Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 13, 2013 FBO #4311
SOLICITATION NOTICE

42 -- Fire Fighting Gear - DFARS 252.209-7997 - Brand Name J&A

Notice Date

9/11/2013
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

Department of the Air Force, Air Force Materiel Command, AFNWC/PZI - Kirtland, Installation Contracting Division, AFNWC/PZI, 8500 Gibson SE, Bldg 20202, Kirtland AFB, New Mexico, 87117-5606, United States
 

ZIP Code

87117-5606
 

Solicitation Number

F2K2AC3213A001
 

Archive Date

10/1/2013
 

Point of Contact

Heather L. Miller, Phone: 505-846-5719, Rafaela Kovacs, Phone: 5058467691
 

E-Mail Address

heather.miller@kirtland.af.mil, rafaela.kovacs@kirtland.af.mil
(heather.miller@kirtland.af.mil, rafaela.kovacs@kirtland.af.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

Brand Name J&A DFARS 252.209-7997 This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This requirement is advertised as Small Business Set Aside. This requirement is an 100% Small business set aside purchase. The NAICS Code for this synopsis/solicitation is 339113, Surgical Appliance and supplies Manufacturing. The size standard for this NAICS is 500 employees. Solicitation/Purchase Request number F2K2AC3213A001 is issued as a Request for Quote (RFQ). This document incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2005-69, effective 03 Sep 2013. The Government intends to award one contract for one (1) contract line item number (CLIN) as follows: CLIN 0001 Quantity: 20 Unit: Ea Manufacturer: Globe Manufacturing LLC Part Number: 31882E FOB: Destination INSPECTION AND ACCEPTANCE: Destination DESIRED DELIVERY DATE: Four (4) Weeks ARO SIZING: On Site after award Description: Custom 31882E AXTN2 Alum GXTR Proximity Coat *CAL-OSHA, NFPA Labelled *All Standard Options of the AXTN:* -Aluminized Outer Shell -Aralite Thermal Liner -Stedair 3000 Moisture Barrier -Self Amteiral Mic Strap High on Right Chest -3"x3.5"S9" Radio Pocket on Left Chest w/ Antenna Notch -Self Material Elbow Reinforcement -PBI Hand and Wrist Guards -Grey Arashield Cuff Reinforcement -2 Snap Tabs at hem -Drag Rescue Device Quantity: 20 Unit: Ea Manufacturer: Globe Manufacturing LLC Part Number: 41882E FOB: Destination INSPECTION AND ACCEPTANCE: Destination DESIRED DELIVERY DATE: Four (4) Weeks ARO SIZING: On Site after award Description: Custom 41882E AXTN2 ALUM GXTR Proximity Pants *CAL - OSHA, NFPA Labelled *All Standard Options of the AXTN:* -Aralite Thermal Liner -Stedair 3000 Moisture Barrier -Removable Knees (Aluminized) -Grey Arashield Cuff Reinforcement -Waterproof DAM at Cuffs Quantity: 20 Unit: Ea Manufacturer: Globe Manufacturing LLC Part Number: 34777G FOB: Destination INSPECTION AND ACCEPTANCE: Destination DESIRED DELIVERY DATE: Four (4) Weeks ARO SIZING: On Site after award Description: Custom 34777G GXT75 Gold Adv Ultra GXTR Coat *All STD options of the GXTREME* -Dark Gold Advance Ultra Outer Shell -Caldura SL2 Thermal Liner -Crosstech Black Moisture Barrier -NYC Lime/Yellow Triple Trim -2"x3.5"x7" Radio Pocket on left chest w/ antenna notch on left side Left Side -1"x3" Self Mic Strap above radio pocket -Embroidered American Flag on right sleeve -Dragonhie Cuffs -2 snap tabs at hem -standard drag rescue device -separating liner system -antenna notch on radio pocket Quantity: 20 Unit: Ea Manufacturer: Globe Manufacturing LLC Part Number: 44777G FOB: Destination INSPECTION AND ACCEPTANCE: Destination DESIRED DELIVERY DATE: Four (4) Weeks ARO SIZING: On Site after award Description: CUSTOM 44777G GXT75 Gold Adv Ultra GXTR Pants *All STD options of the GXTREME* -Dark Gold Advance Ultra Outer Shell -Caldura SL2 Thermal Liner -Crosstech Black Moisture Barrier -3" Lime/Yellow Triple Trim around cuffs -Dragonhide Knees -Padded Knees -Dragonhide Cuffs -Separating Liner Systems -Padded H-Back Suspenders ADDITIONAL INFORMATION: The following provisions and clauses by reference apply to this procurement: FAR 52.212-1, Instructions to Offerors -- Commercial Items; FAR 52.204-7 -- System for Award Management; FAR 52.204-13 System for Award Management Maintenance (Jul 2013) FAR 52.212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items [in paragraphs (b) and (c) the following clauses apply: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3; 52.222-19; 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-13]; FAR 52.232-33 Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) FAR 52.232-39, Unenforceability of Unauthorized Obligations DFARS 247-7023 Alt III, Transportation of Supplies by Sea DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011), DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights; DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials; DFARS 252.204-7003, Control of Government Personnel Work Product; DFARS 252.204-7004, Alt A System for Award Management; DFARS 252.204-7011, Alternative Line Item Structure DFARS 252.211-7003, Item Identification and Valuation DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Jun 2012)]. DFARS 252.223-7008 Prohibition of Hexavalent Chromium; DFARS 252.225-7048, Export-Controlled Items DFARS 252.232-7010, Levies on Contract Payment; DFARS 252.243-7001, Pricing of Contract Modifications; The following provisions and clauses in full text apply to this procurement: DFARS 252.244-7000, Subcontracts for Commercial Items FAR 52.212-3 Alt I, Offeror Representations and Certifications -- Commercial Items An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically via https://www.sam.gov/portal/public/SAM. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management website, the offeror shall complete only paragraphs (c) through (o) of this provision FAR 52.252-1, Solicitation provisions incorporated by reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this address http://farsite.hill.af.mil/ FAR 52.252-2, Clauses Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address http://farsite.hill.af.mil/; DFARS 252.209-7997 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law. All offerors shall return a copy of the completed provision. Provision in full text is attached. 252.211-7003 Item Identification and Valuation. As prescribed in 211.274-6(a)(1), use the following clause: ITEM IDENTIFICATION AND VALUATION (JUN 2013) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing-Agency-Codes.htm. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Seialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ____. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (c) For each item delivered under a contract line, subline, or exhibit line item under paragraph (b) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report the Government's unit acquisition cost. (d) The Contractor shall submit the information required by paragraph (c) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (End of clause) 5352.201-9101 Ombudsman OMBUDSMAN (Nov 2012) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM, AFISRA ombudsmen, or AFNWC Ombudsmen: Ms Jeannine Kinder AFNWC/PK E-Mail: jeannine.kinder@kirtland.af.mil Phone: (505) 846-1924 Fax: (505) 846-0122 Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU, AFISRA level, or AFNWC level may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/377CONSKOC/F2K2AC3213A001/listing.html)
 

Place of Performance

Address: Kirtland AFB, New Mexico, 87120, United States

Zip Code: 87120
 

Record

SN03183259-W 20130913/130911235304-0809434654e37bd8300df7a98722e237 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |