SOLICITATION NOTICE
66 -- ACOUSTIC WATER LEVEL MEASURING EQUIPMENT
- Notice Date
- 7/24/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- NORFOLK FEDERAL BUILDING, NORFOLK, VA 23510
- ZIP Code
- 23510
- Solicitation Number
- NCNT1000-13-01297
- Response Due
- 8/2/2013
- Archive Date
- 1/29/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is NCNT1000-13-01297 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-68. The associated North American Industrial Classification System (NAICS) code for this procurement is 334513 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-08-02 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be CHESAPEAKE, VA 23320 The National Oceanic & Atmospheric Administration requires the following items, Exact Match Only, to the following: LI 001: Model Number: 3003-XCR-4 Aquatrak Model 3000 Transducer, top mounted bulkhead water proof connecter, calibrated to 4 feet ALL SHIPPING WILL BE PAID BY THE BUYERS UPS ACCOUNT, 18, EA; LI 002: Model Number: 4110-MC-02 Aquatrak Model 4110 Micro-comp, Controller with Version 4.XX firmware. Built in 2.5 foot SDI-12/Power and Transducer I/O Cables., 8, EA; LI 003: Model Number: 28-3000-64 Aquatrak Installation kit, 4 range tubes (5 ft) with couplings, one trim tube (5 ft), one red brass section (3 ft), one aluminum miter block and one shipping box, 4 inch, and five centering clips type 316, 4 inch, with calibration tube, 6, EA; LI 004: Model Number: 28-3000-66 Aquatrak Installation kit, 4 range tubes (5 ft) with couplings, one trim tube (5 ft), one red brass section (3 ft), one aluminum miter block and one shipping box, 6 inch, and five centering clips type 316, 6 inch, with calibration tube, 12, EA; LI 005: Model Number: W-108-02-40 Aquatrak Cable (Belden 8425), 40 foot with Impluse connector P/N MCIL-5-FS + MCDLS/F, bare wire at other end., 8, EA; LI 006: Model Number: W-108-02-80 Aquatrak Cable (Belden 8425), 80 foot with Impluse connector P/N MCIL-5-FS + MCDLS/F, bare wire at other end., 7, EA; LI 007: Model Number: W-108-02-200 Aquatrak Cable (Belden 8425), 200 foot with Impluse connector P/N MCIL-5-FS + MCDLS/F, bare wire at other end., 3, EA; LI 008: Model Number: 28-3001-NG-4 Aquatrak Calibration Tube Assembly, with S.S. Clamp, 4 feet. High Precision. BEI 208, 36, EA; LI 009: Model Number: 8000-PWB-6 Aquatrak Bottom Assembly, 6 inch, including one 6 inch Brass cone, two 18 inch Copper parallel plates, 6" Threaded female coupling, four spacers, 24" copper sleeve, and assembly hardware, 12, EA; LI 010: Model Number: 8000-PWB-4 Aquatrak Bottom Assembly, 4 inch, including one 4 inch Brass cone, one 24 Inch Sleeve, 13.5 inch Brass parallel plates, 4" Threaded female coupling, four spacers, and assembly hardware, 8, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Oceanic & Atmospheric Administration intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Oceanic & Atmospheric Administration is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Contracting Officer's Authority. The Contracting Officer is the only person authorized to make or approve any changes in any of the requirements of this contract, and, notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely in the Contracting Officer. In the event the contractor makes any changes at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract terms and conditions, including price. Insert the clause 1352.209?73, Compliance with the Laws, in all solicitations and contracts. As prescribed in 48 CFR 1309.507?2(c), insert the following clause: Compliance With the Laws (APR 2010) The contractor shall comply with all applicable laws, rules and regulations which deal with or relate to performance in accord with the terms of the contract. As prescribed in 48 CFR 1309.507?2(d), insert the following clause: Organizational Conflict of Interest (APR 2010) (a) Purpose. The purpose of this clause is to ensure that the contractor and its subcontractors: (1) Are not biased because of their financial, contractual, organizational, or other interests which relate to the work under this contract, and (2) Do not obtain any unfair competitive advantage over other parties by virtue of their performance of this contract. (b) Scope. The restrictions described herein shall apply to performance or participation by the contractor, its parents, affiliates, divisions and subsidiaries, and successors in interest (hereinafter collectively referred to as ?contractor?) in the activities covered by this clause as a prime contractor, subcontractor, co-sponsor, joint venturer, consultant, or in any similar capacity. For the purpose of this clause, affiliation occurs when a business concern is controlled by or has the power to control another or when a third party has the power to control both. (c) Warrant and Disclosure. The warrant and disclosure requirements of this paragraph apply with full force to both the contractor and all subcontractors. The contractor warrants that, to the best of the contractor's knowledge and belief, there are no relevant facts or circumstances which would give rise to an organizational conflict of interest, as defined in FAR Subpart 9.5, and that the contractor has disclosed all relevant information regarding any actual or potential conflict. The contractor agrees it shall make an immediate and full disclosure, in writing, to the Contracting Officer of any potential or actual organizational conflict of interest or the existence of any facts that may cause a reasonably prudent person to question the contractor's impartiality because of the appearance or existence of bias or an unfair competitive advantage. Such disclosure shall include a description of the actions the contractor has taken or proposes to take in order to avoid, neutralize, or mitigate any resulting conflict of interest. (d) Remedies. The Contracting Officer may terminate this contract for convenience, in whole or in part, if the Contracting Officer deems such termination necessary to avoid, neutralize or mitigate an actual or apparent organizational conflict of interest. If the contractor fails to disclose facts pertaining to the existence of a potential or actual organizational conflict of interest or misrepresents relevant information to the Contracting Officer, the Government may terminate the contract for default, suspend or debar the contractor from Government contracting, or pursue such other remedies as may be permitted by law or this contract. (e) Subcontracts. The contractor shall include a clause substantially similar to this clause, including paragraphs (f) and (g), in any subcontract or consultant agreement at any tier expected to exceed the simplified acquisition threshold. The terms ?contract,? ?contractor,? and ?Contracting Officer? shall be appropriately modified to preserve the Government's rights. (f) Prime Contractor Responsibilities. The contractor shall obtain from its subcontractors or consultants the disclosure required in FAR Part 9.507?1, and shall determine in writing whether the interests disclosed present an actual, or significant potential for, an organizational conflict of interest. The contractor shall identify and avoid, neutralize, or mitigate any subcontractor organizational conflict prior to award of the contract to the satisfaction of the Contracting Officer. If the subcontractor's organizational conflict cannot be avoided, neutralized, or mitigated, the contractor must obtain the written approval of the Contracting Officer prior to entering into the subcontract. If the contractor becomes aware of a subcontractor's potential or actual organizational conflict of interest after contract award, the contractor agrees that the Contractor may be required to eliminate the subcontractor from its team, at the contractor's own risk. (g) Waiver. The parties recognize that this clause has potential effects which will survive the performance of this contract and that it is impossible to foresee each circumstance to which it might be applied in the future. Accordingly, the contractor may at any time seek a waiver from the Head of the Contracting Activity by submitting such waiver request to the Contracting Officer, including a full written description of the requested waiver and the reasons in support thereof. Insert provision 1352.213?71, Instructions for Submitting Quotations under the Simplified Acquisition Threshold?Non-Commercial, or similar language in all solicitations for non-commercial purchase orders under the simplified acquisition threshold. The contracting officer shall indicate whether electronic submissions of quotations will be accepted. Paragraph (b)(4) of provision 1352.213?71 may be tailored based on the evaluation factors. As prescribed in 48 CFR 1313.302?1?70, insert the following provision: Instructions for Submitting Quotations Under the Simplified Acquisition Threshold?Non-Commercial (Date) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition is ____. (b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. At a minimum, quotations must show? (1) The solicitation number; (2) The name, address, and telephone number of the offeror; (3) Acknowledgment of solicitation amendments; (4) A technical description showing that the offeror can supply the requirements in the specifications or statement of work in sufficient detail to allow the Government to evaluate the quotation in accordance with the evaluation factors stated in the solicitation. (5) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and reference information (including contract numbers, points of contact with telephone numbers and other relevant information). (6) Price and any supporting details for the price, as requested in the solicitation. (c) Offerors are responsible for submitting quotations, and any modifications thereto, so as to reach the Government office designated in the solicitation by the time specified. The offeror's initial quotation should contain the offeror's best terms from a price and technical standpoint. The Government may reject any or all quotations if such action is in the public interest; accept other than the lowest quotation; and waive informalities and minor irregularities in quotations received. Insert clause 1352.239?70, Software License Addendum, in all contracts when the primary purpose is to purchase new software licenses or renew existing licenses. As prescribed in 48 CFR 1339.107, insert the following clause: Software License Addendum (APR 2010) (a) This Addendum incorporates certain terms and conditions relating to Federal procurement actions. The terms and conditions of this Addendum take precedence over the terms and conditions contained in any license agreement or other contract documents entered into between the parties. (b) Governing Law: Federal procurement law and regulations, including the Contract Disputes Act, 41 U.S.C. Section 601 et. seq., and the Federal Acquisition Regulation (FAR), govern the agreement between the parties. Litigation arising out of this contract may be filed only in those fora that have jurisdiction over Federal procurement matters. (c) Attorney's Fees: Attorney's fees are payable by the Federal government in any action arising under this contract only pursuant to the Equal Access in Justice Act, 5 U.S.C. Section 504. (d) No Indemnification: The Federal government will not be liable for any claim for indemnification; such payments may violate the Anti-Deficiency Act, 31 U.S.C. Section 1341(a). (e) Assignment: Payments may only be assigned in accordance with the Assignment of Claims Act, 31 U.S.C. Section 3727, and FAR Subpart 32.8, ?Assignment of Claims.? (f) Invoices: Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. Section 3903) and Office of Management and Budget (OMB) Circular A?125, Prompt Payment. (g) Patent and Copyright Infringement: Patent or copyright infringement suits brought against the United States as a party may only be defended by the U.S. Department of Justice (28 U.S.C. Section 516). (h) Renewal of Support after Expiration of this Award: Service will not automatically renew after expiration of the initial term of this agreement. (i) Renewal may only occur in accord with (1) the mutual agreement of the parties; or (2) an option renewal clause allowing the Government to unilaterally exercise one or more options to extend the term of the agreement. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors must propose electronic and information technology (EIT) that meet the applicable Access Board accessibility standards at 36 CFR 1194 designated below: ___ 1194.21 Software applications and operating systems ___ 1194.22 Web-based intranet and internet information and applications ___ 1194.23 Telecommunications products ___ 1194.24 Video and multimedia products ___ 1194.25 Self-contained, closed products ___ 1194.26 Desktop and portable computers ___ 1194.31 Functional performance criteria ___ 1194.41 Information, documentation and support (b) The standards do not require the installation of specific accessibility-related software or the attachment of an assistive technology device, but merely require that the EIT be compatible with such software and devices so that it can be made accessible if so required by the agency in the future. (c) Alternatively, offerors may propose products and services that provide equivalent facilitation. Such offers will be considered to have met the provisions of the Access Board standards for the feature or components providing equivalent facilitation. If none of the offers that meet all applicable provisions of the standards could be accepted without imposing an undue burden on the agency or component, or if none of the offerors propose products or services that fully meet all of the applicable Access Board's provisions, those offerors whose products or services meet some of the applicable provisions will be considered eligible for award. Awards will not be made to an offeror meeting all or some of the applicable Access Board provisions if award would impose an undue burden upon the agency. (d) Offerors must submit representation information concerning their products by completing the VPAT template at http://www.Section508.gov. Insert a clause substantially similar to 1352.246?70, Place of Acceptance, in contracts and solicitations to indicate where the acceptance of supplies and/or services will take place. As prescribed in 1346.503, insert the following clause: Place of Acceptance (APR 2010) (a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract. (b) The place of acceptance will be: ENGINEERING DIVISION/N/OPS1 NOS 672 INDEPENDENCE PKWY CHESAPEAKE VA 23320
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NOAA/AGAMD/NCNT1000-13-01297/listing.html)
- Place of Performance
- Address: CHESAPEAKE, VA 23320
- Zip Code: 23320
- Zip Code: 23320
- Record
- SN03126416-W 20130726/130724235936-f80e50e14b61a74797ec3187ca0ffc2f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |