FBODaily.com | FedBizOpps: PRESOL | 69 | Diode Assembly Replacement for Dona Ana Base Camp Ranges at Fort Bliss,

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 14, 2013 FBO #4312
SOLICITATION NOTICE

69 -- Diode Assembly Replacement for Dona Ana Base Camp Ranges at Fort Bliss,

Notice Date: 9/12/2013
Notice Type: Combined Synopsis/Solicitation
NAICS: 335999 — All Other Miscellaneous Electrical Equipment and Component Manufacturing
Contracting Office: MICC - Fort Bliss, Directorate of Contracting, Attn: ATZC-DOC, Building 2021, Club Road, Fort Bliss, TX 79916-6812
ZIP Code: 79916-6812
Solicitation Number: W911SG-13-Q-001A
Response Due: 9/18/2013
Archive Date: 11/11/2013
Point of Contact: MICHAEL E. RIAS, (915) 568-7959
E-Mail Address: MICC - Fort Bliss
(michael.e.rias.civ@mail.mil)
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is W911SG-13-Q-001A same as above and is issued as a request for quotes. The Diode Assembly Replacement for Dona Ana Base Camp Ranges delivery must be provided by a single vendor. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-59 dated May 10, 2012. This requirement is Unrestricted. The North American Industry Classification System (NAICS) Code for this requirement is 335999, (All Other Miscellaneous Electrical Equipment and Component Manufacturing), with a corresponding Small Business Size standard of 500 Employees. The Mission Installation Contracting Command Fort Bliss, TX 79916 intends to award a firm-fixed price type contract. Requirements are as follows: CLIN 0001 - DIODE ASSY 4 each - DIODE ASSY Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0002 - DIODE ASSY 4 each - DIODE ASSY Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0003 - ACTUATOR ASSY 3 each - ACTUATOR ASSY Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0004 - ROD, BALL JOINT 20 each - ROD, BALL JOINT Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0005 - GEAR MOTOR ASSY 2 each - GEAR MOTOR ASSY Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0006 - HUB, TARGET 25 each - HUB, TARGET Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0007 - CCA, TMD 30 each - CCA, TMD Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0008 - CCA,DRC 30 each - CCA,DRC Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0009 - CCA, CHARGER 10 each - CCA, CHARGER Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0010 - CCA,24V/12V DC 2 each - CCA,24V/12V DC Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0011 - CCA, RS232/R485 10 each - CCA, RS232/R485 Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0012 - VCU CCA 5 each - VCU CCA Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0013 - TRANSISTOR 10 each - TRANSISTOR Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0014 - CIRCUIT BREAKER 2 each - CIRCUIT BREAKER Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0015 - CONTACTOR 6 each - CONTACTOR Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0016 - ELECTRONICS CONTROL UNIT MAT 3 each - ROD, BALL JOINT Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0017 - MULTI HIT SENSOR CCA 10 each - MULTI HIT SENSOR CCA Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0018 - DRIVE LIMIT HARNESS 3 each - DRIVE LIMIT HARNESS Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0019 - PROGRAMMING HARNESS 3 each - PROGRAMMING HARNESS Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0020 - ADDRESS SET CCA 3 each - ADDRESS SET CCA Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0021 - ELECTRONIC PANEL 3 each - ELECTRONIC PANEL Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0022 - TARGET LIFTER MOTOR ACTUATOR 3 each - TARGET LIFTER MOTOR ACTUATOR Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0023 - POTENTIOMETER CABLE ASSY 3 each - POTENTIOMETER CABLE ASSY Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0024 - TARGET LIFTER STRING POT 3 each - TARGET LIFTER STRING POT Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0025 - TARGET ARM HOLDER 18 each - TARGET ARM HOLDER Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0026 - MOUNT BEARING TARGET LIFTER 6 each - MOUNT BEARING TARGET LIFTER Delivery shall be F.O.B Destination - 20 October 2013 CLIN 0027 - TARGET ARM 5 each - TARGET ARM Delivery shall be F.O.B Destination - 20 October 2013 The following clauses apply to this acquisition: FAR 52.203-3, Gratuities FAR 52.204-7, Central Contractor Registration FAR 52.212-1, Instructions to Offerors, Commercial Items FAR 52.212-4, Contract Terms and Conditions-Commercial Items FAR 52.222-50, Combating Trafficking in Persons FAR 52.232-1, Payments FAR 52.233-4 Alt I, Applicable Law for Breach of Contract Claim FAR 52.252-1, Solicitation Provisions Incorporated by Reference FAR 52.252-2, Clauses Incorporated by Reference DFARS 252.204-7003, Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7004, Central Contractor Registration Alternate A DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions DFARS 252.232-7010 Levies on Contract Payments FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders - Commercial Items, and the following fill-in clauses in 52.212-5 also apply: FAR 52.219-6, 52.219-28, 52.222-3, 52.222-21, 52.222-26, 52.222-36, 52.222-40, 52.222-41, 52.222-42, 52.222-43, and 52.223-18; The following fill-in clauses in DFARS 252.225-7036. Clause 52.222-40 prescription states to insert in all solicitations and contract is, except acquisitions (under the SAT). FAR 52.222-43 prescription states it should be inserted when it is expected to be a fixed-price, time-and-materials, or labor-hour service contract. Please add 52.212-3 Offeror Representations and Certifications Commercial Item DFARS 252.212.301(f) 212.301 Solicitation provisions and contract clauses for the acquisition of commercial items. (f) The following additional provisions and clauses apply to DoD solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items. If the offeror has completed any of the following provisions listed in this paragraph electronically as part of its annual representations and certifications at https://www.acquisition.gov, the contracting officer shall consider this information instead of requiring the offeror to complete these provisions for a particular solicitation. (i) Use the FAR clause at 52.203-3, Gratuities, as prescribed in FAR 3.202, to comply with 10 U.S.C. 2207. (ii) Use the clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials, as prescribed in 203.171-4(a), to comply with section 847 of Pub. L. 110-181. (iii) Use the clause at 252.203-7003, Agency Office of the Inspector General, as prescribed in 203.1004(a), to comply with section 6101 of Pub. L. 110-252 and 41 U.S.C. 3509. (iv) Use the provision at 252.203-7005, Representation Relating to Compensation of Former DoD Officials, as prescribed in 203.171-4(b). W911SG-13-P-0422 Page 14 of 18 (v) Use the provision at 252.204-7011, Alternative Line Item Structure, as prescribed in 204.7109(b). (vi) Use the clause at 252.205-7000, Provision of Information to Cooperative Agreement Holders, as prescribed in 205.470, to comply with 10 U.S.C. 2416. (vii) Use the provision at 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist Country, as prescribed in 209.104-70(a), to comply with 10 U.S.C 2327(b). (viii) Use the clause at 252.211-7003, Item Identification and Valuation, as prescribed in 211.274-6(a)(1). (ix) Use the provision at 252.211-7006, Passive Radio Frequency Identification, as prescribed in 211.275-3. (x) Use the clause at 252.211-7007, Reporting of Government-Furnished Property, as prescribed in 211.274-6. (xi) Use the provisions at 252.215-7007, Notice of Intent to Resolicit, and 252.215-7008, Only One Offer, as prescribed in 215.408(3) and (4), respectively. (xii) Use the clause at 252.219-7003, Small Business Subcontracting Plan (DoD Contracts), as prescribed in 219.708(b)(1)(A)(1), to comply with 15 U.S.C. 637. Use the clause with its Alternate I when prescribed in 219.708(b)(1)(A)(2). (xiii) Use the clause at 252.219-7004, Small Business Subcontracting Plan (Test Program), as prescribed in 219.708(b)(1)(B), to comply with 15 U.S.C. 637 note. (xiv) Use the clause at 252.223-7008, Prohibition of Hexavalent Chromium, as prescribed in 223.7306. (xv) Use the provision at 252.225-7000, Buy American-Balance of Payments Program Certificate, as prescribed in 225.1101(1)(i), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act. Use the provision with its Alternate I as prescribed in 225.1101(1)(ii). (xvi) Use the clause at 252.225-7001, Buy American and Balance of Payments Program, as prescribed in 225.1101(2)(i), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy- American Act. Use the clause with its Alternate I as prescribed in 225.1101(2)(ii). (xvii) Use the clause at 252.225-7008, Restriction on Acquisition of Specialty Metals, as prescribed in 225.7003-5(a)(1), to comply with 10 U.S.C. 2533b. (xviii) Use the clause at 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, as prescribed in 225.7003-5(a)(2), to comply with 10 U.S.C. 2533b. (xix) Use the provision at 252.225-7010, Commercial Derivative Military Article-Specialty Metals Compliance Certificate, as prescribed in 225.7003-5(b), to comply with 10 U.S.C. 2533b. (xx) Use the clause at 252.225-7012, Preference for Certain Domestic Commodities, as prescribed in 225.7002-3(a), to comply with 10 U.S.C. 2533a. W911SG-13-P-0422 Page 15 of 18 (xxi) Use the clause at 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools, as prescribed in 225.7002-3(b), to comply with 10 U.S.C. 2533a. (xxii) Use the clause at 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings, as prescribed in 225.7009-5, to comply with section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts. (xxiii) Use the clause at 252.225-7017, Photovoltaic Devices, as prescribed in 225.7017-4(a), to comply with section 846 of Pub. L. 111-383. (xxiv) Use the provision at 252.225-7018, Photovoltaic Devices-Certificate, as prescribed in 225.7017-4(b), to comply with section 846 of Pub. L. 111-383. (xxv) Use the provision at 252.225-7020, Trade Agreements Certificate, to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (A) Use the basic provision as prescribed in 225.1101(5)(i), (B) Use the provision with its Alternate I as prescribed in 225.1101(5)(ii). (xxvi) Use the clause at 252.225-7021, Trade Agreements to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (A) Use the basic clause as prescribed in 225.1101(6)(i). (B) Use the clause with its Alternate I as prescribed in 225.1101(6)(ii). (C) Use the clause with its Alternate II as prescribed in 225.1101(6)(iii). (xxvii) Use the provision at 252.225-7022, Trade Agreements Certificate - Inclusion of Iraqi End Products, as prescribed in 225.1101(7), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (xxviii) Use the provision at 252.225-7023, Preference for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(a), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (xxix) Use the clause at 252.225-7024, Requirement for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(b), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (xxx) Use the clause at 252.225-7026, Acquisition Restricted to Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(c), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (xxxi) Use the clause at 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales, as prescribed in 225.7307(a), to comply with 22 U.S.C. 2779. (xxxii) Use the clause at 252.225-7028, Exclusionary Policies and Practices of Foreign Governments, as prescribed in 225.7307(b), to comply with 22 U.S.C. 2755. (xxxiii) Use the provision at 252.225-7031, Secondary Arab Boycott of Israel, as prescribed in 225.7605, to comply with 10 U.S.C. 2410i. W911SG-13-P-0422 Page 16 of 18 (xxxiv) Use the provision at 252.225-7035, Buy American-Free Trade Agreements-Balance of Payments Program Certificate, to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (A) Use the basic provision as prescribed in 225.1101(10)(i). (B) Use the provision with its Alternate I as prescribed in 225.1101(10)(ii). (C) Use the provision with its Alternate II as prescribed in 225.1101(10)(iii). (D) Use the provision with its Alternate III as prescribed in 225.1101(10)(iv). (E) Use the provision with its Alternate IV as prescribed in 225.1101(10)(v). (F) Use the provision with its Alternate V as prescribed in 225.1101(10)(vi). (xxxv) Use the clause at 252.225-7036, Buy American--Free (B) Trade Agreements-- Balance of Payments Program to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181). (A) Use the basic clause as prescribed in 225.1101(11)(i)(A). (B) Use the clause with its Alternate I as prescribed in 225.1101(11)(i)(B). (C) Use the clause with its Alternate II as prescribed in 225.1101(11)(i)(A). (D) Use the clause with its Alternate III as prescribed in 225.1101(11)(i)(B). (E) Use the clause with its Alternate IV as prescribed in 225.1101(11)(i)(C). (F) Use the clause with its Alternate V as prescribed in 225.1101(11)(i)(C). (xxxvi) Use the provision at 252.225-7037, Evaluation of Offers for Air Circuit Breakers, as prescribed in 225.7006-4(a), to comply with 10 U.S.C. 2534(a)(3). (xxxvii) Use the clause at 252.225-7038, Restriction on Acquisition of Air Circuit Breakers, as prescribed in 225.7006-4(b), to comply with 10 U.S.C. 2534(a)(3). (xxxviii) Use the clause at 252.225-7039, Contractors Performing Private Security Functions, as prescribed in 225.370-6, to comply with section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383. (xxxix) Use the clause at 252.225-7040, Contractor Personnel Authorized to Accompany U.S. Armed Forces Deployed Outside the United States, as prescribed in 225.7402-5(a). (xl) Use the clause at 252.225-7043, Antiterrorism/Force Protection Policy for Defense Contractors Outside the United States, as prescribed in 225.7403-2. (xli) Use the clause at 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns, as prescribed in 226.104, to comply with section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts. (xlii) Use the clause at 252.227-7013, Rights in Technical Data-Noncommercial Items, as prescribed in 227.7103-6(a). Use the clause with its Alternate I as prescribed in 227.7103- W911SG-13-P-0422 Page 17 of 18 6(b)(1). Use the clause with its Alternate II as prescribed in 227.7103-6(b)(2), to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq. (xliii) Use the clause at 252.227-7015, Technical Data-Commercial Items, as prescribed in 227.7102-4(a)(1), to comply with 10 U.S.C. 2320. Use the clause with its Alternate I as prescribed in 227.7102-4(a)(2), to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq. (xliv) Use the clause at 252.227-7037, Validation of Restrictive Markings on Technical Data, as prescribed in 227.7102-4(c). (xlv) Use the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, as prescribed in 232.7004, to comply with 10 U.S.C. 2227. (xlvi) Use the clause at 252.232-7009, Mandatory Payment by Governmentwide Commercial Purchase Card, as prescribed in 232.1110. (xlvii) Use the clause at 252.232-7010, Levies on Contract Payments, as prescribed in 232.7102. (xlviii) Use the clause at 252.232-7011, Payments in Support of Emergencies and Contingency Operations, as prescribed in 232.908. (xlix) Use the clause at 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel, as prescribed in 237.173-5, to comply with section 1038 of Pub. L. 111-84. (l) Use the clause at 252.237-7019, Training for Contractor Personnel Interacting with Detainees, as prescribed in 237.171-4, to comply with section 1092 of Pub. L. 108-375. (li) Use the clause at 252.243-7002, Requests for Equitable Adjustment, as prescribed in 243.205-71, to comply with 10 U.S.C. 2410. (lii) Use the clause at 252.244-7000, Subcontracts for Commercial Items, as prescribed in 244.403. (liii) Use the clause at 252.246-7003, Notification of Potential Safety Issues, as prescribed in 246.371(a). (liv) Use the clause at 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations, as prescribed in 246.270-4, to comply with section 807 of Pub. L. 111-84. (lv) Use the clause at 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer, as prescribed in 247.207, to comply with section 884 of Pub. L. 110-417. (lvi) Use the provision at 252.247-7022, Representation of Extent of Transportation by Sea, as prescribed in 247.574(a). (lvii) Use the clause at 252.247-7023, Transportation of Supplies by Sea, as prescribed in 247.574(b)(1), to comply with the Cargo Preference Act of 1904 (10 U.S.C. 2631(a)). Use the clause with its Alternate I as prescribed in 247.574(b)(2). Use the clause with its Alternate II as prescribed in 247.574(b)(3). Use the clause with its Alternate III as prescribed in 247.574(b)(4). (lviii) Use the clause at 252.247-7024, Notification of Transportation of Supplies by Sea, as prescribed in 247.574(c). (lix) Use the clause 252.247-7025, Reflagging or Repair Work, as prescribed in 247.574(d), to comply with 10 U.S.C. 2631(b). W911SG-13-P-0422 Page 18 of 18 (lx) Use the provision at 252.247-7026, Evaluation Preference for Use of Domestic Shipyards - Applicable to Acquisition of Carriage by Vessel for DoD Cargo in the Coastwise or Noncontiguous Trade, as prescribed in 247.574(e), to comply with section 1017 of Pub. L. 109- 364. (lxi) Use the clause at 252.247-7027, Riding Gang Member Requirements, as prescribed in 247.574(f), to comply with section 3504 of the National Defense Authorization Act for Fiscal Year 2009 (Pub. L. 110-417). (lxii) Use the clause at 252.247-7028, Application for U.S Government Shipping Documentation/Instructions, as prescribed in 247.207. The full text of these provisions and clauses may be obtained by accessing http://www.acq.osd.mil/dpap/dars/index.html or http://www.arnet.gov The following Local Clause also applies: 5152.233-4000, AMC-Level Protest Program (Nov 2008) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.10. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapel Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number (703) 806-8866 or 8875 Packages sent by FedEx or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. (End of Provision) The offeror must be actively registered in the System for Award Management Registration to be considered for award. The website is http://www.sam.gov. Instructions to Offerors: Offerors shall submit by e-mail: (1) A complete proposal using pricing schedule above (see CLIN 0001 thru CLIN 0005). Failure to fully complete the provided pricing schedule will cause an offerors proposal to be deemed nonresponsive. Proposals are due by 18 September 2013, 9:00 a.m. MST and must be emailed to michael.e.rias.civ@mail.mil. Offers will be evaluated in accordance with 52.212-2 Evaluation - - Commercial Items (a) The Government will award one contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation is determined to be the lowest price technically acceptable (LPTA) proposal with acceptable past performance. The following factors shall be used to evaluate offers: (1) Price. (2) Technical capability of the items to meet the Government's requirements as listed above. (3) Past Performance. A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision).
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/8b8984208bd3f59b71e99d542d8016b6)
Place of Performance: Address: MICC - Fort Bliss Directorate of Contracting, Attn: ATZC-DOC, Building 2021, Club Road Fort Bliss TX; Zip Code: 79916-6812
Record: SN03186200-W 20130914/130913000057-8b8984208bd3f59b71e99d542d8016b6 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

69 -- Diode Assembly Replacement for Dona Ana Base Camp Ranges at Fort Bliss,