2 quote mark blade), 8 each - SCREWDRIVER, FLAT-TIP (5/16 quote mark tip, 5-1/2 quote mark blade), 8 each - SCREWDRIVER, FLAT-TIP (1/4 quote mark tip, 3-1/2 quote mark blade), 8 each - SCREWDRIVER, FLAT-TIP (7/32 quote mark tip, 2-1/2 quote mark blade), 8 each - SCREWDRIVER, FLAT-TIP (1-1/2 quote mark blade), 8 each - MAGNIFIER (2-lens), 8 each - MIRROR, INSPECTION (round, orange handle), 8 each - RETRIEVING TOOL, MAGNETIC (small, extendable, round mirror), 8 each - PLIERS (35 degree angle, needle nose), 8 each - PLIERS (11 quote mark long, needle nose), 8 each - PLIERS (7-3/4 quote mark duckbill), 16 each - PLIERS, DIAGONAL CUTTING (7-3/4 quote mark long), 16 each - PLIERS, DIAGONAL CUTTING, HD STORK CUT (11 quote mark long), 16 each - PLIERS, SLIP JOINT (cannon plug pliers), 8 each - PLIERS, WIRE TWISTER, 8 each - RULE, MACHINIST 6 IN (Starrett), 8 each - Wrench, Ratcheting Box, Standard Length, 0 Offset, 1/2 quote mark -9/16 quote mark, 12-Point, 16 each - Wrench, Ratcheting Box, Standard Length, 0 Offset, 3/8 quote mark -7/16 quote mark, 12-Point, 16 each The planned NAICS (North American Industry Classification System) code for this requirement is 332216. All interested Contractors shall provide in writing, a notice stating their positive intention to submit a bid no later than 17 June 2013. This notification, which shall not exceed five (5) typewritten pages, must include: (1) Positive statement of intent to bid. (2) A completed and signed Sources Sought Information Request Form (attached). Contractors should indicate their interest to the Contracting Officer, in writing as early as possible, but no later than 4 p.m., 17 June 2013. Information shall be provided by e-mail to Major Thomas Tortorella at thomas.e.tortorella.mil@mail.mil or mail at: USPFO For Connecticut (P&C), Attn: Major Thomas Tortorella, 360 Broad St., Hartford, CT 06105. E-mail is the preferred method. THIS SOURCES SOUGHT IS BEING ISSUED FOR PLANNING AND MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION. RESPONSES TO THIS NOTICE ARE NOT CONSIDERED AS OFFERS AND CANNOT BE ACCEPTED BY THE GOVERNMENT TO FORM A BINDING CONTRACT. THE GOVERNMENT WILL NOT BE RESPONSIBLE FOR ANY COSTS INCURRED BY INTERESTED PARTIES RESPONDING TO THIS SOURCES SOUGHT.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA06/M91-3096-0602/listing.html)
- Place of Performance
- Address: USPFO for Connecticut 360 Broad Street Hartford CT
- Zip Code: 06105-3795
- Zip Code: 06105-3795
- Record
- SN03082638-W 20130608/130607001127-1dc1ac10b018fe5d3e3e462fba4fa077 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |