SOLICITATION NOTICE
51 -- Various Supplies
- Notice Date
- 7/30/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 2225 Haley Barbour Parkway, Yazoo City, MS 39194
- ZIP Code
- 39194
- Solicitation Number
- MPI40012
- Response Due
- 7/30/2013
- Archive Date
- 1/26/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is MPI40012 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-68. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-07-30 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yazoo City, MS 39194 The Federal Bureau of Prisons requires the following items, Meet or Exceed, to the following: LI 001: Stock no. CK6850DIRGL; 18VNICAD Cordless Master Kit, 3, EA; LI 002: Stock no. CTS561CL; Cordless Screwdriver W Clutch, 3, EA; LI 003: Stock no. IW75BP-6H; 3/4SQ Pistol HDL Impact Wrench, 3, EA; LI 004: Stock no. MICB103B; 0-3 in. Outside Mic Set, 2, EA; LI 005: Stock no. MICB4B; 3-4 in. Outside Mic, 2, EA; LI 006: Stock no. MICB5B; 4-5 in. Outside Mic, 2, EA; LI 007: Stock no. MCAL12A; 12 in. Electronic Cal, 2, EA; LI 008: Stock no. SQUARECOMB12; Blue Point Combination Square, 2, EA; LI 009: Stock no. BK8000; Advanced Digital Video Scope, 2, EA; LI 010: Stock no. EEDM596DK; Auto Meter Kit RMS, 3, EA; LI 011: Stock no. EEDM5750; Clamp-On Meter, 3, EA; LI 012: Stock no. CAG6B50DBKIT; Cordless Adhesive Gun, 2, EA; LI 013: Stock no. SDMC8D; Bit Set Diamond Combo BLK, 2, EA; LI 014: Stock no. SDMC8H; Bit Set 8pc Hex BLK, 2, EA; LI 015: Stock no. SDMC8MH; Bit Set 8pc Hex BLK, 2, EA; LI 016: Stock no. SDMC8T; Bit Set Torx BLK, 2, EA; LI 017: Stock no. TECH1FRM240; Torque Wrench, Electronic, TECHWRENCH, Flex Ratchet, 24 to 240 in. lbs., 1/4" drive, 3, EA; LI 018: Stock no. TECH2FRM100; Torque Wrench, Electronic, TECHWRENCH, Flex Ratchet, 5 to 100 ft. lbs., 3/8" drive, 3, EA; LI 019: Stock no. TECH3FRM250; Torque Wrench, Electronic, TORCHWRENCH, Flex Ratchet, 25 to 250, 3, EA; LI 020: Stock no. TECH4RM600; Torque Wrench, Electronic, TORCHWRENCH, Fixed Ratchet, 60 to 600 ft. lbs., 3/4" drive, 3, EA; LI 021: Stock no. QC2DTT250; DIG TORQTSTR 3/8 IN. 25-250 IN. LB., 2, EA; LI 022: Stock no. QC3DTT250; DIG TORQTSTR 1/2 IN. 25-250 FT. LB., 2, EA; LI 023: Stock no. QC4DTT600 DIT TORQTSTR 3/4 IN. 60-600 FT. LB., 2, EA; LI 024: Stock no. CT4410A; 3/8 CRDLES IMPACT WRENCH, 3, EA; LI 025: Stock no. CDR4450; 1/2 14.4V COMPACT CRDLS DRILL, 3, EA; LI 026: Stock no. CT625; 1/4 IN. LITHIUM IMPACT, 3, EA; LI 027: Stock no. CTS561; Screwdriver, Cordless, 7.2V, 3, EA; LI 028: Stock no. MG725; 1/2 MAG IMPACT, 3, EA; LI 029: Stock no. MG325; 3/8 IMPACT WRENCH, 3, EA; LI 030: Stock no. FAR72C; Ratchet, Air, Super Duty, 3/8" Drive (5-65 ft. lb.), 3, EA; LI 031: Stock no. PDR5000A; 1/2 AIR DRILL, 3, EA; LI 032: Stock no. PDR3000A; 3/8 AIR DRILL, 3, EA; LI 033: Stock no. PH 305DB; AIR HAMMER W/ QC CHUCK, 3, EA; LI 034: Stock no. PT250A; 3 CUTOFF TOOL, 3, EA; LI 035: Stock no. PT450; 4 1/2 ANGLE GRINDER, 3, EA; LI 036: Stock no. PT200A; DIE GRINDER, 3, EA; LI 037: Stock no. PS4512; 5 PALM ORBITAL SANDER, 3, EA; LI 038: Stock no. AT195; POWERED SHEARS, AIR, 3, EA; LI 039: Stock no. AT109DGK; Kit, Die Grinder, Mini Right Angle, 23 pcs, 3, EA; LI 040: Stock no. PTND4KA; NUT DRIVER SAE 4PC KIT, 3, EA; LI 041: Stock no. PTNDM4KA; NUT DRIVER METRIC 4PC KIT, 3, EA; LI 042: Stock no. PT280THDGA; Tool, Air, Crud Removal, 3, EA; LI 043: Stock no. CTS561; Screwdriver, Cordless, 7.2V, 3, EA; LI 044: Stock no. DBC260A; Set, Drill Bit, Cobalt, 60 Bits, 3, EA; LI 045: Stock no. LHS606D; KIT, HOLE SAW AND ARBOR, 3/4"-1 1/4", 7 PCS., 3, EA; LI 046: Stock no. LHS3D; Arbor, Hole Saw, 5/8"-18 Thread, 3, EA; LI 047: Stock no. LHS6C; Arbor, Hole Saw, 1/2"-20 Thread, 3, EA; LI 048: Stock no. AIRHOSE50; Air Hose, Reinforced Polyurethane, 50 ft., 3, EA; LI 049: Stock no. AIRHOSE35; Air Hose, Reinforced Polyurethane, 35 ft., 3, EA; LI 050: Stock no. EECT300HR; Circuit Test 6 and 12V Red, 3, EA; LI 051: Stock no. EECS3D6C; DTAC ELITE BATTERY SYS TESTER, 1, EA; LI 052: Stock no. EEJP500; SNAP ON 12V JUMPSTARTER, 2, EA; LI 053: Stock no. LSTSD569; CROSSTESTLEVEL&PLUMB 2X3/50X70, 4, EA; LI 054: Stock no. TDTDM117A; MASTER TAP AND DIE SET, 3, EA; LI 055: Stock no. TB2DA; TOTE BAG W/STORAGE BIN, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Prisons intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Prisons is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. An award will be made to a responsive offeror (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the Lowest Price Technically Acceptable (LPTA). An offer is technically acceptable if its technical capabilities conform to the Government's Statement of Work or listed specs whichever is applicable to the buy. BRAND NAME OR EQUAL FAR 52.211-6 Aug. 1999 (a) If an item in this solicitation is identified as "brand name or equal", the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must: (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. NO SUBSTITUTIONS, EXACT MATCH ONLY.The vendor may not substitute any item/service listed on this order without prior written approval from the Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this RFQ. Items/services that do not conform to descriptions and part numbers found in this RFQ will be rejected at the time of delivery causing a return at the vendor's expense. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/BPR/PPB/MPI40012/listing.html)
- Place of Performance
- Address: Yazoo City, MS 39194
- Zip Code: 39194
- Zip Code: 39194
- Record
- SN03131981-W 20130801/130731000139-e518aa8b9aacd4dee0f7df97b3a97de6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |