Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 17, 2013 FBO #4253
DOCUMENT

65 -- Synthes MatrixCombo Plating Sets - Attachment

Notice Date

7/15/2013
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 8 (248);Room 315, Bldg. 2;10,000 Bay Pines Blvd;Bay Pines FL 33744
 

ZIP Code

33744
 

Solicitation Number

VA24813Q2148
 

Response Due

7/31/2013
 

Archive Date

9/29/2013
 

Point of Contact

Reginald L. Nettles
 

E-Mail Address

ld.Nettles2@va.gov<br
 

Small Business Set-Aside

N/A
 

Description

Salient Characteristics For Craniofacial and Mandibular Trauma and Reconstruction Sets 2 combination plating sets with implants and instruments with the following salient characteristics, each set in a single graphic case: "Facilitates treatment of panfacial fractures "Eliminates need to pull separate sets to treat mandible and midface cases "Modular system allows set to be configured per surgeon and hospital needs "Side-loading graphic case for complete set visibility "One screw diameter and one blade works with all plates for the midface system-1.55mm "Preformed Orbital plates (small and large) 0.4mm thick with contoured edges for easier plate insertion "Self-retaining screws/blades that reduce cam-out "Self-drilling threaded reduction tool for zygomatic arch fractures "Articulating plate introducer which allows for access to the sub condylar ramus inter orally "Pre formed mandible plates which saves time in the operating room and reduces the number of bends required to fit the plate "All screws work with all plates within each system "One screwdriver blade for all screws within each system "Color-coding by strength for easy identification "Reduced plate screw profile, where applicable "Rounded edges on plates "Standardized instrumentation "Preformed three-dimensional shape Each Set shall contain the following items: 102.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 5MM 102.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 6MM 102.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 8MM 102.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 10MM 102.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 12MM 52.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 14MM 52.0MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 16MM 102.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 5MM 102.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 6MM 102.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 8MM 102.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 10MM 102.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 12MM 52.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 14MM 52.0MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 16MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 5MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 6MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 8MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 10MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 12MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 14MM 62.4MM TI MATRIXMANDIBLE SCREW SELF-TAPPING 16MM 62.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 8MM 102.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 10MM 102.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 12MM 102.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 14MM 52.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 16MM 52.4MM TI MATRIXMANDIBLE LOCKING SCREW SLF-TPNG 18MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 5MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 6MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 8MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 10MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 12MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 14MM 22.7MM TI MATRIXMANDIBLE EMERGENCY SCREW SLF-TPNG 16MM 1MATRIXMANDIBLE MINI PL-TENSION BAND BRD/2X2H/MALLEABLE/1.0MM 1MATRIXMANDIBLE MINI PL-TENSION BAND BRD/2X3H/MALLEABLE/1.0MM 1MATRIXMANDIBLE MINI PL-TENSION BAND BRD/3X3H/MALLEABLE/1.0MM 1MATRIXMANDIBLE MINI PL-TENSION BAND NRW/2X2H/MALLEABLE/1.0MM 1MATRIXMANDIBLE MINI PL-TENSION BAND NRW/3X3H/MALLEABLE/1.0MM 1TI MATRIXMANDIBLE 4 HOLE BOX PL MALLEABLE 1.0MM THICK 1TI MATRIXMANDIBLE 8 HOLE STRUT PL MALLEABLE 1.0MM THICK 1TI MATRIXMANDIBLE 8H STRUT PL CURVED/MALLEABLE/1.0MM THICK 1MATRIXMANDIBLE PRE-BNT TENSION BAND PL/RIGHT/2X2H/1.0MM THK 1MATRIXMANDIBLE PRE-BNT TENSION BAND PLATE/LEFT/2X2H/1.0MM THK 1TI MATRIXMANDIBLE 2X2 HOLE CRESCENT PL 2.0MM THK/BRD 1TI MATRIXMANDIBLE 3X3 HOLE CRESCENT PL 2.0MM THK/BRD 1TI MATRIXMANDIBLE 6H PLATE 2.0MM THICK 1TI MATRIXMANDIBLE 12 HOLE PLATE 2.0MM THICK 1TI MATRIXMANDIBLE 3X3 HOLE ANGLE PLATE 2.0MM THICK/BROAD 1TI MATRIXMANDIBLE 20 HOLE RECON PLATE 2.5MM THICK 1TI MATRIXMANDIBLE 7X23 ANGLE RECON PL LEFT 2.5MM THICK 1TI MATRIXMANDIBLE 7X23 ANGLE RECON PL RIGHT 2.5MM THICK 10TI MATRIXMIDFACE SCREW SELF-DRILLING 3MM 20TI MATRIXMIDFACE SCREW SELF-DRILLING 4MM 20TI MATRIXMIDFACE SCREW SELF-DRILLING 5MM 20TI MATRIXMIDFACE SCREW SELF-DRILLING 6MM 5TI MATRIXMIDFACE SCREW SELF-DRILLING 8MM 5TI MATRIXMIDFACE SCREW SELF-TAPPING 10MM 5TI MATRIXMIDFACE SCREW SELF-TAPPING 12MM 2TI MATRIXMIDFACE EMERGENCY SCREW 3MM 4TI MATRIXMIDFACE EMERGENCY SCREW 4MM 4TI MATRIXMIDFACE EMERGENCY SCREW 5MM 4TI MATRIXMIDFACE EMERGENCY SCREW 6MM 2TI MATRIXMIDFACE EMERGENCY SCREW 8MM 2TI MATRIXMIDFACE EMERGENCY SCREW 10MM 2TI MATRIXMIDFACE EMERGENCY SCREW 12MM 1TI MATRIXNEURO CONTOUR MESH 38MM X 45MM/0.4MM MALLEABLE 1TI MATRIXNEURO CONTOUR MESH 38MM X 45MM/0.4MM RIGID 2TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC SMALL/0.3MM THK 2TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC MED/0.3MM THICK 2TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC LARGE/0.3MM THK 2TI MATRIXMIDFACE ORBITAL MESH PLATE/0.3MM THICK 1TI MATRIXMIDFACE PREFORMED ORBITAL PLATE SMALL/LEFT 1TI MATRIXMIDFACE PREFORMED ORBITAL PLATE LARGE/LEFT 1TI MATRIXMIDFACE PREFORMED ORBITAL PLATE SMALL/RIGHT 1TI MATRIXMIDFACE PREFORMED ORBITAL PLATE LARGE/RIGHT 1TI MATRIXMIDFACE H-PLATE 11 HOLES/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-LEFT/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-RIGHT/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-LEFT/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-RIGHT/0.5MM THICK 1TI MATRIXMIDFACE T-PLATE 3X4 HOLES/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-LEFT/0.5MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-RIGHT/0.5MM THICK 3TI MATRIXMIDFACE ORBITAL RIM PLATE/12 HOLES/0.5MM THICK 3TI MATRIXMIDFACE ADAPTION PLATE/20 HOLES/0.5MM THICK 1TI MATRIXMIDFACE Y-PLATE 1X3 HOLES/0.5MM THICK 1TI MATRIXMIDFACE DOUBLE Y-PL 6 HOLES/0.5MM THICK 1TI MATRIXMIDFACE BOX PLATE 4 HOLES/5MMX10MM/0.5MM THICK 1TI MATRIXMIDFACE BOX PLATE 4 HOLES/10MMX10MM/0.5MM THICK 1TI MATRIXMIDFACE X-PLATE 4 HOLES/0.5MM THICK 1TI MATRIXMIDFACE STRUT PLATE 18 HOLES/0.5MM THICK 1TI MATRIXMIDFACE H-PLATE 11 HOLES/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-LEFT/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-RIGHT/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-LEFT/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-RIGHT/0.7MM THICK 1TI MATRIXMIDFACE T-PLATE 3X4 HOLES/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-LEFT/0.7MM THICK 3TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-RIGHT/0.7MM THICK 3TI MATRIXMIDFACE ORBITAL RIM PLATE/12 HOLES/0.7MM THICK 3TI MATRIXMIDFACE ADAPTION PLATE/20 HOLES/0.7MM THICK 1TI MATRIXMIDFACE Y-PLATE 1X3 HOLES/0.7MM THICK 1TI MATRIXMIDFACE DOUBLE Y-PL 6 HOLES/0.7MM THICK 1TI MATRIXMIDFACE BOX PLATE 4 HOLES/5MMX10MM/0.7MM THICK 1TI MATRIXMIDFACE BOX PLATE 4 HOLES/10MMX10MM/0.7MM THICK 1TI MATRIXMIDFACE X-PLATE 4 HOLES/0.7MM THICK 1TI MATRIXMIDFACE STRUT PLATE 18 HOLES/0.7MM THICK 102.0MM IMF SCREW SELF-DRILLING 8MM 102.0MM IMF SCREW SELF-DRILLING 12MM 20.6MM PRECUT CERCLAGE WIRE 175MM 2TI MATRIXMANDIBLE 20H PLATE 2.0MM THICK 2TI MATRIXMANDIBLE 12 HOLE RECON PLATE 2.5MM THICK 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/4MM STOP/50MM 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/6MM STOP/50MM 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/8MM STOP/50MM 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH W/12MM STOP/50MM 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH/90MM FOR 03.503.043 2MATRIXMANDIBLE 1.5MM DRILL BIT J-LATCH FOR 03.503.045/.047 1MATRIXMANDIBLE 1.5MM THREADED DRILL GUIDE-SHORT 1MATRIXMANDIBLE COMBINATION BENDER 1MATRIXMANDIBLE PLATE BENDING IRON-LEFT 1MATRIXMANDIBLE PLATE BENDING IRON-RIGHT 2MATRIXMANDIBLE SHORT CUT PLATE CUTTER 1MATRIXMANDIBLE SMALL PLATE CUTTER 1UNIVERSAL TROCAR HANDLE 12.0MM CANNULA & OBTURATOR 1MALLEABLE C-RETRACTOR 12.0MM CHEEK RETRACTOR BLADE 12.0MM CHEEK RETRACTOR RING 1MATRIXMANDIBLE TROCAR DRILL GUIDE FOR 397.213 1MATRIXMANDIBLE THREADED TROCAR DRILL GUIDE FOR 397.213 1BONE REDUCTION FORCEPS-LARGE 1BONE REDUCTION FORCEPS-SMALL 1BONE REDUCTION FORCEPS SMALL STRAIGHT 1MATRIXMANDIBLE DEPTH GAUGE 1MATRIXMANDIBLE PLATE INTRODUCING FORCEPS 2MATRIXMANDIBLE 1.8MM DRILL BIT J-LATCH/90MM FOR 03.503.044 2MATRIXMANDIBLE 1.8MM DRILL BIT J-LATCH FOR 03.503.045/.047 1MATRIXMANDIBLE 1.8MM THREADED DRILL GUIDE-SHORT 1MATRIXMANDIBLE BENDNG TEMPLATE FOR NARROW TENSION BAND PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/1.0MM BROAD TENSION BAND PL 1MATRIXMANDIBLE BENDNG TEMPLATE F/1.0MM THICK ADAPTION PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM BROAD CRESCENT PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM THICK STRAIGHT PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/2.0MM BROAD 3X3 ANGLE PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/2.5/2.8MM ANGLE RECON PLATES 1MATRIXMANDIBLE BENDNG TEMPLATE F/2.5/2.8MM STRAIGHT RECON PL 2MATRIXMIDFACE SCREWDRIVER BLD HEX COUPLING/SELF-RETAIN/76MM 2MATRIX 1.1MM DRILL BIT J-LATCH/4MM STOP/44.5MM 2MATRIX 1.1MM DRILL BIT J-LATCH/6MM STOP/44.5MM 2MATRIX 1.1MM DRILL BIT J-LATCH/8MM STOP/44.5MM 2MATRIXMIDFACE 1.25MM DRILL BIT J-LATCH/10MM STOP/44.5MM 2MATRIXMIDFACE 1.25MM DRILL BIT J-LATCH/12MM STOP/44.5MM 1IN-PLANE BENDER FOR MATRIXMIDFACE PLATES 2PLATE BENDER FOR MIDFACE PLATES 1MESH CUTTING SCISSORS LONG NOSE 1PLATE CUTTER FOR MIDFACE PLATES 12.4MM DRILL GUIDE 12.4MM DRILL BIT STRYKER J-LATCH/75MM 1ORBITAL RETRACTOR LEFT 1ORBITAL RETRACTOR RIGHT 1PLATE HOLDER FOR REVERSIBLE MATRIX PLATES 2RATCHETING SCREWDRIVER HANDLE 2SCREWDRIVER HANDLE WITH HEX COUPLING-MEDIUM 1MINI PLATE HOLDER LONG 1GRAPHIC CASE FOR MATRIXCOMBO SET 1INSTR TRAY F/GRAPHIC CASE MATRIXCOMBO/GENERAL INSTRUMENT 1INSTR TRAY F/GRAPHIC CASE MATRIXCOMBO/MANDIBLE INSTR 1INSERT TRAY F/TROCAR INSTR FOR MATRIXMANDIBLE SYSTEM 1INSERT TRAY F/BENDING INSTR FOR MATRIXMANDIBLE SYSTEM 1MATRIX AUXILIARY MODULE/LARGE FOR MATRIXMANDIBLE SYSTEM 1GENERIC SCREW INSERT TRAY FOR MATRIXMANDIBLE SYSTEM 1INSERT F/1.0MM MALLEABLE PLATE FOR MATRIXMANDIBLE SYSTEM 1INSERT TRAY F/1.0MM PLATES FOR MATRIXMANDIBLE SYSTEM 1INSERT TRAY F/1.25MM PLATES FOR MATRIXMANDIBLE SYSTEM 1INSERT TRAY F/1.5MM PLATES FOR MATRIXMANDIBLE SYSTEM 1INSERT TRAY F/2.0MM PLATES FOR MATRIXMANDIBLE SYSTEM 1MATRIX AUX INSERT TRAY/MED MANDIBLE/MIDFACE/ORTHOGNATHIC 1MATRIX AUXILIARY MODULE/SMALL MANDIBLE/MIDFACE/ORTHOGNATHIC 1INSERT F/2.0MM-2.8MM RECON PL FOR MATRIXMANDIBLE SYSTEM 8MATRIXMANDIBLE BENDING INSERT 1BENDING INSERT HOLDER FOR 03.503.080 1MATRIX AUXILIARY MODULE/MEDIUM FOR MATRIXMIDFACE SYSTEM 20.5MM/0.7MM PLATE INSERT/HALF HEIGHT F/MATRIXMIDFACE SYSTEM 1PLATE INSERT FOR MATRIXMIDFACE GENERIC MODULE 1ORBITAL PLATE AND MESH INSERT FOR MATRIXMIDFACE SYSTEM 1LABEL SHEET FOR SCREW MODULE FOR MATRIXMANDIBLE SYSTEM 1LABEL SHEET LARGE PLATE MODULE FOR MATRIXMANDIBLE SYSTEM 1LABEL SHEET FOR 306.731 MATRIXMANDIBLE INSTRUMENTS 1LABEL SHEET FOR 306.732 MATRIXMANDIBLE INSTRUMENTS 1LABEL SHEET FOR 306.733 MATRIXMANDIBLE INSTRUMENTS 1STRENGTH GRADIENT LABEL SHEET MATRIXMANDIBLE SYSTEM 1SCREW LENGTH LABEL SHEET FOR CALIBRATED DRILL BITS 1LABEL SHEET SMALL PL INSERT FOR MATRIXMANDIBLE SYSTEM 1LABEL SHEET FOR MATRIXNEURO MODULE 1LABEL SHEET FOR DRILLS/BLADES MATRIXMIDFACE SYSTEM 1LABEL SHEET F/MODULE 306.610 MATRXMAND/MIDFACE/ORTHOGNATHIC 1LABEL SHEET FOR 0.5MM PLATES MATRIXMIDFACE SYSTEM 1LABEL SHEET FOR SCREWS MATRIXMIDFACE SYSTEM 1LABEL SHEET FOR 0.7MM PLATES MATRIXMIDFACE SYSTEM 1LABEL SHEET FOR MATRIX SYSTEM STRENGTH GRADIENTS 1LABEL SHEET FOR ORBITAL PLATES MATRIXMIDFACE SYSTEM 1SCREW LENGTH MARKER-4MM 5SCREW LENGTH MARKER FOR 4MM SELF-DRILLING SCREWS 1SCREW LENGTH MARKER-5MM 5SCREW LENGTH MARKER FOR 5MM SELF-DRILLING SCREWS 1SCREW LENGTH MARKER-6MM 5SCREW LENGTH MARKER FOR 6MM SELF-DRILLING SCREWS 1SCREW LENGTH MARKER-8MM 2SCREW LENGTH MARKER FOR 8MM SELF-DRILLING SCREWS 1SCREW LENGTH MARKER-10MM 1SCREW LENGTH MARKER-12MM 1SCREW LENGTH MARKER-14MM 1SCREW LENGTH MARKER-16MM 1SCREW LENGTH MARKER-18MM 1SCREW LENGTH MARKER-20MM 1SCREW LENGTH MARKER-22MM 1SCREW LENGTH MARKER-24MM 1SCREW LENGTH MARKER 26MM 1SCREW LENGTH MARKER 28MM 1SCREW LENGTH MARKER 30MM 1SCREW LENGTH MARKER 32MM 1SCREW LENGTH MARKER 34MM 1SCREW LENGTH MARKER 36MM 1SCREW LENGTH MARKER 38MM 1SCREW LENGTH MARKER 40MM 21.5MM DRILL BIT/STRYKER J-LTCH WITH 8MM STOP/44.5MM 21.5MM DRILL BIT/STRYKER J-LTCH WITH 12MM STOP/44.5MM 1IMF SCREW MODULE/MINI MATRIXMANDIBLE SYSTEM 22.4/3.0MM CRUCIFORM SCRWDRVR BLADE WITH HEX COUPLING 2HOLDING SLEEVE 1SCR/DRILL/BLD INSERT W/RECESS HOLES F/MATRIXMIDFACE SYSTEM 1PLASTIC CUP W/LID FOR ELASTOMERIC INSERTS 1SCREW LENGTH MARKER FOR 3MM SELF-DRILLING SCREWS 12.0/2.4MM UNIV DRILL GUIDE 1PLATE HOLDING FORCEPS W/BALL 1LABEL SHEET FOR PREFORMED ORBITAL PLATES-MATRIXMIDFACE 1LABEL SHEET FOR IMF MODULE MATRIXMANDIBLE SYSTEM Evaluation Criteria: 1. Technical Capability and Subfactors: (a). Used for treatment of Craniofacial and Mandibular trauma and reconstruction. (b). Craniofacial and Mandibular modules contained in a single graphic case for easier use in the operating room and easier accessibility. (c). The set contains all components identified in the salient characteristics. (d). Components shall be compatible with current and previous Synthes Matrix Sets. 2. Price. Technical is significantly more important than price. Any subfactors rated as unacceptable is reason for quotes to be rejected. Equals shall have certified proof via medical board or FDA of "equal" testing and approval.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BPVAMC/VAMCCO80220/VA24813Q2148/listing.html)
 

Document(s)

Attachment
 

File Name: VA248-13-Q-2148 VA248-13-Q-2148_2.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=871940&FileName=VA248-13-Q-2148-001.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=871940&FileName=VA248-13-Q-2148-001.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Department of Veterans Affairs;Bay Pines HCS;10000 Bay Pines Blvd;Bay Pines, FL

Zip Code: 33744
 

Record

SN03116043-W 20130717/130715234339-d46cccde635adcf639127ab73f97e469 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |