SOLICITATION NOTICE
17 -- PAD ASSEMBLY, TERMIN
- Notice Date
- 8/22/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPE7M213X0025
- Archive Date
- 9/20/2013
- Point of Contact
- Ryan R. Gulick, Phone: 6146929641
- E-Mail Address
-
ryan.gulick@dla.mil
(ryan.gulick@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Federal Business Opportunities (FedBizOpps) Synopsis Information Form 1. ACTION CODE: (X ) P = Presolicitation ( ) M = Modification to a Previous Presolicitation Notice 2. CLASSIFICATION CODE: 17 3. NAICS CODE: 336413 4. TITLE: PAD ASSEMBLY, TERMIN 5. RESPONSE DATE: 9/5/2013 6. PRIMARY POINT OF CONTACT: PMCMBBS, Ryan Gulick, (614) 692-9641 7. SECONDARY POINT OF CONTACT James E. Duffala, 614-692-1679 8. SOLICITATION NUMBER: SPE7M2-13-X-0025 9. DESCRIPTION: NSN(s) 1710-00-814-5903 Item Descriptions: PAD ASSEMBLY, TERMIN Estimated Yearly Quantity: 368 Unit of Issue: EA Destination Information: Items will be shipped to various zones within conus. Inspection and Acceptance @ Origin, Fob Destination. Qualified Products List/drawings: PAD ASSEMBLY,TERMINAL IMPACT END ITEM USE: DECK, AIRCRAFT CARRIER 82N BASIC ALRE. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.. NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). FIRST ARTICLE/GOVERNMENT TESTING IS REQUIRED I.A.W. MPR 1212 PARA. 11 A THRU C. FIRST ARTICLE SAMPLE SIZE SHALL BE 3 PADS. SHIP SAMPLES TO NAVAIRWARCENACDIVLKE CODE 4.8.13.2, BLDG 148-2 HIGHWAY 547 LAKEHURST, NJ 08733 3 SAMPLES ARE NEEDED FOR TESTING. ALL THREE SAMPLES WILL BE DESTROYED DURING TESTING. NOTICE TO BUYER: INCLUDE DPACS CLAUSE I09D07-DELEGATION OF AUTHORITY FOR FIRST ARTICLE APPROVAL (DSCC 52.209-9C12) ON AWARDS FOR THIS NSN TO ANY VENDOR THAT WILL BE REQUIRED TO PERFORM CONTRACTOR FIRST ARTICLE TESTING. FAR CLAUSE 52.246-11 APPLIES A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008 OR THE FOLLOWING TAILORED VERSION OF ISO 9001:2008 IS REQUIRED OR A PROGRAM EQUIVALENT TO THE TAILORED VERSION OF THE ISO 9001:2008 IS REQUIRED. DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008 4.2.1 General, Documentation Requirements [b and d only] 4.2.2 Quality manual 4.2.3 Control of documents 4.2.4 Control of records 6.2.2 Competence, training and awareness 6.4 Work environment (if applicable) 7.1 Planning of product realization 7.2.1 Determination of requirements related to the product 7.2.2 Review of the requirements related to product 7.2.3 Customer communication 7.3.7 Control of design and development changes 7.4.1 Purchase Product 7.4.3 Verification of purchased product 7.5.1 Control of production and service provision 7.5.3 Identification and traceability 7.5.4 Customer property (if applicable) 7.5.5 Preservation of product 7.6 Control of monitoring and measuring equipment 8.1a,,General for Measurement, Analysis and Improvement 8.2.2 Internal Audit 8.3 Control of nonconforming product 8.2.4 Monitoring and measurement of product 8.5.2 Corrective action 8.5.3 Preventive action ENGINEERING CHANGE PROPOSALS (ECP) AND REQUESTS FOR WAIVERS AND DEVIATIONS, SHALL BE PROCESSED AND SUBMITTED AS SPECIFIED BY AND IN ACCORDANCE WITH MIL-STD-973. SOURCE CONTROL DRAWING DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). REMINDER: THIS IS A CRITICAL ITEM AND ALL MAJOR AND MINOR WAIVER/DEVIATION REQUESTS MUST BE FORWARDED TO THE DSCC CONTRACTING OFFICER WHO WILL COORDINATE THE REVIEW AND APPROVAL THROUGH THE RESPONSIBLE ENGINEERING SERVICE ACTIVITY. KASTALON, INC. 2A197 P/N A000101C REV 0 IAW BASIC DRAWING NR 80020 408320 REVISION NR K DTD 07/10/2007 PART PIECE NUMBER: -4 All responsible sources may submit an offer/quote which shall be considered. The subject requirement is for the acquisition of one (1) NSN. This proposed procurement is for Federal Supply Class 1710. See Note(s): 26. The requirement will result in an award of an Indefinite Quantity Contract for which delivery orders may be place for (1) base year and (2) option years. The solicitation will be available in FedBizOpps on or about AUGUST 22 ND, 2013. FAT-FIRST ARTICLE TESTING REQUIREMENT FAT WAIVER FOR CAGE 2A197 The delivery for this acquisition will be on an FOB Destination basis with Inspection and Acceptance at Origin. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 3 years. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. This solicitation will be issued as an SMALL BUSNIESS SET ASIDE. "Notice to All Contractors: In a final rule contained in the Federal Acquisition Circular 01- 26 (Item I, FAR Case 2002-24) published in the Federal Register on December 20, 2004, the Federal Acquisition Regulation was amended to require offerors to submit representations and certifications electronically via the Business Partner Network. Offerors are encouraged to complete an Online Representations and Certifications Application (ORCA) as soon as possible since this requirement will be appearing in solicitations in the near future. The ORCA can be found at http://orca.bpn.gov. Until ORCA is fully implemented continue to comply with all government instructions and requirements in solicitations and contract awards."
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPE7M213X0025/listing.html)
- Place of Performance
- Address: DLA LAND AND MARITIME, 3990 E. BROAD ST., COLUMBUS, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN03158504-W 20130824/130822235557-501e56a75feacd2a690ecfe7c2723221 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |