SOURCES SOUGHT
20 -- LCAC Rugged Ethernet Switch Unit
- Notice Date
- 8/6/2013
- Notice Type
- Sources Sought
- NAICS
- 334419
— Other Electronic Component Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Panama City Division, Code B32, 110 Vernon Ave, Panama City, Florida, 32407, United States
- ZIP Code
- 32407
- Solicitation Number
- N61331-Q-CR-0002
- Archive Date
- 9/11/2013
- Point of Contact
- Doug Yager,
- E-Mail Address
-
douglas.yager@navy.mil
(douglas.yager@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- The Naval Surface Warfare Center, Panama City Division (NSWC PCD) is conducting a survey of potential sources for the Landing Craft Air Cushion (LCAC) program. NSWC PCD is seeking sources for a commercial off-the-shelf (COTS) Rugged Ethernet Switch Unit for a system upgrade effort. This is a REQUEST FOR INFORMATION (RFI) for a rugged gigabit Ethernet Switch Unit for the Landing Craft Air Cushion (LCAC). THIS IS NOT A REQUEST FOR PROPOSALS. Key Parameters include but not limited to: Features: •a) Port Quantity: 16 (threshold-minimum) •b) Connection Support: 100Base-Tx and 1000Base-T (threshold-minimum) •c) IEEE 802.1w Rapid Spanning Tree Protocol Compliant Electrical: •d) Input Power Voltage Range: 18-32 VDC (28 VDC nominal) •e) Protection: Over-current protection is desired Physical: •f) Cooling: conduction cooling with no external forced-air required •g) Corrosion Resistance: All connectors, fasteners, and the chassis material inherently corrosion resistant or treated (for example, anodized, chemical-filmed, or coated) to resist corrosion •h) Mounting: provisions for installation on a standard EIA-310 19" rack shelf (shelf not required as part of unit) •i) Power-on Indicator: external indicator that indicates the unit is powered ON is desired •j) Dimensions: • i. Height: 3.5" (threshold-maximum) • ii. Width: 8" (threshold-maximum) • iii. Depth : 16" (threshold-maximum) •k) Weight: 10 lbs (threshold-maximum) •l) Connectors: MIL-STD grade, threaded or bayonet style, circular connectors for external interfaces. No special pinout mappings required. Low connector count desired. Connector(s) not limited to single interface. •m) Grounding/Bonding: provisions for grounding the chassis to the installation rack Environment: NOTE: The Government will perform qualification testing of the unit to the below tests. •n) MIL-STD-461F Electromagnetic Interference (EMI), Navy surface ship applications: • iv. CE101 • v. CE102 • vi. CS101 • vii. CS106 • viii. CS114 • ix. CS116 • x. RE101 • xi. RE102 • xii. RS101 • xiii. RS103 •o) MIL-STD-810F tailored environmental specifications • i. Low Temperature: -25°C, operational • ii. High Temperature +55°C, operational • iii. Humidity: 95%, non-condensing, operational • iv. Vibration: 10 to 2000 Hz, operational • v. Shock: 25 Gs, operational Vendors shall provide the following information: Responses for each key parameter listed in this document, i.e. how the proposed solution meets each parameter listed in this document. Relevant documentation (data sheets, user manuals, test reports, etc.). Under separate cover, provide unit cost with price breaks up to a quantity of 100. Range with not-to-exceed estimate is acceptable. Available reliability data with associated application conditions and measuring methods. Anticipated life-cycle of the proposed solution, e.g. anticipated active production years with follow on support years for existing customers. Lead-time for delivering first four units and standard lead-times thereafter should a production contract be awarded. Return for repair process with minimum estimated service charge. Technology maturity or technology readiness level (TRL) as defined by the Defense Acquisition Guidebook (DAG), and use in DoD programs. Description of any onboard diagnostic and/or fault identification/isolation capability. RESPONSES: Interested parties may provide electronic or paper submittals to be received by the Government by 27 August 2013. There is no specific format or outline that submittals must follow. Each response must reference the RFI title. Contractors responding should indicate whether they are a small business (S), a small disadvantaged business (SDB), 8(a), or large business (L). Telephone responses will not be honored. Technical questions should be directed to Doug Yager at douglas.yager@navy.mil. Electronic responses to this announcement should be directed to Ivan Lugo at ivan.lugo@navy.mil. Paper submittals should be directed to NSWCPCD, ATTN: Ivan Lugo, Code E31, 110 Vernon Ave, Panama City, FL 32407-7001. This is a Sources Sought announcement, a market survey for written information only. THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY AND IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY ITEMS/SERVICES, NOR FOR THE GOVERNMENT TO PAY FOR THE INFORMATION RECEIVED. In the event a solicitation is developed, it will be assigned a formal Request for Proposal (RFP) number and the announcement will be published in the Navy Electronic Commerce Online (NECO) and Federal Business Opportunities (FedBizOpps). This announcement should not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. NAICS Code 334419 applies, Size Standard is 500 employees, FSC 5930.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/f46edfbeeb0b345d67f28da924713a4e)
- Record
- SN03138480-W 20130808/130806235500-f46edfbeeb0b345d67f28da924713a4e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |