Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 14, 2013 FBO #4312
MODIFICATION

34 -- GRINDING LINE SUPPLIES

Notice Date

9/12/2013
 

Notice Type

Modification/Amendment
 

Contracting Office

8875 Hidden River Parkway, Tampa, FL 33637
 

ZIP Code

33637
 

Solicitation Number

VA248-13-Q-2350
 

Response Due

8/14/2013
 

Archive Date

2/10/2014
 

Point of Contact

Name: Leslie Hawkins Jr, Title: Contract Specialist, Phone: 8136312806, Fax: 8139724522
 

E-Mail Address

leslie.hawkins2@va.gov;
 

Small Business Set-Aside

Total Small Business
 

Description

CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is VA248-13-Q-2350 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-69. The associated North American Industrial Classification System (NAICS) code for this procurement is 332721 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-08-14 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Tampa, FL 33612 The VHA NCO 08 - 673 - Tampa, FL requires the following items, Exact Match Only, to the following: LI 001: GRINDING LINE, 100 GRIT, 10PCS LOCAL STOCK NUMBER: 5-ST-161P66-2 -, 1, EA; LI 002: GRINDING LINE, 150 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P66-3 -, 1, EA; LI 003: POLISHING ARBOR, 200X75MM, W/CONICAL HOLE LOCAL STOCK NUMBER: 5-ST-161P85-T -, 1, EA; LI 004: SANDING SLEEVE FOR 161P85, 74MM X 190 MM, GRIT: K40 - 10PCS LOCAL STOCK NUMBER: 5-ST-161P86-40 -, 1, EA; LI 005: SANDING SLEEVE FOR 161P85, 74 MM X 190 MM, GRIT: K50 -10PCS LOCAL STOCK NUMBER: 5-ST-161P86-50 -, 1, EA; LI 006: SANDING SLEEVE FOR 161P85, 190 MM X 74 MM, GRIT: K80 -10 PCS LOCAL STOCK NUMBER: 5-ST-161P56-80 -, 1, EA; LI 007: SANDING SLEEVE FOR 161P85, 190 MM X 74 MM, GRIT: K100 - 10PCS LOCAL STOCK NUMBER: 5-ST-161P86-100 -, 1, EA; LI 008: FLAP WHEEL HOLDER, OUTER THREAD 5/8",INNER THREAD M6 LOCAL STOCK NUMBER: 5-ST-161P44-58 -, 1, EA; LI 009: POLISHING ARBOR, ROUNDED, 45 X 70 MM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P40A-45 -, 1, EA; LI 010: POLISHING ARBOR, ROUNDED, 60 X 90 MM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P40A-60 -, 1, EA; LI 011: POLISHING ARBOR LOCAL STOCK NUMBER: 5-ST-161P23A -, 1, EA; LI 012: SANDING CONE FOR 161P40-45, K40 - 6PCS LOCAL STOCK NUMBER: 5-ST-161P41-40 -, 1, EA; LI 013: SANDING CONE FOR 161P40-45, K80 - 6PCS LOCAL STOCK NUMBER: 5-ST-161P41-80 -, 1, EA; LI 014: SANDING CONE FOR 161P40,K40 - 6 PCS LOCAL STOCK NUMBER: 5-ST-161P42-40 -, 1, EA; LI 015: SANDING CONE FOR 161P40, K80 GRIT LOCAL STOCK NUMBER: 5-ST-161P42-80 -, 1, EA; LI 016: SHANK LOCAL STOCK NUMBER: 5-ST-165P22-58 -, 1, EA; LI 017: GRINDING LINE, 60 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P63-1 -, 1, EA; LI 018: GRINDING LINE, 100 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P63-2 -, 1, EA; LI 019: GRINDING LINE 150 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P63-3 -, 1, EA; LI 020: GRINDING LINE, 60 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P64-1 -, 1, EA; LI 021: GRINDING LINE, 100 GRIT, 10PCS LOCAL STOCK NUMBER: 5-ST-161P64-2 -, 1, EA; LI 022: GRINDING LINE, 150 GRIT, 10PCS LOCAL STOCK NUMBER: 5-ST-161P64-3 -, 1, EA; LI 023: GRINDING LINE, 60 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P65-1 -, 1, EA; LI 024: SANDING SLEEVES, 100 GRIT, 10 PER PACK LOCAL STOCK NUMBER: 5-ST-161P65-2 -, 1, EA; LI 025: GRINDING LINE, 150 GRIT, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P65-3 -, 1, EA; LI 026: GRINDING LINE, 60 GRIT, 10PCS LOCAL STOCK NUMBER: 50ST-161P66-1 -, 1, EA; LI 027: SANDING CONE FOR 161P52,K40 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P48-40 -, 1, EA; LI 028: SANDING CONE FOR 161P52, K60-10 PCS LOCAL STOCK NUMBER: 5-ST-161P48-60 -, 1, EA; LI 029: SANDING CONE FOR 161P52, K80-10 PCS LOCAL STOCK NUMBER: 5-ST-161P48-80 -, 1, EA; LI 030: SANDING CONE FOR 161P52, K100-10 PCS LOCAL STOCK NUMBER: 5-ST-161P48-100 -, 1, EA; LI 031: SANDING CONE FOR 161P52, K120-10 PCS LOCAL STOCK NUMBER: 5-ST-161P48-120 -, 1, EA; LI 032: SANDING SLEEVES FOR 161P47,K24 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-24 -, 1, EA; LI 033: SANDING SLEEVES FOR 161P47, K40 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-40 -, 1, EA; LI 034: SANDING SLEEVES FOR 161P47, K60-10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-60 -, 1, EA; LI 035: SANDING SLEEVES FOR 161P47, K80 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-80 -, 1, EA; LI 036: SANDING SLEEVES FOR 161P47-K100-10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-100 -, 1, EA; LI 037: SANDING SLEEVES FOR 161P47, K120 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P49-120 -, 1, EA; LI 038: SANDING SLEEVE, 100X100MM, FOR 161P51, GRIT 24, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P50-24 -, 1, EA; LI 039: SANDING SLEEVE, 100X100 MM, FOR 161P51, GRIT 40, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P50-40 -, 1, EA; LI 040: SANDING SLEEVE, 100X100MM, FOR 161P51, GRIT 80, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P50-80 -, 1, EA; LI 041: SANDING SLEEVE, 100X100MM, FOR 161P51, GRIT 120, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P50-120 -, 1, EA; LI 042: RASP HEAD, FINE, 100X50 MM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P4A-1 -, 1, EA; LI 043: SHANK LOCAL STOCK NUMBER: 5-ST-165P22-58 -, 1, EA; LI 044: FINE RASP, HSS 27X76 5/8" LOCAL STOCK NUMBER: 5-ST-161P56-A -, 1, EA; LI 045: SANDING SLEEVES FOR 161P45, G 40 - 10 PCS LOCAL STOCK NUMBER: 5-ST-161P46-40 -, 1, EA; LI 046: SANDING SLEEVES, 25X50 MM, FOR 161P45, GRIT K80,10 PCS LOCAL STOCK NUMBER: 5-ST-161P46-80 -, 1, EA; LI 047: SANDING SLEEVES FOR 161P45, GRIT K80, 10 PCS LOCAL STOCK NUMBER: 5-ST-161P46-120 -, 1, EA; LI 048: 1 SHELVING FOR SHEET MATERIAL STORAGE, SIZE 2500 X 2200 X 1100 MM LOCAL STOCK NUMBER: 5-ST-97M1 -, 7, EA; LI 049: 1 PLASTER WORK TABLE. DESCRIPTION: TABLE TOP WITH STAINLESS STEEL SHEET METAL COVER, CANTED SIDES PROVIDE FULL PROTECTION OF TABLE TOP. FRAME MADE OF STAINLESS STEEL SQUARE TUBING-LEFT SIDE BENEATH W LOCAL STOCK NUMBER: 5-ST-151M5 -, 3, EA; LI 050: 1 WORKBENCH, LEGS OUT OF STEEL, 40X40X2 MM, TOP WITH PARQUETED RED BEECH WOOD, LIFT SIDE: 150MM HEIGHT, RIGHT SIDE: 55MM HEIGHT, LOCKABLE, 1 SHELVE. LOCAL STOCK NUMBER: 5-ST-92M10-150 -, 5, EA; LI 051: TOOL BOARDS 457 X 1486 MM LOCAL STOCK NUMBER: 5-ST-93M11-1500 -, 1, EA; LI 052: TRAUTMAN FLOOR CARVER, SINGLE SPEED, 60HZ, 115V LOW MAINTENANCE, NO BRUSHES TO CHANGE, PRE-LUBRICATED AND SEALED BEARING FOR EXTENDED BEARING LIFE, DURABLE 1/2 HP BALDOR(R) MOTOR, MOTOR IS THERMALLY P LOCAL STOCK NUMBER: 6-2300/60 -, 1, EA; LI 053: CARVER LIFT ASSIST. ASSIST IN BOTH LIFTING AND LOWERING. EASY TO INSTALL, PROVIDES OVER 16" OF ADJUSTMENT, THRUST BEARING FOR EASE OF ROTATION. SHOCK PROVIDES SLAM-RESISTANT DAMPING AT THE END OF THE LOCAL STOCK NUMBER: 6-2100la -, 1, EA; LI 054: DUST COLLECTOR ATTACHMENT FOR TRAUTMAN, INFINITELY ADJUSTABLE, STEEL CONSTRUCTION, 4" EXHAUST FOR CONNENTION TO YOUR VACUUM SYSTEM. LOCAL STOCK NUMBER: 6-2100L -, 1, EA; LI 055: DUST COLLECTION HOSE KIT FOR 2100L, 4" DIAMETER CLEAR HOSE FOR VIEWING ANY OBSTRUCTION, 6' OF FLEXIBLE HOSE REACH, 2 WORM-DRIVE CLAMPS FOR CONNECTION INTERNAL ABRASION RESISTANT, ENCLOSED STEEL WIRE R LOCAL STOCK NUMBER: 6-226005 -, 1, EA; LI 056: AIR ATTACHMENT, FEATURES A FLAT AIR FLOW NOZZLE, FLEXIBLE STAY SET HOSE FOR ADJUSTABLE AIR STREAM. LOCAL STOCK NUMBER: 6-2100J -, 1, EA; LI 057: ANGLED ACCESSORY HOLDER FOR FLOOR CARVER, KEEPS YOU ACCESSORIES ORGANIZED AND VISIBLE. LOCAL STOCK NUMBER: 6-2100M -, 1, EA; LI 058: FOOT ON/OFF SWITCH FOR FLOOR OR BENCH CARVER, ALLOWS HANDS-FREE STOP AND START OPERATIONS FOR EXTRA SAFETY, CONVENIENCE, AND EFFICIENCY. LOCAL STOCK NUMBER: 6-2100K -, 1, EA; LI 059: TOOL BOARDS 457 X 1486 MM LOCAL STOCK NUMBER: 5-ST-93M11-1500 -, 4, EA; LI 060: 1 PARALLEL VICE WROUGHT STEEL, JAW WITH 160MM LOCAL STOCK NUMBER: 5-ST-76M1-160 -, 5, EA; LI 061: JET 414418 18 INCH METAL/WOOD VERT, BANDSAW, JET 414418 WOOD VERT BANDSAW FEATURES, EXCLUSIVE QUICK RELEASE, PRECISION T-SQUARE STYLE RIP FENCE. BUILT-IN CUTTING HEIGHT SCALE, LOWER BLADE WHEEL BRUSH LOCAL STOCK NUMBER: 6-JET414418 -, 1, EA; LI 062: 1 SCREWDRIVER SET LOCAL STOCK NUMBER: 5-ST-173P4/S, 5, EA; LI 063: PHILIPS HEAD SCREW DRIVER SET LOCAL STOCK NUMBER: 5-ST-173P5 -, 5, EA; LI 064: TOGGLE JOINT WIRE NIPPERS LOCAL STOCK NUMBER: 5-ST-171P9-180 -, 5, EA; LI 065: TOGGLE JOINT WIRE NIPPERS LOCAL STOCK NUMBER: 5-ST-171P9-210 -, 5, EA; LI 066: 1 TUBE HOLDER DIAMETER 30 MM FOR BENCH VICE LOCAL STOCK NUMBER: 5-ST-76M11-30 -, 5, EA; LI 067: 2 ROTARY PLATE FOR 76M1-140 AND 76M1-160 LOCAL STOCK NUMBER: 5-ST-76M2-2 -, 5, EA; LI 068: 1 GONIOMETER LOCAL STOCK NUMBER: 5-ST-163P15 -, 5, EA; LI 069: 2 SURFORM FILE FLAT LOCAL STOCK NUMBER: 5-ST-158P2-F -, 5, EA; LI 070: 3 SURFORM FILE HALF-ROUND LOCAL STOCK NUMBER: 5-ST-158P2-HR -, 5, EA; LI 071: 4 SURFORM FILE ROUND LOCAL STOCK NUMBER: 5-ST-158P2-R -, 5, EA; LI 072: 5 SURFORM FILE FLAT/FINE LOCAL STOCK NUMBER: 5-ST-158P20-F -, 5, EA; LI 073: 6 SURFORM FILE FLAT-FINE LOCAL STOCK NUMBER: 5-ST-158P21-F -, 12, EA; LI 074: 7 SURFORM REPLACEMENT BLADE LOCAL STOCK NUMBER: 5-ST-158P3-F -, 12, EA; LI 075: 8 SURFORM REPLACEMENT BLADE, HALF ROUND LOCAL STOCK NUMBER: 5-ST-158P3-HR -, 12, EA; LI 076: 9 SURFORM REPLACEMENT BLADE, ROUND LOCAL STOCK NUMBER: 5-ST-158P3-R -, 12, EA; LI 077: 10 REPLACEMENT BLADES FOR DEBURRING KNIFE, 10 PCS LOCAL STOCK NUMBER: 5-ST-160P25-E -, 1, EA; LI 078: 11 PHILLIPS SCREWDRIVER 10' LOCAL STOCK NUMBER: 6-6C243 -, 5, EA; LI 079: 12 SCARPA KNIFE, SMALL LOCAL STOCK NUMBER: 6-220461 -, 5, EA; LI 080: 13 PLUM BOB 8 OZ LOCAL STOCK NUMBER: 6-3UE19 -, 5, EA; LI 081: 14 THREAD ADAPTER, 5/8"/M16 LOCAL STOCK NUMBER: 5-ST-165P21-12 -, 1, EA; LI 082: 15 RASP HEAD, 85X30 MM, 5/8",#31 LOCAL STOCK NUMBER: 5-ST-161P5A-3 -, 1, EA; LI 083: 16 RASP HEAD, 55X33 MM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P5A-4 -, 1, EA; LI 084: 17 RASP HEAD 80X50 MM, 5/8",#33 LOCAL STOCK NUMBER: 5-ST-161P5A-2 -, 1, EA; LI 085: 18 RASP HEAD, 50 X 100MM, 5/8", MEDIUM CUT LOCAL STOCK NUMBER: 5-ST-161P5A-1 -, 1, EA; LI 086: 19 RASP HEAD, 30X105 MM, 5/8", PINE CONE SHAPE, MEDIUM CUT LOCAL STOCK NUMBER: 5-ST-161P5A-6 -, 1, EA; LI 087: 20 AUTOMATIC CENTER PUNCH LOCAL STOCK NUMBER: 6-3G833 -, 1, EA; LI 088: 21 PIN PUNCH SET LOCAL STOCK NUMBER: 6-4LB28 -, 1, EA; LI 089: 22 RUBBER MALLET LOCAL STOCK NUMBER: 5-ST-170P5 -, 5, EA; LI 090: 23 PLASTER MIXING BOWL, 1 1/4 PINT LOCAL STOCK NUMBER: 6-226084 -, 5, EA; LI 091: 24 SHOEMAKER'S HAMMER LOCAL STOCK NUMBER: 5-ST-170P6 -, 5, EA; LI 092: ROUND NOSE PLIERS LOCAL STOCK NUMBER: 5-ST-171P3-160 -, 5, EA; LI 093: FLAT NOSE PLIERS "LANGBECK" LOCAL STOCK NUMBER: 5-ST-171P4-160 -, 5, EA; LI 094: WAX PENCILS,BLACK, PK. 12 LOCAL STOCK NUMBER: 6-1JU74 -, 5, EA; LI 095: SAFETY EYE GLASSES LOCAL STOCK NUMBER: 6-1VW15 -, 5, EA; LI 096: CLEANING BRUSH LOCAL STOCK NUMBER: 6-1VAG7 -, 5, EA; LI 097: FLAT HEAD SCREW DRIVER LOCAL STOCK NUMBER: 6-6X089 -, 5, EA; LI 098: FLAT NOSE ADJUSTABLE PLIERS LOCAL STOCK NUMBER: 6-4CR39 -, 5, EA; LI 099: DIAGONAL CUTTING PLIERS LOCAL STOCK NUMBER: 6-5ME38 -, 5, EA; LI 100: 33 MEASURING TAPE LOCAL STOCK NUMBER: 5-ST-163P2 -, 5, EA; LI 101: WIRE BRUSH LOCAL STOCK NUMBER: 5-ST-178P25 -, 5, EA; LI 102: PIPE LOCAL STOCK NUMBER: 5-ST-155M1-120 -, 7, EA; LI 103: BRANCHING,ZINC-PLATED, ENTRANCE X WAY X EXIT: 120X120X120 MM LOCAL STOCK NUMBER: 5-ST-155M11-3 -, 3, EA; LI 104: BRANCHING ZINC-PLATED, ENTRANCE X WAY X, EXIT: 120X120X100MM LOCAL STOCK NUMBER: 5-ST-155M11-2 -, 1, EA; LI 105: SUCTION HOSE, PER MTR. LOCAL STOCK NUMBER: 5-ST-150M1-120 -, 3, EA; LI 106: SUCTION HOSE, FLEXIBLE WITH INSIDE SPIRAL OF SPRING STEEL, DIAMETER: 100MM, PER MTR. LOCAL STOCK NUMBER: 5-ST-150M1-100 -, 8, EA; LI 107: TOOL PEG, 10 LOCAL STOCK NUMBER: 5-ST-93M15-10 -, 5, EA; LI 108: TOOL PEG, 16 DIAMETER 5 - PCS LOCAL STOCK NUMBER: 5-ST-93M15-16 -, 5, EA; LI 109: TOOL PEG, 25 DIAMETER, 5-PCS LOCAL STOCK NUMBER: 5-ST-93M15-25 -, 5, EA; LI 110: TOOL PEG, 32 DIAMETER, 5-PCS LOCAL STOCK NUMBER: 5-ST-93M15-32 -, 5, EA; LI 111: DOUBLE HOOK, 60X50X60 LOCAL STOCK NUMBER: 5-ST-93M13-50 -, 5, EA; LI 112: DOUBLE HOOK, 60X75X60 MM LOCAL STOCK NUMBER: 5-ST-93M13-75 -, 5, EA; LI 113: MASTER HEAT GUN 300-500 F 120V LOCAL STOCK NUMBER: 6-224063 -, 5, EA; LI 114: ABRASIVE SHEET, 9X11, 180, Q LOCAL STOCK NUMBER: 6-1KUH9 -, 5, EA; LI 115: SPECIAL PLASTER KNIFE LOCAL STOCK NUMBER: 5-ST-160P9 -, 5, EA; LI 116: SKIVING KNIFE LOCAL STOCK NUMBER: 5-ST-160P16 -, 5, EA; LI 117: COBBLER'S KNIFE LOCAL STOCK NUMBER: 5-ST-160P19 -, 5, EA; LI 118: STEEL RULER LOCAL STOCK NUMBER: 5-ST-163P7-500 -, 5, EA; LI 119: RING-OPEN END SPANNER SET LOCAL STOCK NUMBER: 5-ST-165P72 -, 5, EA; LI 120: PIPE CUTTER LOCAL STOCK NUMBER: 5-ST-158P10 -, 5, EA; LI 121: GLUE CONTAINER 1.5 LITER LOCAL STOCK NUMBER: 5-ST-164P11-150 -, 5, EA; LI 122: BANDGE SCISSORS LOCAL STOCK NUMBER: 5-ST-166P12 -, 5, EA; LI 123: CONTOURING IRON, CHROME-STEEL, ROUND EDGES, 6+8MM LOCAL STOCK NUMBER: 5-ST-165P66 -, 5, EA; LI 124: CONTOURING IRON, CHROME-VANADIUM STEEL, ROUND EDGES, 7+9 MM LOCAL STOCK NUMBER: 5-ST-165P67 -, 5, EA; LI 125: DRAW KNIFE LOCAL STOCK NUMBER: 5-ST-160P10 -, 5, EA; LI 126: BALL END HEX KEY SET LOCAL STOCK NUMBER: 6-2CYC7 -, 5, EA; LI 127: BALL PEN HAMMER, 4 OZ LOCAL STOCK NUMBER: 6-3R478 -, 5, EA; LI 128: LONG NOSE PILERS LOCAL STOCK NUMBER: 6-4A842 -, 5, EA; LI 129: LOCKING PLIER SET, 2 PIECE LOCAL STOCK NUMBER: 6-4JA75 -, 5, EA; LI 130: DUST MASK, PK 20 LOCAL STOCK NUMBER: 6-3KP43 -, 5, EA; LI 131: CRESCENT WRENCH 10" LOCAL STOCK NUMBER: 6-12C209 -, 5, EA; LI 132: POLISHING ARBOR, 60/80, M16 LOCAL STOCK NUMBER: 5-ST-161P3 -, 2, EA; LI 133: SANDING DRUM: HABERMANN, DIAMETER: 45MM, LENGHT: 58 MM, THREAD: 5/8 LOCAL STOCK NUMBER: 5-ST-161P60A -, 1, EA; LI 134: SANDING DRUM: HABERMAN, DIAMETER: 60MM, LENGHT: 58MM, THREAD: 5/8" LOCAL STOCK NUMBER: 5-ST-161P60A-2 -, 1, EA; LI 135: SANDING DRUM: HABERMAN, DIAMETER: 60MM, LENGHT: 100MM, THREAD: 5/8" LOCAL STOCK NUMBER: 5-ST-161P60A -, 1, EA; LI 136: SANDING DRUM: HABERMAN, DIAMETER: 85MM, LENGHT: 100MM, THREAD: 5/8" LOCAL STOCK NUMBER: 5-ST-161P60A -, 1, EA; LI 137: RASP SPIRAL FLUTES (FIR CONE FORMED) FOR ALUMINUM AND PLASTICS, THREAD: 5/8", DIAMETER: 22MM, LENGTH: 36MM LOCAL STOCK NUMBER: 5-ST-161P58-A -, 1, EA; LI 138: RASP SPIRAL (FIR CONE FORMED) FOR ALUMINUM AND PLASTICS, THREAD: 5/8", DIAMETER: 22MM, LENGTH: 58MM LOCAL STOCK NUMBER: 5-ST-161P57-A -, 1, EA; LI 139: RASP, MEDIUM FOR WOOD + FOAMS, THREAD 5/8", DIAMETER: 22MM, LENGTH: 58MM LOCAL STOCK NUMBER: 5-ST-161P5A-5 -, 1, EA; LI 140: RASP HEAD, MEDIUM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P4A-2 -, 1, EA; LI 141: RASP HEAD, FINE 100X50 MM, 5/8" LOCAL STOCK NUMBER: 5-ST-161P4A-1 -, 1, EA; LI 142: RASP, FINE, 55X35 MM, 5/8", #46 LOCAL STOCK NUMBER: 5-ST-161P4A-4 -, 1, EA; LI 143: POLISHING ARBOR, 25X70, THREAD 5/8" LOCAL STOCK NUMBER: 5-ST-161P52-A -, 1, EA; LI 144: POLISHING ARBOR, 60X75, THREAD 5/8" LOCAL STOCK NUMBER: 5-ST-161P47-A -, 1, EA; LI 145: POLISHING ARBOR, 100X100, 5/8" LOCAL STOCK NUMBER: 5-ST-161P51-A -, 1, EA; LI 146: POLISHING ARBOR, 25 X 70, THREAD 5/8" LOCAL STOCK NUMBER: 5-ST-161P45-A -, 1, EA; LI 147: MEASURING TAPE LOCAL STOCK NUMBER: 5-ST-163P2 -, 5, EA; LI 148: TRIMMING SCISSORS, 210 MM LENGTH LOCAL STOCK NUMBER: 5-ST-166P40 -, 5, EA; LI 149: LEATHER SHEARS LOCAL STOCK NUMBER: 5-ST-166P1-240 -, 5, EA; LI 150: DEBURRING KNIFE, ADJUSTABLE, W/2 BLADES, LENGTH 230MM LOCAL STOCK NUMBER: 5-ST-160P25 -, 5, EA; LI 151: FOLDING RULE WOOD; WITH MM SCALE, LENGTH 2000 MM LOCAL STOCK NUMBER: 5-ST-163P1 -, 5, EA; LI 152: T - HANDLE HEX KEY, 4 MM LOCAL STOCK NUMBER: 5-ST-173P3-4 -, 5, EA; LI 153: T-HANDLE HEX KEY, 5 MM LOCAL STOCK NUMBER: 5-ST-173P3-5, 8, EA; LI 154: ALLEN KEY ST, 7-PART LOCAL STOCK NUMBER: 5-ST-173P2 -, 5, EA; LI 155: RIVET SETTER, 3MM LOCAL STOCK NUMBER: 5-ST--172P4-3 -, 5, EA; LI 156: RIVET SETTER, 4MM LOCAL STOCK NUMBER: 5-ST-172P4-4 -, 5, EA; LI 157: RIVET SETTER, 5MM LOCAL STOCK NUMBER: 5-ST-172P4-5 -, 5, EA; LI 158: TAPER PUNCH, 2MM LOCAL STOCK NUMBER: 5-ST-172P6-2 -, 5, EA; LI 159: TAPER PUNCH, 3MM LOCAL STOCK NUMBER: 5-ST-172P6-3 -, 5, EA; LI 160: TAPER PUNCH, 4MM LOCAL STOCK NUMBER: 5-ST-172P6-4 -, 5, EA; LI 161: CENTER PUNCH SET LOCAL STOCK NUMBER: 5-ST-172P5 -, 5, EA; LI 162: RIVIT HEADER LOCAL STOCK NUMBER: 5-ST-162P5-3 -, 5, EA; LI 163: RIVIT HEADER LOCAL STOCK NUMBER: 5-ST-162P5-4 -, 5, EA; LI 164: RIVET HEADER LOCAL STOCK NUMBER: 5-ST-162P5-5 -, 5, EA; LI 165: RIVET HEADER LOCAL STOCK NUMBER: 5-ST-162P5-6 -, 5, EA; LI 166: CARPET KNIFE LOCAL STOCK NUMBER: 5-ST-160P13 -, 5, EA; LI 167: COMBINATION PLIERS LOCAL STOCK NUMBER: 5-ST-171P1-160 -, 5, EA; LI 168: COMBINATION PLIERS LOCAL STOCK NUMBER: 50ST-171P1-180 -, 5, EA; LI 169: SIDE CUTTERS LOCAL STOCK NUMBER: 5-ST-171P6-160 -, 5, EA; LI 170: SIDE CUTTERS LOCAL STOCK NUMBER: 5-ST-171P6-180 -, 5, EA; LI 171: PIPE REAMER, INSIDE/OUTSIDE, FR DIAMETERS OF 8-35 MM LOCAL STOCK NUMBER: 5-ST-158P11 -, 5, EA; LI 172: PIPE CUTTER LOCAL STOCK NUMBER: 5-ST-158P10 -, 5, EA; LI 173: PROTECTIVE GLASSES, MIST-FREE LOCAL STOCK NUMBER: 5-ST-13P10 -, 5, EA; LI 174: HACKSAW FRAME WITH STEEL BOW, CLASSICAL WOODEN HANDLE, LENGTH 520MM LOCAL STOCK NUMBER: 5-ST-159P13 -, 5, EA; LI 175: FLOOR DRILL PRESS, 20 IN, 1HP, 115V, 15A FLOOR DRILL PRESS, SWING 20 IN, MOTOR HP 1, VOLTAGE 115, 15 AMPS AC, CAPACITY CAST IRON 3/4 IN. CAPACITY STEEL 3/4 IN SPINDLE SPEEDS 12, 150-4200 RPM, CHUCK SI LOCAL STOCK NUMBER: 6-1KEN7 -, 1, EA; LI 176: SCREWDRIVER BIT SET, 175 PIECES, SHANK SIZE 1/4 IN, ALLOY TOOL STEEL, FOR DRIVING HEAT TREATED SCREWS. SUCH AS SHEET METAL, SELF TAPPING AND SELF DRILLING SCREW WITH SCREWGUNS AND CORDLESS OR ELECTRI LOCAL STOCK NUMBER: 6-1VXP2 -, 1, EA; LI 177: DEWALT 2-TOOL 20-VOLT MAX-VOLT LITHIUM ION CORDLESS COMBO KIT, MODEL # DCK280C2-4 - DCF885 MAX 1/4" IMPACT DRIVER FEATURES 3 LED LIGHTS WITH A 20 SEC DELAY TO PROVIDE VISIBILITY WITHOUT SHADOWS, DCD78 LOCAL STOCK NUMBER: 6-254288 -, 2, EA; LI 178: HUSKY 22 IN. WIDE BODY TOOL BOX - FEATURES STURDY PLASTIC CONSTRUCTION. THIS TOOL BOX HAS A METAL LATCH AND IS LOCKABLE FOR SECURITY. THE INCLUDED TRAY HELPS TOOLS MAY ORGANIZED IN THE BOX AND THE BLA LOCAL STOCK NUMBER: 6-17191708 -, 4, EA; LI 179: THE ORIGINAL PINK BOX, KNOWN FOR BEING THE FIRST LINE OF PINK TOOL BOXES AND GARAGE STORAGE SOLUTIONS IN THE NORTH AMERICAN MARKETPLACE, CONTINUES ITS TRADITION OF DESIGNING AND MANUFACTURING THE MOST LOCAL STOCK NUMBER: 6-PB20MTB -, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, VHA NCO 08 - 673 - Tampa, FL intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. VHA NCO 08 - 673 - Tampa, FL is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. In addition to any VHA buy terms entered in FedBid, the Seller (Bidder) has reviewed and acknowledges any attached solicitation documents, item details, delivery schedule, and/or instructions to Seller (collectively referred to as requirements), and agrees to all terms and conditions set forth in the solicitation documents. While additional support documentation (e.g. Seller Attachments) may be requested, pricing shall be entered as a 'bid' in the reverse auction - offline pricing is not an acceptable bid. At the conclusion of the reverse auction, if attached to the buy, the apparent winning bidder shall be required to complete the solicitation documents prior to award. In addition to providing pricing at www.FedBid.com for this solicitation, each offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/TaVAMC673/TaVAMC673/VA248-13-Q-2350/listing.html)
 

Place of Performance

Address: Tampa, FL 33612

Zip Code: 33612-4745
 

Record

SN03185689-W 20130914/130912235631-85cb49ee4a1404d67256e71ab9e10528 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |