MODIFICATION
95 -- Guide Rods for Lower St. Anthony Falls
- Notice Date
- 8/8/2013
- Notice Type
- Modification/Amendment
- NAICS
- 331110
— Iron and Steel Mills and Ferroalloy Manufacturing
- Contracting Office
- USACE District, St. Paul, Contracting Division CEMVP-CT, 180 East Fifth Street, St. Paul, MN 55101-1678
- ZIP Code
- 55101-1678
- Solicitation Number
- W912ES-13-T-0097
- Response Due
- 8/27/2013 9:00:00 AM
- Archive Date
- 9/6/2013
- Point of Contact
- Justin H. Rose, Phone: 6512905422
- E-Mail Address
-
justin.h.rose@usace.army.mil
(justin.h.rose@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Questions / Answers A: 1) Can you clarify the areas to be coated with Colmonoy 63HV? Are both outside diameters to be coated the entire length of 14' 11 ½"? Are the ends of the guide rod to be coated? Answer Q1) Only the outer diameter nominal 5.995-inch requires the coating. The nominal 5.493-inch diameter end sections do not require the coating. 2) Is it acceptable to center drill both ends of the guide rod? Answer Q2) It is acceptable to center-drill the ends of the guide rod.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-13-T-0097/listing.html)
- Place of Performance
- Address: Minneapolis, Minnesota, United States
- Record
- SN03143372-W 20130810/130809000515-f4d3a46f7ee97da1b8fe2eefcc05daad (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |