SOLICITATION NOTICE
10 -- IQC on SLING, SMALL ARMS
- Notice Date
- 7/10/2013
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPM7MX-13-X-0178
- Point of Contact
- Sunshine Brubaker, Phone: 6146925890
- E-Mail Address
-
sunshine.brubaker@dla.mil
(sunshine.brubaker@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- NSN(s): 1005-01-562-9457 Item Description: SLING, SMALL ARMS Estimated Annual Quantity: 32,669 Unit of Issue: EA Destination Information: VARIOUS DLA STOCKING LOCATIONS Delivery Schedule: 90 days CAGE & Part Number: ( 1VJU0) P/N: 100350301 (39EH3) P/N 8342 ( X ) This acquisition is to establish an IDPO for NSN 1005-01-562-9457. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (3 year base plus option years) shall not exceed 5 years. ( X ) While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance as described in the solicitation. Hard copies are not available. Increments and delivery schedule will be noted on the RFQ. FOB Destination is required. Inspection/Acceptance requirements are Destination. The Small Business size standard is 500 employees. The proposed contract is 100% set aside for small business concerns. If you are interested in providing a quote, email Sunshine Brubaker at Sunshine.Brubaker@DLA.MIL or call (614) 692-5890. The item description for the item is below: DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS SOLICITATION, THEREFORE SURPLUS MATERIAL WILL NOT BE CONSIDERED. IF PRESENT IN THE SOLICITATION, PROVISION 52.211-9003 AND CLAUSE 52.211-9000 ARE NOT APPLICABLE. END ITEM: M16 / M4 Family THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2779). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC) REGISTRATION WHEN REQUESTED WILL RESULT IN WITHDRAWAL OF QUOTES/OFFERS. ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. _______________EXCEPTION DATA___________________ THE TDP DOES NOT FULLY DISCLOSE THE COMPLETE TECHNICAL REQUIEMENTS THAT WOULD ALLOW THIS ITEM TO BE MANUFACTURED BY OTHER THAN THE FOLLOWING SOURCE(S): BEST MADE DESIGNS, LLC P.O. BOX 475 MONAHANS, TX 79756 CAGE: 1VJU0 FIRE FORCE TACTICAL GEAR 122-A E. FOOTHILL BLVD., UNIT #9 ARCADIA, CA 91006 CAGE: 39EH3 _____________END OF EXCEPTIONS_________________ THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." BEST MADE DESIGNS LLC (1VJU0) P/N 100350301 FIRE FORCE TACTICAL GEAR, INC. (39EH3) P/N 8342 I/A/W DRAWING NR 19200 12579607 REFNO AMEND NR C DTD 08/04/09 TYPE NUMBER I/A/W DRAWING NR 19200 12993884 REFNO AMEND NR F DTD 08/15/12 TYPE NUMBER I/A/W DRAWING NR 19200 13014775 BASIC AMEND NR B DTD 08/28/12 TYPE NUMBER I/A/W DRAWING NR 19200 13014775 REFNO AMEND NR DTD 11/06/12 TYPE NUMBER I/A/W SPEC NR 19200 13014775 REFNO AMEND NR B DTD 08/28/12 TYPE NUMBER I/A/W DRAWING NR 19200 PRF13018850 REFNO AMEND NR DTD 10/11/07 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPM7MX-13-X-0178/listing.html)
- Record
- SN03113051-W 20130712/130710235915-269d63ff900a676af5db232e25f118b0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |