SOLICITATION NOTICE
42 -- Chemical Protective Clothing Packs
- Notice Date
- 8/8/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 935 Pennsylvania Ave. N.W., Washington, DC 20535
- ZIP Code
- 20535
- Solicitation Number
- 2251137939
- Response Due
- 8/15/2013
- Archive Date
- 2/11/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 2251137939 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-69. The associated North American Industrial Classification System (NAICS) code for this procurement is 423990 with a small business size standard of 100.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-08-15 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Special Shipping Instructions. The Federal Bureau of Investigation requires the following items, Meet or Exceed, to the following: LI 001: SIZE MEDIUM Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 24, EA; LI 002: SIZE LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 100, EA; LI 003: SIZE X-LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 140, EA; LI 004: SIZE 2X-LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 140, EA; LI 005: SIZE 3X-LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 100, EA; LI 006: SIZE 4X-LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 24, EA; LI 007: SIZE 5X-LARGE Heat Sealed Chemical Protective Clothing Kit consisting of: -1 Tyvek F Suit (Dupont TF169T GY) - stiched and heat sealed seams, chemical zipper flap, attached hood and feet, elastic face and wrist closure, laminate of Dupont Tyvek and Tyvek F polymer -1 pair of Purple Nitrile Gloves (Kimberly Clark 55081) - 100% latex free, powder free, disposable, 4 mil -1 pair Latex Booties (Daniel Safety 10244) - 0.5mm thick latex ruber, 15" height, textured sole -1 pair Smooth Curved 7 mil. Butyl Rubber Gloves (North B074GI) - 7 mil -1 Roll of 2in by 10yd Duct Tape (ProTape 223) - gray -1 Vacuum Sealed Bag 16in by 24in - kit must contain permanent vacuum, transparent plastic bag -1 Insert with Size Indication -INCLUDE SHIPPING IN UNIT PRICE ***This quantity may increase or decrease. Price must stay constant independent of the quantity.***, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Investigation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Investigation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. In addition to providing pricing at www.FedBid.com for this solicitation, each Offer must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. BRAND NAME OR EQUAL FAR 52.211-6 Aug. 1999 (a) If an item in this solicitation is identified as "brand name or equal", the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must: (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. The deliveries will be in small quantities (around 10 each) to approximately 100 locations within the United States including FBI field offices. Locations will be provided after award. Shipping SHALL be included in the unit price. The FBI reserves the right to request a sample of the kit prior to award. Due to the time constraint the sample must be sent within 2 days of the request in order to allow time for evaluation and award. All bidders must include as an attachment the specification for their proposed system. Additionally, bidders must include photos and brochure information for their proposed items, with a point by point comparison of their proposed items and the attached mandatory specifications. For example: Government requesting 0.6 thicknesses Vendor proposes 0.7 thicknesses. The evaluation of this buy will be based on information received from vendors prior to the bid response closing time. No additional bid information to include photos, specifications, or pricing information will allowed after bid closing date and time. Vendors are responsible for ensuring all required bid information is submitted prior to bid closing/response date. The buyer for this procurement will not seek additional information from vendor after the bid close/response date. Failure to comply with this buy term will cause vendor bid to be not technically acceptable and the government will not consider the bid for award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/FBI/FedBid/2251137939/listing.html)
- Place of Performance
- Address: Special Shipping Instructions.
- Zip Code: -
- Zip Code: -
- Record
- SN03143302-W 20130810/130809000434-e36ccb5beac47591058e4c220420f8cb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |