SOLICITATION NOTICE
49 -- Valve Body Test Stand
- Notice Date
- 7/11/2013
- Notice Type
- Presolicitation
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Army, National Guard Bureau, USPFO for Indiana, 2002 South Holt Road, Indianapolis, Indiana, 46241-4839
- ZIP Code
- 46241-4839
- Solicitation Number
- W912L9-13-T-0043
- Archive Date
- 8/9/2013
- Point of Contact
- Kelly Cooper, Phone: 3172473312
- E-Mail Address
-
kelly.a.cooper10.ctr@mail.mil
(kelly.a.cooper10.ctr@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- DESCRIPTION 1 QTY - Valve Body Test Stand DESCRIPTION • Up to 6;9 gpm of flow and 600 psi ~- • Adjustable main pressure regulator maintains pressure to components under test. • Governor pressure regulator valve included • Simulate full or closed throttle position with hydraulic modulator control. • Seventeen industrial grade pressure gauges for system and clutch pressure indication. • Indicator lights for clutch pressure activation • 0-15 GPM (57 Umin) digital flow meter. ·Oil reservoir with 10 gallon (37.8 L) capacity, visual sight gauge and 10 micron filtration. • Immersion oil heater with digital temperature controller and display. • Quick-change valve body adapters made from precision ground steel available for most transmission models. • Pre-wired for 240 Volt 30 amp single phase electrical with safety disconnect Electronic Valve Body Adapter Kits: Adapter Kit for 1000/2000 series • Adapter plate is used to test pre-Generation 4 and Generation 4 valve bodies Adapter Kit for MD series • Adapter plate used for WTEC and Generation 4 3000 series. Adapter Kit HD series • Adapter plate is used for WTEC and Generation 4 4000 series. Plumbing kit for MD/HD valve bodies (required) • Accessory used to mount manifold of vertical stand to test stand's mounting plate Electronic Shifting Transmissions: Electronic Shifting Control Panel • One kit required regardless of number of electronic shift kits ordered. • Not used on ATEC or 400/3L80 kit Electronic Shifting for Pre-Generation 41000/2000 series • Requires P/N 535414.01 Shift Panel Electronic Shifting for Allison WTEC 111111 3000/4000 series Electronic Shifting for Generation 41000/2000 series • Requires P/N Shift Panel Electronic Shifting for Generation 4 3000/4000 series • Requires P/N 535414.01 Shift Panel Electronic Shifting for ATEC Electronic Valve Body Adapter Kits for GM Transmissions Adapter Kit for Hydra-matic 4L80E • Adapter plate used for THM 400 and 4L80E Electronic Shifting for Hydra-matic 4L80E (requires Adapter Kit for HT700 series and MT600 Series· ATEC Shifting Required • Kit for A TEC Series valve bodies. • MT, MTB 648, HT(B)741 (2 & 3 gear}, HT 746, HT 748, HT 755 DR (2 and 3 gear), HT(B) 755 CR (2 and 3 gear) and CL T(B) 755 (2 & 3 gear) & HT/CL T 700. Mechanical Valve Body Kits For Allison Transmissions Adapter kit for AT, MT, HT, and V730: • AT500, AT543, AT545, MT30, MT31, MT40, MT41, MT42 • MT640, MT643, MT644, MT650, MT653, MT654,MT 654CR HT740, • HT 740D, HT 740FS, HT 754, V730 Mechanical Valve Bodv Kits continued: Adapter Kit for AT, MT and V730 • Manifold and plumbing for the following AT, MT and V730 series transmissions • AT500, AT543, AT545, MT30, MT31, MT40, MT41, MT42 • MT640, MT643, MT644, MT650, MT653, MT654,MT 654CR HT740, V730 Adapter Kit for HT740 and CLBT750 (Requires 22K2000-B) ·Adapter Plate for HT-700 Series transmissions • Requires 22K2000-B • HT 740D, HT 740FS Adapter kit for MT 30, 40, 41, 42, TX200 Adapter Kit for CDB50 Adapter Kitfor V731, V731RH, VR731 & VR731H • ATEC Shifting Required Adapter KitforTX100, TX100-1, TX100-1A Solenoid Valve Tester for ATEC and Allison off-highway solenoid valves • Any 12V or 24V (Requires 2281527 -B for completion) Not for WT solenoids Solenoid Valve Test Mounting Fixture Accessories/Governor Test Kits: Governor Drive Fixture • Optional governor tester for most mechanical valve bodies. Includes fingertip control and a digital tachometer. MTB Governor Drive Fixture Kit Governor Test Plate only- plate blocks manifold for governor testing (For nylon governors only) Spare Parts Kit for 255 Valve Body Test Stand (For machines without Governor drive) • Kit includes: Replacement gauges, filter kit(22k1835), Digital Temperature controller, suction strainer, pump coupling insert, and spare drive belt Spare Parts Kit for 255 Valve Body Test Stand (For machines with Governor drive) • Kit includes: Replacement gauges, filter kit (22K1835), Digital Temperature controller, suction strainer, pump coupling insert, and spare drive belt. Replacement Filter Two (2) days on-site training. Will provide a factory representative on-site to provide commissioning and training for two work-days.All travel, lodging and meal expenses are included. Additional days, if needed or requested, will be billed at daily service rate and expenses Class size should be limited to no more than 4 people to be most effective. F.O.B. Destination Name Brand or equal to
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA12/W912L9-13-T-0043/listing.html)
- Place of Performance
- Address: 4150 W. Minnesota Street, Indianapolis, Indiana, 46241, United States
- Zip Code: 46241
- Zip Code: 46241
- Record
- SN03113688-W 20130713/130711235049-f6bcfe6a6fe440c3aa727a810fcbe3d5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |