Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 28, 2013 FBO #4234
MODIFICATION

84 -- CRT TACTICAL EQUIPMENT

Notice Date

6/26/2013
 

Notice Type

Modification/Amendment
 

Contracting Office

SA-11, Dun Loring, VA 22027
 

ZIP Code

22027
 

Solicitation Number

PR2436729
 

Response Due

7/3/2013
 

Archive Date

12/30/2013
 

Point of Contact

Name: Granger Cissel, Title: Procurement Manager, Phone: 5712269620, Fax:
 

E-Mail Address

cisselg@state.gov;
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR2436729 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-66. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 500.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-07-03 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Sterling, VA 20166 The Department of State requires the following items, Meet or Exceed, to the following: LI 001: The Sloucher by First, the 6/12 Pocket Attachment System keeps the profile of the Sloucher low. It accepts Front, Side and Back Hard Plates and SPEAR/BALCS Cut Soft Armor. The Sloucher will accept MASS Accessories and pockets using 6/12, 6/9 or MOLLE/PALS. Utilizing the latest in FirstSpear technologies, including 6/12,pocket attachment and TUBES, The Sloucher is a state of the art capability designed to support the Full Spectrum of Operations. Features: ? Quickly integrates additional armor protection as mission dictates and provides 360 degrees pocket attachment fields utilizing the patent pending 6/12 attachment system technology for mission tailoring requirements. ? The vest can be removed without using Velcro for rapid access to administrative pockets or medical treatment to the torso at the left and right shoulders and/or the right left lower torso utilizing the patent pending ?TUBES? Releasing System. ? Fits Soft Armor cut to the shape requirements specified for US SOCOM SPEAR BALCS and Hard Armor plates cut to SAPI/ESAPI/SPEAR and Swimmer in the corresponding soft armor size, i.e. Medium Plate and Medium Soft Armor fit a Medium Carrier. ? 2 ? ?quick release? point options utilizing the ?TUBES? (patent pending) system that allows for quick removal and assembly within seconds, while keeping the vest in 1 piece. o The common closure method for most Armor Carriers on the market today is to join the cummerbund in the front with hook & loop fasteners like Velcro. This presents many performance failures. The hook & loop adds weight and bulk; is noisy and wears out quickly; and retains water, mud and snow. From a safety standpoint the hook & loop closure flap allows for cummerbund protection accessories like side plates and inflatable floatation to shift position and misalign from where they should be to provide maximum performance. The common release mechanisms found in most releasable vests typically utilize a variety of cables, routed through a complex maze of channels that when assembled correctly, are clumsy, heavy, awkward and difficult to reassemble. When assembled incorrectly, the results can be catastrophic. ? Polymer Release hardware (patent pending ? TUBES) is made from lightweight high-performance polymers that exceed the strength of the standard molded fasteners used with other manufactures vest. ? Polymer Release hardware (patent pending ? TUBES) is molded in signature IR polymer and meets US MIL-SPEC requirements for IR reduction. ? Made with laminated 500 Denier Cordura Nylon. ? Has an inner and outer cummerbund for comfort and fit ? Comes with optional 520 (E) TWEEVE sleeve to conceal the shoulder strap or a padded sleeve for comfort. Specifications ? Sewn with VT-95 Size E/F Nylon bonded thread which complies with US MILSPEC A-A-59826. ? Mesh NR86 complies with US MILSPEC Mil-C-8061 ? Webbing complies with US MILSPEC Mil-W-17337 and Mil-w-AA55301 ? Nylon complies with US MILSPEC Mil-C-43734D ? Weight: 1.96lbs (Medium) Colors available: Coyote, Ranger Green, Black, REQUESTING- Color: Coyote, SIZE: MEDIUM (SEE ATTACHED PICTURE), 10, EA; LI 002: The Sloucher by First, the 6/12 Pocket Attachment System keeps the profile of the Sloucher low. It accepts Front, Side and Back Hard Plates and SPEAR/BALCS Cut Soft Armor. The Sloucher will accept MASS Accessories and pockets using 6/12, 6/9 or MOLLE/PALS. Utilizing the latest in FirstSpear technologies, including 6/12,pocket attachment and TUBES, The Sloucher is a state of the art capability designed to support the Full Spectrum of Operations. Features: ? Quickly integrates additional armor protection as mission dictates and provides 360 degrees pocket attachment fields utilizing the patent pending 6/12 attachment system technology for mission tailoring requirements. ? The vest can be removed without using Velcro for rapid access to administrative pockets or medical treatment to the torso at the left and right shoulders and/or the right left lower torso utilizing the patent pending ?TUBES? Releasing System. ? Fits Soft Armor cut to the shape requirements specified for US SOCOM SPEAR BALCS and Hard Armor plates cut to SAPI/ESAPI/SPEAR and Swimmer in the corresponding soft armor size, i.e. Medium Plate and Medium Soft Armor fit a Medium Carrier. ? 2 ? ?quick release? point options utilizing the ?TUBES? (patent pending) system that allows for quick removal and assembly within seconds, while keeping the vest in 1 piece. o The common closure method for most Armor Carriers on the market today is to join the cummerbund in the front with hook & loop fasteners like Velcro. This presents many performance failures. The hook & loop adds weight and bulk; is noisy and wears out quickly; and retains water, mud and snow. From a safety standpoint the hook & loop closure flap allows for cummerbund protection accessories like side plates and inflatable floatation to shift position and misalign from where they should be to provide maximum performance. The common release mechanisms found in most releasable vests typically utilize a variety of cables, routed through a complex maze of channels that when assembled correctly, are clumsy, heavy, awkward and difficult to reassemble. When assembled incorrectly, the results can be catastrophic. ? Polymer Release hardware (patent pending ? TUBES) is made from lightweight high-performance polymers that exceed the strength of the standard molded fasteners used with other manufactures vest. ? Polymer Release hardware (patent pending ? TUBES) is molded in signature IR polymer and meets US MIL-SPEC requirements for IR reduction. ? Made with laminated 500 Denier Cordura Nylon. ? Has an inner and outer cummerbund for comfort and fit ? Comes with optional 520 (E) TWEEVE sleeve to conceal the shoulder strap or a padded sleeve for comfort. Specifications ? Sewn with VT-95 Size E/F Nylon bonded thread which complies with US MILSPEC A-A-59826. ? Mesh NR86 complies with US MILSPEC Mil-C-8061 ? Webbing complies with US MILSPEC Mil-W-17337 and Mil-w-AA55301 ? Nylon complies with US MILSPEC Mil-C-43734D ? Weight: 1.96lbs (Medium) Colors available: Coyote, Ranger Green, Black, REQUESTING- Color: Coyote, SIZE: LARGE (SEE ATTACHED PICTURE), 14, EA; LI 003: Duty, Belt, Ballistic Nylon - Cordura Ballistic? Duty Belt features a triple-release retention buckle for the ultimate in security, plus padded edges for the ultimate in comfort. BlackHawk's? ergonomically designed Duty Belt also comes with a nylon loop backing that mates perfectly to Blackhawk? Cordura Ballistic? Trouser Belt. Size Medium, 10, EA; LI 004: Duty, Belt, Ballistic Nylon - Cordura Ballistic? Duty Belt features a triple-release retention buckle for the ultimate in security, plus padded edges for the ultimate in comfort. BlackHawk's? ergonomically designed Duty Belt also comes with a nylon loop backing that mates perfectly to Blackhawk cordura Ballistic Trouser Belt. Size Large, 14, EA; LI 005: The Gentex Level IIIA Personnel Protective Armor System Ground Troops (PASGT) helmet, also referred to as the Lightweight LE helmet, is specifically designed to protect law enforcement and other personnel from ballistic threats. It exceeds the v50 requirements of MIL-H-44099A with a velocity of 2150 feet per second and Level IIIA 9mm projectile at 1400 feet per second.Weighing less than earlier PASGT helmets, it offers improved retentions and suspensions for comfort and stability compatible with protective gas masks. Available helmet retentions include the standard police 3-Point or a modified version of the new U. S. Marine Corps (USMC) 4-Point design. Available retentions include a padded or mesh crown pads with foam lined headbands or a pad suspension, which can be adjusted in thickness Size: Medium, 10, EA; LI 006: The Gentex Level IIIA Personnel Protective Armor System Ground Troops (PASGT) helmet, also referred to as the Lightweight LE helmet, is specifically designed to protect law enforcement and other personnel from ballistic threats. It exceeds the v50 requirements of MIL-H-44099A with a velocity of 2150 feet per second and Level IIIA 9mm projectile at 1400 feet per second.Weighing less than earlier PASGT helmets, it offers improved retentions and suspensions for comfort and stability compatible with protective gas masks. Available helmet retentions include the standard police 3-Point or a modified version of the new U. S. Marine Corps (USMC) 4-Point design. Available retentions include a padded or mesh crown pads with foam lined headbands or a pad suspension, which can be adjusted in thickness Size:Large, 14, EA; LI 007: Safariland Tactical Holster 6004-836-121 Features the SLS (Self Locking System) rotating hood system, SLS allows for a smoother, single-motion draw and greater protection against attempted weapon takeaways, Thermal-molded SAFARILAMINATE? construction protects handgun and sights, Standard double leg strap and leg shroud with mounting holes for optional accessories. Right Hand to accommodate a Glock-17 Pistol with Light Attached, 20, EA; LI 008: Safariland Tactical Holster 6004-836-121 Features the SLS (Self Locking System) rotating hood system, SLS allows for a smoother, single-motion draw and greater protection against attempted weapon takeaways, Thermal-molded SAFARILAMINATE? construction protects handgun and sights, Standard double leg strap and leg shroud with mounting holes for optional accessories. Left Hand to accommodate a Glock-17 Pistol with Light Attached, 4, EA; LI 009: Blackhawk Tactical Light Pouches 39CL19FG hybrid design allows for either belt of molle, belt loop has hook and loop inside for lateral stability, fits belts up to 2.5" wide, Include speed Clip Funnel shape design hook and loop closure flap, 24, EA; LI 010: Three day assault pack - Constructed of heavy-duty 1000 denier nylon, Sleeping bag straps and padded shoulder, straps with D-rings for equipment attachment, Detachable, elasticized sternum strap with silent release buckle, Compartments are closed by durable YKK? zipper and sliders with silent pulls, Ventilating back panel and silent zipper pulls Dual side-detachable, padded waist belt, Reinforced drag/carry handle, Specifications: Dimensions (main comp.): 20?L x 13?W x 6?D, Dimensions (front comp.): 14.5?L x 12.5?W x 2.5?D, Cubes: 2000 cu. in. / 37 L, 24, EA; LI 011: Peltor Shooting Glasses protect against debris from particle discharges while shooting. Anti-fog, anti-static, anti-scratch wraparound lenses meet ANSI Z87.1 standards. Amber lenses sharpen visual acuity. Flat temples for wear with muffs. Blocks 99.9% UV rays, 24, PR; LI 012: ATAC A2 Light with Clip Holster - Aerospace Grade Aluminum, (2) AA Duracell? Batteries Included, Regulated Circuit for Maximum Output, Cree? XP-E LED, Gold Plated Contacts, Intelligent Switch w. High/Low/Strobe, Momentary-On Switch, Stamped Metal Pocket Clip, Black TPR Soft Touch Anti-Roll Ring, Break-Away Lanyard Included, Water Resistant Construction, 32, EA; LI 013: Century kick punch body shield. It is great for all levels of martial artists. Constructed with a tough 15 oz. nylon reinforced vinyl cover over dense compressed foam core. This shild has been used by top martialart schools for years, and contuines to be a customer favorite. When held properly you can practice virtually any striking technique. Two back handles, and one on each side.Your choice of Red, Black or New Blue. Shields Measure : 14-1/2 inches x 25 inches x 5 1/2 inches thick, 4, EA; LI 014: Protech Entry Two Ballistic Shield, Threat Level IIIA, 24" x 48" w/ 4" x 16" View Port, Black Curved design for maximum protection against angle shots. Meets N.I.J. 0108.01 Level IIIA standard. Multi-hit capability. Manufactured with advanced-composite, high-performance fiber, Dyneema? UD-HB25. 3 point multi-position ambidextrous handle. Allows you to more easily maneuver the shield at different angles. Longer use without fatigue. Ballistic polycarbonate 4" x 16" (10 x 41 cm) viewport with a unique four-layer, free-floating lens that eliminates spalling or crazing when hit. Viewport..., 4, EA; LI 015: Double Training Cuff, Standard length is 34" (86.36cm) 1/2" (1.27cm) wide beveled edges to reduce potential for subject injury Ample space for writing down subject information Tensile strength for more than 400lbs. (240kg) Two cuffs in one, which allows for quicker subject control 10 per pack, 60, PR; LI 016: Safariland Restraints Metal Disposable Handcuff, Cutter Safariland 8500-0 Cuff Cutter 8500-0-2, Can be used on any disposable restraint, 6, EA; LI 017: The BLACKHAWK! S.T.R.I.K.E. Double Pistol Mag Pouch Talon Flex (Speed Clip Version) features TalonFlex inserts to hold mag tightly, but allows for instant reloads and silent carry. 1000D Nylon, Holds one standard pistol magazine, Attaches to MOLLE style webbing using BLACKHAWK! Speed Clips for 9MM Glock-17, 24, EA; LI 018: BlackHawk S.T.R.I.K.E. M4 Magazine Pouch, Features: Holds (2) M16/M4 magazines or (1).308 magazines or (1) AK-47 magazine, With speed clipsDropleg, Belt Mounted Mounted M4A1 30 round Triple Magazine Pouch, 24, EA; LI 019: The SureFire X300 features a high-efficiency LED that generates 170 lumens of brilliant white light focused by a Total Internal Reflection (TIR) lens to produce a tight beam with good reach and significant surround light for peripheral vision. The LED has no filament to burn out or break and generates tactical-level light?enough to overwhelm an aggressor's night-adapted vision?for 2.4 hours per set of batteries. The high-strength aerospace aluminum body is Mil-Spec hard anodized for superior toughness and corrosion resistance, and is O-ring and gasket sealed to make it submersible to 22 meters. The X300 Rail-Lock system comes with adapter plates permitting rapid attachment to and removal from either Universal or Picatinny rails. An ambidextrous push/toggle switch provides one-finger operation for either momentary or constant-on operation. Optional pistol grip switches permit operation with the top grip finger, leaving the index finger free to operate the handgun trigger. Other switches are available for operating the X300 when attached to a long gun. Specifications and Features: Virtually indestructible LED regulated to maximize output and runtime Tactical-level output with TIR lens for close- to medium-range applications Quick-detach rail clamp Submersible to 22 meters Accepts optional pistol grip and long gun forend switches Construction?High-strength aerospace aluminum with Mil-Spec anodizing; impact-resistant polymer; coated tempered window Includes high-energy 123A batteries with 10-year shelf life Max Output: 170 Lumens Max Runtime: 2.4 Hours Length: 3.6" Width: 1.45" Bezel Diameter: 1" Weight with Batteries: 3.8 oz Batteries: 2 CR123A, 24, EA; LI 020: The M600C Scout Light? attaches by means of an integral thumbscrew clamp to long guns equipped with a Picatinny rail. Its small size increases weapon maneuverability, increases rail space available for other accessories, and minimizes added weight. It uses a high-efficiency LED emitter, virtually immune to failure since there's no filament to burn out or break, and a Total Internal Reflection (TIR) lens to create a beam with good reach and significant peripheral light for close- to medium-range applications. Maximum output is 200 lumens, and it produces tactical-level light?more than enough to temporarily overwhelm the night-adapted vision of an aggressor?for over two hours per set of batteries. The M600C has two switch options: (1) a pushbutton tailcap switch: press for momentary on, press further to click constant-on; (2) a momentary-on tape switch with a 7-inch cable that attaches to your preferred location via self-stick Velcro? backing. Constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance, and optically coated tempered glass for maximum light transmission, the M600C is O-ring sealed to keep out dust, dirt, and moisture. Battle-tested, built to withstand the rigors of combat. Available in Black or Desert Tan. Fits: Rifles, carbines, or submachine guns with a Picatinny rail on the forend. (See our Picatinny Rail Forends). Features Virtually indestructible LED regulated to maximize output and runtime Tactical-level output with TIR lens for close- to medium-range applications Switches?Momentary-on tape (7" cable), momentary/constant-on pushbutton Mounting system?Integral thumbscrew clamp for Picatinny rails Construction?High-strength aerospace aluminum with Mil-Spec anodizing; impact-resistant polymer; coated tempered window Weatherproof?O-ring and gasket sealed Available in Black or Desert Tan Includes high-energy 123A batteries with 10-year shelf life, 24, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If Seller is bidding Cisco brand equipment, Seller certifies that it is a Cisco Authorized Channel as of the date of the submission of its Bid, and that it has the certification/specialization level required by Cisco to support both the product sale and product pricing, in accordance with applicable Cisco certification/specialization requirements.Unless otherwise specified, Seller warrants that the products are new and in their original box(es). The Seller confirms to have sourced all Cisco products submitted in this Bid from Cisco or through Cisco Authorized Channels only, in accordance with all applicable laws and Cisco?s current applicable policies at the time of purchase. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all Cisco software is licensed originally to Buyer as the original licensee authorized to use the Cisco Software. New Equipment ONLY;NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 90 calendar days after close of Buy Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines.Information can be found at www.sam.gov. Delivery must be made within 60 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 60 - required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Buyer will review the bids and make a selection on FedBid. Selected Seller means the Seller that submits the Selected Bid. Selected Bid means a Bid submitted by a Seller in response to an IFB, which Bid meets or exceeds the Buyer�s requirements and is accepted by the Buyer pursuant to the terms of the Bid. Participating sellers will note that there may be a 4 to 6 week delay from the time that the Selected Seller receives notification from FedBid to the time that the Selected Seller receives the award document from the Department of State. FedBid will invoice the Selected Seller after the Buyer has accepted a Seller�s bid. The FedBid invoice will include system-generated competition-specific information for identification and referencing purposes. The Selected Seller is responsible for remitting any FedBid fee once they have received payment from the Department of State. The official award document from the Department of State will contain information on how the Selected Seller invoices the Buyer. The official award document from the Department of State will provide the delivery timeline information and the award date on the document is when the official delivery time clock begins. Sellers cannot: combine order shipments, perform drop shipments. A requisition number or credit card number MUST be identified with the shipment and All shipments MUST include the Packing List. For the line items designated as [Brand Name or Equal], the Buyer is allowing Sellers to submit bids for alternate products as long as the bid specification 'Brand Name or Equal' the requested specification. Sellers MUST enter exactly what they are bidding (including make, model, and description) into the blank description field in order for the bid to be considered. Award may NOT be based solely on pricing factors alone. Consideration may be given to non-price related factors to include delivery, history, urgency of need, as well as price. Award of bids will be evaluated by price, technical capability, delivery and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. TO HAVE A BID CONSIDERED FOR AWARD FOR BRAND NAME OR EQUAL & MEET OR EXCEED BUYS, ALL VENDORS MUST PROVIDE MANUFACTURER, PART # AND EXTENDED SPECIFICATIONS OF THE EXACT MODEL BEING PROPOSED FOR ALL LINE ITEMS. NO EXCEPTIONS. FAILURE TO PROVIDE THIS INFORMATION WILL RESULT IN A 'NON RESPONSIVE' BID AND REMOVAL FROM AWARD CONSIDERATION. The Government intends to make award to the responsive offeror that provides the Best Value to the Government based on Technical Acceptability, Price, Delivery Timeframe and Past Performance. Award will be made to the offeror quoting fair and reasonable prices who meet ALL required technical specifications and who comply with ALL solicitation requirements. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:Technical Compliance with Solicitation, Delivery and Warranty Information, Past Performance,and Price, Technical and past performance, when combined, are more important than price. The Government may increase the quantity of supplies called for in the Schedule at the unit price specified. The Contracting Officer may exercise the option by written notice to the Contractor within 90 Calendar Days of receiving final delivery. Delivery of the added items shall continue at the same rate as the like items called for under the contract, unless the parties otherwise agree
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM/PR2436729/listing.html)
 

Place of Performance

Address: Sterling, VA 20166

Zip Code: 20166
 

Record

SN03100092-W 20130628/130626234938-d33ed678e0920e92a405878c7d8fa619 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |