SPECIAL NOTICE
66 -- Cord/Tape Grips and Sedam Grips - Sole Source Justification
- Notice Date
- 8/6/2013
- Notice Type
- Special Notice
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC/PZIO - WPAFB, 1940 ALLBROOK DRIVE, WRIGHT-PATTERSON AFB, Ohio, 45433-5309, United States
- ZIP Code
- 45433-5309
- Solicitation Number
- FA8601-13-T-0235
- Archive Date
- 8/27/2013
- Point of Contact
- Matthew J. Strange, Phone: 9372570997
- E-Mail Address
-
matthew.strange@wpafb.af.mil
(matthew.strange@wpafb.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Sole Source Justification The United States Air Force, AFLCMC/Operational Contracting Division, Wright-Patterson AFB, Ohio 45433-5344. This is a Sole Source synopsis published for informational purposes only. This proposed action is for Cord/Tape Grips and Sedam Grips used to test the strength and elongation of textile cords, tapes, and webbings. The government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. This proposed procurement will be a Sole Source under North American Industry Classification System Code (NAICS) 334519. Size standard is 500 employees. The Tinius Olsen Cord/Tape Grips and Sedam Grips are the only known item that satisfies the critical requirements. The required specifications for the grips: Cord/Tape Grip Requirements • Lowe and upper grips each made of split ballard grip with a catch lip to prevent the cord from slipping off the grips drum. • Must have a smooth, non-grooved surface • Must have a minimum capacity of at least 25 KN • Must handle a maximum sample cord diameter of 12mm • Interfaces with female lnstron adapter, the male adapter on the grips need to have male fitting that is cylindrical with 1.25" diameter, extends outside of the surface of the grip by a length of 1.875", has through whole centered on the axes of the adapter and perpendicular to it and located at a distance of.625 " from the top of the feting and allows a close fit of.5 clevis pin to go through it Sedan Webbing Grip Requirements • Lowe and upper grips each made of two split drums • Must have a minimum capacity of 5000Lbs • Interfaces with female lnstron adapter, the male adapter on the grips need to have male fitting that is cylindrical with 1.25" diameter, extends outside of the surface of the grip by a length of 1.875", has through whole centered on the axes of the adapter and perpendicular to it and located at a distance of.625 "from the top of the feting and allows a close fit of.5 clevis pin to go through it. This notice of intent is not a request for competitive quotations. However, all responsible sources may submit a capability statement, proposal, quotation or exception to the intent to purchase on a sole source basis, which shall be considered by the Government if received within five (5) days of this notice. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. The Department of Defense (DoD) has determined the System for Award Management (SAM) to be the single DoD registration for contractors who conduct business or who are interested in conducting business with the DoD. Contractors must be registered in SAM prior to award for solicitations issued after 21 May 1998. You may contact SAM at 1-866-606-8220. SAM website: http://www.sam.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/88 CONS/FA8601-13-T-0235/listing.html)
- Place of Performance
- Address: 1940 Allbrook Dr., WPAFB, Ohio, 45433, United States
- Zip Code: 45433
- Zip Code: 45433
- Record
- SN03138827-W 20130808/130806235816-56c099b75c89dbe5250de521ab6bd222 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |