MODIFICATION
63 -- CCTV Surveillance System (SOLICITATION)
- Notice Date
- 9/23/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- MICC, DOC - Fort Benning, Fort Benning, GA 31905
- ZIP Code
- 31905
- Solicitation Number
- 0010373509
- Response Due
- 9/24/2013
- Archive Date
- 3/23/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010373509 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-69. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-09-24 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be FT Benning, GA 31905 The MICC Fort Benning requires the following items, Brand Name or Equal, to the following: LI 001: Network video recorder 21TB - Manufacturer Avigilon - Part #21.0TB-HD-NVR2, 1, EA; LI 002: NVR redundant power supply - Manufacturer Avigilon - Part #HD-NVR2-2nd-PS, 5, EA; LI 003: Network video recorder 10TB - Manufacturer Avigilon - Part #10.0TB-HD-NVR2, 4, EA; LI 004: Dome Camera 2mp high definition - Manufacturer Avigilon - Part #2.0-H3-D01-IR, 44, EA; LI 005: PTZ Camera 2MP High Definition - Manufacturer Avigilon - Part #2.0W-H3PTZ-DP20, 5, EA; LI 006: PTZ camera wall mount bracket - Manufacturer Avigilon - Part #MNT-PEND-WALL, 5, EA; LI 007: PTZ camera POE injector- Manufacturer Avigilon - Part #S1P, 5, EA; LI 008: Server camera license 16 POE injector - Manufacturer Avigilon - Part #16C-HD-NVMS-ENT, 1, EA; LI 009: Server camera license 4 - Manufacturer Avigilon- Part #4C-HD-NVMS-ENT, 8, EA; LI 010: Server camera license 1 - Manufacturer Avigilon - Part #1C-HD-NVMS-ENT, 4, EA; LI 011: Server gateway license - Manufacturer Avigilon - Part #GATE-HD-NVMS-ENT, 5, EA; LI 012: IP encoder 4 channel - Manufacturer Avigilon- Part #ENC-4P-H264, 5, EA; LI 013: Encoder rack mount - Manufacturer Avigilon - Part #ENC-BRK-1U, 5, EA; LI 014: 24 port POE switch - Manufacturer Avigilon - Part #S24, 5, EA; LI 015: APC Smart-UPS 1500VA LCD RM 2u Rack Mounted - Manufacturer APC - Part #SMT1500RM2U, 5, EA; LI 016: Wall mounted rack cabinet - Manufacturer Atlas Soundolier - Part #WMA-10-23, 5, EA; LI 017: Cabinet door - Manufacturer Atlas Soundolier - Part #SFD10, 5, EA; LI 018: Cabinet rails - Manufacturer Atlas Soundolier - Part #WMA-RR10, 5, EA; LI 019: Cabinet power conditioner - Manufacturer Furman - Part #PL-8C, 5, EA; LI 020: Fiber Ethernet media converter - Manufacturer Interlogix - Part #IF-DE7230M, 5, EA; LI 021: Installation Materials, 1, Lot; LI 022: Design, Installation and Commissioning Labor, 1, Lot; LI 023: Freight, 1, Lot; LI 024: 3mp bullet camera IR (River walk) - Manufacturer Avigilon - Part #3.0W-H3-B01-IR, 2, EA; LI 025: Field Power Supply (River walk)- Manufacturer Altronix - Part #AL1012ULACM, 1, EA; LI 026: Battery for power supply - Vendor's Part Number, 1, EA; LI 027: NVR upgrade ACP-2 - Manufacturer Avigilon - No Part # provided, 1, EA; LI 028: Server camera license 1 - Manufacturer Avigilon - Part #1C-HD-NVMS-ENT, 2, EA; LI 029: Fiber Ethernet media converter - Manufacturer Interlogix - Part #IF-DE7230M, 4, EA; LI 030: Installation, 1, Lot; LI 031: Design, installation/commissioning labor, 1, Lot; LI 032: Freight, 1, Lot; LI 033: IMPORTANT INFORMATION: THIS REQUIREMENT INVOLVES INSTALLATION, EXCAVATION, DIGGING, ETC. THE REQUIRED SUPPLY ITEMS ARE INDICATED ABOVE. ALL INTERESTED CONTRACTORS MUST REVIEW AND UNDERSTAND THE PERFORMANCE WORK STATEMENT (ATTACHED) AND THE LABOR AND INSTALLATION THAT IS REQUIRED FOR THIS PROJECT. SUCCESSFUL CONTRACTOR MUST BE ABLE TO SUPPLY CAMERA ITEMS AND PERFORM ALL OF THE NECESSARY LABOR ASSOCIATED WITH THE INSTALLATION. THE GOVERNMENT WILL AWARD A CONTRACT RESULTING FROM THIS SOLICITATION TO THE RESPONSIBLE QUOTER WHOSE QUOTE CONFORMING TO THE SOLICITATION AND PERFORMANCE WORK STATEMENT WILL BE MOST ADVANTAGIOUS TO THE GOVERNMENT, PRICE AND OTHER FACTORS CONSIDERED., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Benning is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this aquisition. The selected Offeror must comply with the following commercial item terms and conditions: FAR 52.209-5, Certification Regarding Responsibility Matters and FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. Submission of Offers in the English Language The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, considering price alone. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 Item Identification and Valuation (JUN 2005); 252.246-7000 Material Inspection and receiving Report New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be valid for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order. Partial shipments are authorized however, payment will not be made until all items have been accepted and received by the requiring activity. Payment terms shall be net 30 unless otherwise agreed to by MICC Fort Benning. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must-- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by-- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. All questions pertaining to this requirement are to be directed to the Contract Specialist no later than 24 September 2013 at 10:00 a.m. ET. As prescribed in 19.304(a), insert the following provision: SMALL BUSINESS CONCERN REPRESENTATION (FEB 1990) (a) Representation. The offeror represents and certifies as part of its offer that it [ ] is, [ ] is not a small business concern and that [ ] all, [ ] not all end items to be furnished will be manufactured or produced by a small business concern in the United States, its territories or possessions, Puerto Rico or the Trust Territory of the Pacific Islands. (b) Definition. 'Small business concern,' as used in this provision, means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation. (c) Notice. Under 15 U.S.C.645(d), any person who misrepresents a firm's status as a small business concern in paragraph (a) of this clause in order to obtain a contract to be awarded under the preference programs established pursuant to sections 8(a),8(d),9, or 15 of the Small Business Act or any other provision of Federal law that specifically references section 8(d) for a definition of program eligibility, shall (1) be punished by imposition of a fine, imprisonment, or both; (2) be subject to administrative remedies and (3) be ineligible for participation in programs conducted under the authority of the Act. (End of provision) (a) Definitions. As used in this clause-- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority. Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c)of this clause. (b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following: (1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract. (2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract. As prescribed in 19.508(c), insert the following clause in solicitations and contracts involving total small business set-asides: NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (APR 1984) (a) Definition. 'Small business concern,' as used in this clause, means a concern including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation. (b) General. (1) Offers are solicited only from small business concerns. Offers received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected. (2) Any award resulting from this solicitation will be made to a small business concern. (c) Agreement. A manufacturer or regular dealer submitting an offer in its own name agrees to furnish, in performing the contract, only end items manufactured or produced by small business concerns inside the United States, its territories and possessions, the Commonwealth of Puerto Rico, the Trust Territory of the Pacific Islands, or the District of Columbia. However, this requirement does not apply in connection with construction or service contracts. (End of clause) (R 7-2003.2 1972 JUL) (R 1-1.706-5(e)) (a) It is the policy of the United States that small business concerns, veteran-owned small business concerns, service-disabled veteran-owned small business concerns, HUBZone small business concerns, small disadvantaged business concerns, and women-owned small business concerns shall have the maximum practicable opportunity to participate in performing contracts let by any Federal agency, including contracts and subcontracts for subsystems, assemblies, components, and related services for major systems. It is further the policy of the United States that its prime contractors establish procedures to ensure the timely payment of amounts due pursuant to the terms of their subcontracts withsmall business concerns, veteran-owned small business concerns, service-disabled veteran-owned small business concerns, HUBZone small business concerns, small disadvantaged business concerns, and women-owned small business concerns. (b) The Contractor hereby agrees to carry out this policy in the awarding of subcontracts to the fullest extent consistent with efficient contract performance. The Contractor further agrees to cooperate in any studies or surveys as may be conducted by the United States Small Business Administration or the awarding agency of the United States as may be necessary to determine the extent of the Contractor's compliance with this clause.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/5c0e489736ae7db3373f9367187f7a53)
- Place of Performance
- Address: FT Benning, GA 31905
- Zip Code: 31905
- Zip Code: 31905
- Record
- SN03198450-W 20130925/130923235115-5c0e489736ae7db3373f9367187f7a53 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |