SOLICITATION NOTICE
66 -- BRAND NAME OR EQUAL-ELECTRICAL CABLING FOR VSANS PRE-SAMPLE VACUUM VESSEL
- Notice Date
- 8/28/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Bldg 301 Room B117, Gaithersburg, MD 20899
- ZIP Code
- 20899
- Solicitation Number
- SB1341-13-RQ-0894
- Response Due
- 9/6/2013
- Archive Date
- 3/5/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is SB1341-13-RQ-0894 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-69. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-09-06 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Gaithersburg, MD 20899 The DOC National Institute of Standards and Technology requires the following items, Brand Name or Equal, to the following: LI 001: Motor Cable (see minimum requirements) - gauge: AWG18 - minimum of 16 conductor pairs in cable - cable diameter: 1.25? or less Commercial equivalent: AlphaWire 2249/19C (19 pairs), shielded, 2, EA; LI 002: Limit Switch Cable (see minimum requirements) - gauge: AWG22 - minimum of 40 conductors in cable - maximum cable diameter: 0.8 ? Commercial equivalents: Alphawire 1299/40C (40 conductors), 2, EA; LI 003: Encoder Cable (see minimum requirements) - gauge: AWG 24 - minimum of 32 conductor pairs in cable Commercial equivalents: AlphaWire 5480/50C (50 pairs), shielded or Belden 9950 0601000 (50 pairs), shielded, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOC National Institute of Standards and Technology intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOC National Institute of Standards and Technology is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Contracting Officer's Authority. The Contracting Officer is the only person authorized to make or approve any changes in any of the requirements of this contract, and, notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely in the Contracting Officer. In the event the contractor makes any changes at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract terms and conditions, including price. Insert the clause 1352.209?73, Compliance with the Laws, in all solicitations and contracts. As prescribed in 48 CFR 1309.507?2(c), insert the following clause: Compliance With the Laws (APR 2010) The contractor shall comply with all applicable laws, rules and regulations which deal with or relate to performance in accord with the terms of the contract. As prescribed in 48 CFR 1313.106?2?70, insert the following provision: Evaluation Utilizing Simplified Acquisition Procedures (Date) All solicitations using simplified acquisition procedures in FAR Part 13 must include provision 1352.213?70, Evaluation Utilizing Simplified Acquisition Procedures, or similar language setting out evaluation criteria.The Government will issue an order resulting from this request for quotation to the responsible offeror whose quotation results in the best value to the Government, considering both price and non-price factors. Insert provision 1352.213?71, Instructions for Submitting Quotations under the Simplified Acquisition Threshold?Non-Commercial, or similar language in all solicitations for non-commercial purchase orders under the simplified acquisition threshold. The contracting officer shall indicate whether electronic submissions of quotations will be accepted. Paragraph (b)(4) of provision 1352.213?71 may be tailored based on the evaluation factors. As prescribed in 48 CFR 1313.302?1?70, insert the following provision: Instructions for Submitting Quotations Under the Simplified Acquisition Threshold?Non-Commercial (Date) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition is ____. (b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. At a minimum, quotations must show? (1) The solicitation number; (2) The name, address, and telephone number of the offeror; (3) Acknowledgment of solicitation amendments; (4) A technical description showing that the offeror can supply the requirements in the specifications or statement of work in sufficient detail to allow the Government to evaluate the quotation in accordance with the evaluation factors stated in the solicitation. (5) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and reference information (including contract numbers, points of contact with telephone numbers and other relevant information). (6) Price and any supporting details for the price, as requested in the solicitation. (c) Offerors are responsible for submitting quotations, and any modifications thereto, so as to reach the Government office designated in the solicitation by the time specified. The offeror's initial quotation should contain the offeror's best terms from a price and technical standpoint. The Government may reject any or all quotations if such action is in the public interest; accept other than the lowest quotation; and waive informalities and minor irregularities in quotations received. 1352.246-70, Place of Acceptance (APR 2010) (a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract. (b) The place of acceptance will be: NIST Building 215, 100 Bureau Drive, Gaithersburg, Maryland 20899 Offerors must submit all questions concerning this solicitation in writing to Harry Brubaker at Harry.Brubaker@nist.gov. Questions should be received no later than 5 calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.(End of Provision) The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. 52.211-6, Brand Name or Equal 52.212-1, Instructions to Offerors-Commercial Items 52.212-3, Offeror Representations and Certifications-Commercial Items 52.217-5, Evaluation of Options 52.225-18, Place of Manufacture; Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2012) (1) In accordance with Sections 543 and 544 of Public Law 112-55 Commerce, Justice, Science, and Related Agencies Appropriations Act 2012, Title V (General Provisions) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) The Offeror represents that, as of the date of this offer - (a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreements with the authority responsible for collecting the tax liability. (End of provision) In accordance with FAR 52.204-99 (September 2012) (DEVIATION), the awardee must be registered in the System for Award Management (www.sam.gov) prior to award. Refusal to register shall forfeit award. Technical Quotation and Capability: The Offeror shall submit a technical quotation. The technical quotation shall address the following: 1. The Offeror shall submit a technical description for the equipment it is proposing, which clearly identifies the manufacturer, make and model. 2. The Offeror must demonstrate that its proposed equipment meets or exceeds each minimum requirement described in list of minimum requirements by providing a citation to the relevant section of its technical description or product literature. Award shall be made to the Offeror whose quotation offers the lowest price and is technically acceptable to the Government. The Government will evaluate the quotations based on each of the Specifications. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the Offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an Offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. The Government will evaluate price for reasonableness. Price will not be evaluated on quotes that are determined technically unacceptable under the Technical Capability Evaluation Factor. Award shall be made to the firm that provides the lowest priced, technically acceptable quote. Technical acceptablity means that the quote meets all of the stated minimum specifications. Bid Term: Vendors must provide manufacturer part number, name, and extended specifications for evaluation in order to be considered. If the Offeror is not the manufacturer to provide the item(s) in the quotation shall be included.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-13-RQ-0894/listing.html)
- Place of Performance
- Address: Gaithersburg, MD 20899
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN03167058-W 20130830/130829001224-792b138c2971cdd779da36083940d8ad (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |