SOLICITATION NOTICE
34 -- Willis-Alzmetall AB40/HST Drill or equal
- Notice Date
- 9/6/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- USPFO for Missouri, 7101 Military Circle, Jefferson City, MO 65101-1200
- ZIP Code
- 65101-1200
- Solicitation Number
- W58M0C31985001
- Response Due
- 9/16/2013
- Archive Date
- 11/5/2013
- Point of Contact
- Joseph Paul Caldwell, 573-638-9847
- E-Mail Address
-
USPFO for Missouri
(joseph.p.caldwell.mil@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for Willis-Alzmetall AB40/HST Drill or equal advertised as a 100% total small business set-aside, no further designation. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC 2005-60 effective 26 Jul 2012). The NAICS code is 423830 and the small business size standard is 100 employees. It is incumbent upon the interested parties to review this site frequently for any updates/amendments to any and all documents. You will not be eligible to receive an award if you are not in the System for Award Management database. (Reference: DFARS 252.204-7004, Alt A Required Central Contractor Registration). SCOPE Contractor Responsibilities: Provide the following (below deliverables) to the MO-AVCRAD located at 2501 Lester Jones Ave., Springfield, MO 65803-9513; Attn: CPT Adam Mankey. Deliverables: Overview - The Missouri TASMG requires a drill press that will comply with the close tolerance set by Sikorsky Blade Cuff Repair procedures. Background - the Missouri TASMG has been tasked with bringing UH-60 Blades into compliance with H-60-10-SOF-01. The procedure for this will be covered in an upcoming Maintenance Engineering Order, which requires extremely close tolerance tooling that is not currently available at the MO TASMG or through the US Army Supply System. These items will need to be locally procured and fully operational before the unit is able to meet this NGB Directive. The unit's current drill press will not hold the +/-.0004 specifications that are required for this project. Therefore, the unit is attempting to acquire a drill press that meets its new mission requirements. Actions required: Provide Willis-Alzmetall AB40/HST Drill or equal (product specifications below or detailed specification amy be found at http://www.alzmetall.de/alzmetall/index.php?id=ab40saeule&L=1): 1.DD-STRUCTURED PAINTING: Grey RAL 7035 and Blue RAL 5003 2.STANDARD EQUIPMENT: Mains switch lockable, overload protection switch, emergency-OFF mushroom switch (self-locking), protection class IP 54, electromagnetic feed clutch, digital readout for spindle speed (not with AB 65), contactor control for clockwise spindle rotation (with AB 40 and AB 65), electrical spindle speed setting (with AB 40), built-in work light (with AB 65 only), control and light transformer (with AB40). 3.Drilling Performance In Structural Steel 600N/mm2 Tensile Strength 40 4.Drilling Performance In Cast Iron 200N/mm2 Tensile Strength 46 5.Drilling Capacity In Structural Steel 600N/mm2 Tensile Strength 46 6.Tapping Performance in Structural Steel 600N/mm2 Tensile Strength Cast Iron 200 N/mm Tensile Strength 30M /36M 7.Spindle Taper, Short Spindle MT 4 8.Spindle Travel 160 9.Column to Spindle Distance 300 10.Column Diameter 145 11.Machine Tube 615 x 430 12.Clamping Surface (wxd) 13.T-Slots (number x width x distance) 2 x 14 x 224 14.Automatic Feed 0,1-0,2-0,3-0,4 Net Weight Approx. 500 15.Drive Inf. Variable 16.Motor 750/1500 1,8/2,9 Spindle Speed Ranges 100-1600 200-3200 Motor 750/1500 1,8/2,9 Spindle Speed Ranges 70-4000 with gear 17.Options Include: Hand reverse switch, Halogen work light, AZ Automatic tapping with foot switch, 6 taps/minute max, Flood coolant with the sump in the machine Note: The Contracting Officer reserves the right to award to other than the low bidder based on the following items in the respective order: Technical acceptability compared to price resulting in the best overall value for the Government. The offer submittal shall list the item by part number, the product description as listed above and any transportation costs. The offer shall list unit prices, total for each part number, and an overall totaled price. Offerors shall submit their quote on letterhead stationery, provide unit prices with a grand total, and the contractor must remit a completed copy of the REPRESENTATIONS AND CERTIFICATIONS at FAR 52.212-3. The government will not accept incomplete proposals/quotations. Offers will be evaluated on technical acceptability and price for the overall best value. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. If an offer cannot comply with every requirement, that offer will not be technically acceptable, and therefore will not be considered. Once an offer has been determined to be technically acceptable, and in compliance with all directions in this solicitation, the Government will award to the offeror with the best overall value. Additionally the following clauses and provisions apply to this acquisition: 52.204-7 Central Contractor Registration 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations -- Representation 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations 52.212-1 Instructions to Offerors - Commercial Items 52.212-2 Evaluation - Commercial Items 52.212-3 Offeror Representations and Certification - Commercial Items 52.212-4 Contract Terms and Conditions Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items, and includes the following clauses as cited: (b) 5, 16, 17, 18, 19, 20, 24(i), 24(ii), and 31 52.214-34 Submission of Offers in the English Language 52.214-35 Submission of Offers in U.S. Currency 52.219-1 Small Business Program Representations 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns 52.219-28 Post - Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor - Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-22 Previous Contracts and Compliance Reports 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Veterans 52.222-36 Affirmative Action for Workers with Disabilities 52.222-37 Employment Reports on Veterans 52.222-50 Combating Trafficking in Persons 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13 Restrictions on Certain Foreign Purchases 52.225-18 Place of Manufacture 52.225-20 Prohibition on Conducting Restricted Business Operations in Sudan -- Certification 52.225-25 Prohibition on Engaging in Sanctioned Activities Relating to Iran-- Certification 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim 52.242-15 Stop- Work Order 52.247-34 F.O.B. Destination 52.252-1 Solicitation Provisions Incorporated By Reference 52.252-2 Clauses Incorporated by Reference 52.252-6 Authorized Deviations in Provisions 52.252-6 Authorized Deviations in Clauses Applicable DFARS clauses included: 252.203-7000 Requirements Relating to Compensation of Former DOD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DOD Officials 252.204-7003 Control of Government Personnel Work Product 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A 252.204-7006 Billing Instructions 252.204-7008 Export-Controlled Items 252.204-7011 Alternate Line-Item Structure 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items provisions 252.225-7001 Buy American and Balance Of Payments Program 252.225-7002 Qualifying Country Sources As Subcontractors 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies on Contract Payments 252-247-7023 Alt III Transportation of Supplies by Sea The full text of a clause may be accessed electronically at http://farsite.hill.af.mil/. Offers must be received NLT 3:00 P.M. (CST), 16 September 2013. Quotes can be faxed (in accordance with FAR provision 52.214-13 TELEGRAPHIC BIDS) to the attention of CPT Paul Caldwell at (573) 638-9619 or emailed to joseph.p.caldwell.mil@mail.mil; if facsimile is the preferred method then a follow-up email or phone call is requested to ensure receipt. Offers received after this date and time will be considered as late submissions in accordance with 52.212-1(f) and will not be evaluated or considered. Please refer any questions to the above at joseph.p.caldwell.mil@mail.mil. Contracting Office Address: 7101 Military Circle Jefferson City, Missouri 65101 United States Primary Point of Contact.: CPT Paul Caldwell joseph.p.caldwell.mil@mail.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA23/W58M0C31985001/listing.html)
- Place of Performance
- Address: USPFO for Missouri 7101 Military Circle, Jefferson City MO
- Zip Code: 65101-1200
- Zip Code: 65101-1200
- Record
- SN03178091-W 20130908/130907000122-b9d5dbbbcbef6cdfaaf01182893d35a9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |