SOLICITATION NOTICE
99 -- Promotional Items
- Notice Date
- 9/18/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 1001 761st Tank Bat, Fort Hood, TX 76544
- ZIP Code
- 76544
- Solicitation Number
- W91151-13-T-0441
- Response Due
- 9/23/2013
- Archive Date
- 3/22/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Woman Owned Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91151-13-T-0441 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-69. The associated North American Industrial Classification System (NAICS) code for this procurement is 339950 with a small business size standard of 500.00 employees.This requirement is an [ Women-Owned Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-09-23 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Vicksburg, MS 39180 The MICC Fort Hood requires the following items, Meet or Exceed, to the following: LI 001: Brass Bullet Laser Pointer, 7/16" x 3 1/4" black imprint imprinted with 5 different unit crest, see specifications for unit crests., 125, EA; LI 002: Cargo Rucksack 20" x 14" x 7 1/2", constructed of 600 denier polyester with vinyl backing. Large main compartment with drawstring opening. Front accessory pocket, side zippered pocket, side mesh water bottle holder and back support belt with parachute clasps. Imprint will be in black Imprinted with 1 unit crest, see specification for unit crest, 30, EA; LI 003: Sling bag, constructed of 600 denier polyester with vinyl backing, large main storage compartment, plush lined front organizer pocket with headphone port, two front zippered pockets, extra wide padded adjustable sling strap, cell phone holder and fully padded handle. 21 1/14" x 14 1/2" x 7" Imprinted with 1 unit crest, see specification for unit crest, 30, EA; LI 004: Pens, Bullet imprint in black with 5 different unit crests, see specifications for unit crests, 800, EA; LI 005: Pencils, Bullet imprint in black with 5 different unit crests, see specifications for unit crests, 500, EA; LI 006: Wobbly stress reliever, Soft polyurethane stress reliever with a weighted base, magnet in head holds paper clips. 4 1/4"H x 2 1/8" diameter. imprinted with 5 different unit crest, see specifications for unit crests., 400, EA; LI 007: Knife, 3" lock back knife with digital camouflage pattern with 5 different unit crests, see specifications for unit crests, 250, EA; LI 008: 1"-3" Ring Padfolio with handle on spine and zipper closure, Deboss, Foldier size 14 1/2" x 11' Hx 2"D imprinted with 5 different unit crest, see specifications for unit crests., 150, EA; LI 009: Junior Padfolio with zipper, Closure and Calculator Deboss Size 6 1/2" Wide and 9 1/2" High imprinted with 5 different unit crest, see specifications for unit crests., 150, EA; LI 010: Wallet, tri fold constructed of 600 Denier polyester camo material, multiple storage pockets and compartment, 2 ID windows and zippered challenge coin display, imprint will be in black Imprinted with 1 unit crest, see specification for unit crest, 30, EA; LI 011: Backpack, 3 day stretch, size 20 1/2" x 15" x 7 3/4" Volume 3920 cubic inches, constructed of 600 denier polyester with vinyl backing, large expandable main packing compartment, organizer pocket, side parachute clasps, easy grip zipper pulls and back support belt with parachute clasps, imprint will be in black Imprinted with 1 unit crest, see specification for unit crest, 50, EA; LI 012: Computer Bag, 13 1/2" X 16" x 8" computer backpack Volume is 1728 Cubic inches. Constructed of 600 denier polyester, front zippered organizer and gusset file pockets, two sided zippered guesset pockets, large heavily padded main compartment, zippered mesh and accessory pockets in dome and detachable/adjustable shoulder strap with luggage tag. imprint will be in black. Imprinted with 1 unit crest, see specification for unit crest, 30, EA; LI 013: Tolierty Kit, 10" x 10" x 5", volume is 500 cubic inches, constructe of 600 denier polyester, zippered outside pocket on front flap, metal hook for hanging kit, inside zippered mesh pocket in main compartment and zippered pocket in bottom of kit. Imprint will be in black, ACU pattern. Imprinted with 1 unit crest, see specification for unit crest, 30, EA; LI 014: Globe key tags, black imprint imprinted with 5 different unit crest, see specifications for unit crests., 325, EA; LI 015: Digital Tire Gauge, LCD backlit, Measures up to 100 PSI or 6.9 BAR, black imprint imprinted with 5 different unit crest, see specifications for unit crests., 250, EA; LI 016: Sewing Kit, Prethreaded fold up with black imprint imprinted with 5 different unit crest, see specifications for unit crests., 500, EA; LI 017: Cooler, Flip Flap insulatied cooler bags, Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 125, EA; LI 018: Umbrella Auto-Open Folding, 44" Arc Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 125, EA; LI 019: Stress Relievers, Hard hat, Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 500, EA; LI 020: Stress Relievers, Apple, Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 500, EA; LI 021: Head Wrap, Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 250, EA; LI 022: Carabiner with key ring, white imprint imprinted with 5 different unit crest, see specifications for unit crests., 500, EA; LI 023: LED Torch key light, Black imprint imprinted with 5 different unit crest, see specifications for unit crests., 600, EA; LI 024: 8' 4 sided table throw, 1 will be black and 1 will be red, Imprinted with 1 unit crest, see specification for unit crest, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Hood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Hood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer's name and part numbers AND salient characteristics of the items you are proposing to sell to the Government. Regardless of the terminology used in each RFQ ("Brand Name or Equal", or "meet minimum stated specifications), the information describing what you are offering must be physically written into the seller's bid specification block. Salient characteristics are defined as "pronounced features of an item that identify it describe its size and composition, functional intent, and/or operational capabilities or limits." When researching product capabilities, you must, as a minimum, respond with feature for feature comparisons in order for your product to be technically evaluated for sufficiency. Responses such as "bidding exact match", "as specified", or cutting and pasting the Government's specification information into the seller's bid specification block are not acceptable responses. Offerors who respond in any of the three examples directly above will be eliminated from the competition without consideration of their offer. If you are bidding the same product as is being requested, your seller bid specification should indicate: "Bidding on Manufacturer (Insert Name) and Part Number (Insert Number). If you are bidding on an "or equal" product, your seller bid specification must state: Bidding on Manufacturer (Insert Name) and Part Number (Insert Number), containing the following salient characteristics (insert salient characteristics). If your response does not contain all of the required information called out in this notice, your quote will be determined nonresponsive and will not be considered for award. The apparent awardee shall acknowledge acceptance of any and all re-postings (amendments), in writing, prior to any award resulting from this solicitation. The applicable NAICS code for this procurement is 323111 with the related size standard of 500 employees. The NAICS code identified herein must appear in FAR 52.212-3 "Offeror Representations and Certifications" in SAM and the vendor must be actively registered in that NAICS Prior to Award to be considered for any resulting contract. Failure to be properly registered at the time and date of award may render the quote non-responsive. Fedbid is a mechanism used by this office to solicit for common use commercial items in accordance with FAR 13.5. Fedbid is NOT a forum for filing protests against the Government. Attempts to file protests through Fedbid will not be considered legitimate as they do not conform to the requirements in the Federal Acquisition Regulation (FAR). It is preferable that disputes and protests be resolved as quickly as possible at the lowest level possible before considering the more formal process described below. Interested parties wishing to file an agency protest directly with the Contracting Officer responsible for this acquisition should review the procedures at FAR Part 33 and send your protest to LTC Robert Mathews, at robert.s.mathews.mil@mail.mil. Interested parties wishing to file an agency protest must abide by the provisions in FAR Part 33, Protests, Disputes, and Appeals. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC, as an Alternate Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.10. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. The address for filing a protest directly with AMC is: HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA 22060-5527; Facsimile number (703) 806-8866 or 8875. Packages sent Federal Express or UPS should be addressed to: HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA 22060-5527. The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the HQ, AMC to obtain the AMC-Level Protest procedures. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Contractor shall NOT make partial line item shipments against any resulting purchase order/contract issued as a result of this solicitation; e.g., if a line item on the contract reads - Computer, 10 each, the contractor shall NOT ship 3 computers on one shipment and 7 computers on a second shipment. Failure to adhere to this requirement will result in invoices being rejected in WAWF and/or a delay in payment for non-conforming shipped quantities. SAM Requirement - Company must be registered on System for Award Management (SAM) before an award could be made to them. If company is not registered in SAM, they may do so by going to SAM web site at http://www.sam.gov Proposed responders must submit any questions concerning this solicitation before 19 Sept 2013, 1000am CST, to reasonably expect a response from the Government. Those questions not received within the prescribed date will not be considered. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) Bid MUST be good for 90 days, after submission. No partial bids will be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/836e888178914a62e5977e1f0a145770)
- Place of Performance
- Address: Vicksburg, MS 39180
- Zip Code: 39180-5790
- Zip Code: 39180-5790
- Record
- SN03193966-W 20130920/130919000101-836e888178914a62e5977e1f0a145770 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |