SOURCES SOUGHT
A -- Request for Information (RFI) for Joint Project Manager for Protection (JPM P) Joint Service Equipment Wipe (JSEW)
- Notice Date
- 9/27/2013
- Notice Type
- Sources Sought
- NAICS
- 325998
— All Other Miscellaneous Chemical Product and Preparation Manufacturing
- Contracting Office
- ACC-APG - Natick (SPS), ATTN: AMSRD-ACC-N, Natick Contracting Division (R and BaseOPS), Building 1, Kansas Street, Natick, MA 01760-5011
- ZIP Code
- 01760-5011
- Solicitation Number
- W911QY-FY14-JSEW
- Response Due
- 10/31/2013
- Archive Date
- 11/26/2013
- Point of Contact
- Jean Greenwood, 508-233-6101
- E-Mail Address
-
ACC-APG - Natick (SPS)
(jean.t.greenwood.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A REQUEST FOR INFORMATION (RFI) ONLY for commercial or non-developmental wipe technologies which are capable of meeting the basic requirements described below. This is not a Request for Quotation (RFQ), Request for Proposal (RFP) or an Invitation for Bid (IFB). It is a market research tool being used to determine the availability and adequacy of potential sources for planning purposes only. Responses to this notice are not considered as offers and cannot be accepted by the Government to form a binding contract. The Government does not intend to award a contract on the basis of responses nor otherwise pay for the preparation of any information presented or the use of any such information. Vendors who were awardees under solicitations W911QY-12-R-0006 and W911QY-13-R-0022 for the Joint Service Equipment Wipe should not submit those products in response to this RFI. REQUESTED INFORMATION: The Product Manager for the Decontamination Family of Systems (DFoS) under the Joint Project Manager for Protection (JPM P) is conducting a market survey to identify potential commercial or non-developmental wipe technologies that will provide immediate/operational decontamination capabilities for sensitive and non-sensitive equipment in hostile and non-hostile environments that have been exposed to chemical agents/contamination. Specifically, the DFoS Product Manager is requesting information on technologies that possess the following characteristics: 1. Products with the ability to decrease the level of gross chemical agent contamination from 10 g/m2 to 1 g/m2 in support of thorough decontamination on sensitive and non-sensitive equipment. 2. Products that can be applied directly to equipment surfaces and capable of removing gross contamination within five minutes following application. 3. Products that are available in durable packaging that can be easily opened by a Warfighter wearing Mission-Oriented Protective Posture (MOPP) 4. 4. Products that are non-hazardous, non-flammable and inherently safe, minimizing hazards to both personnel and the environment, and that do not produce uncontrollable residual hazards during the decontamination process. 5. Products that do not cause material/equipment degradation when used to decontaminate sensitive and non-sensitive equipment. 6. Products that do not cause false positives/negatives for fielded tactical detectors. 7. Products that do not degrade military relevant Individual Protection Equipment (IPE) or the effectiveness or ability of fielded decontamination products. The focus of this RFI is on products and/or technologies at Technology Readiness Level (TRL) 5-6 (as listed by the Chemical Biological Defense Program (CBDP) Technology Transition Handbook; 20 July 2005), which requires testing with chemical agents. Specific information requested on each of the products or technologies includes: 1. Performance and Efficacy Test Data including but not limited to: (a) Chemical surety agent data (e.g. residual agent data and contact hazard) (b) Material/equipment compatibility data (c) Shelf life 2. Material Safety Data Sheet (MSDS) 3. Environment, Safety and Occupational Health 4. Coverage Area 5. Instructions for Use (i.e. vendor proposed Concept of Operation) 6. Restrictions on Storage/Transportation 7. Restrictions on operations in varying environmental conditions (MIL-STD-810G) 8. Manufacturing/Production Maturity (e.g. a self-assessment of Manufacturing Maturity Level (MRL) based on the MRL definitions found in the Department of Defense (DoD) MRL Deskbook V2.2 July 2012) POINT OF CONTACT (POC): Interested parties shall submit information in response to this RFI to: Joint Project Manager for Protection ATTN: Erica Howell 50 Tech Parkway, Suite 301 Stafford, VA 22556 Questions concerning this RFI may be addressed by contacting: Veronica St. Claire Science & Technology support for DFoS, JPM P (931) 302-2638 veronica.stclaire@us.army.mil Responses shall be received NLT COB 31 October 2013. Documents shall be electronic in Microsoft Word, Excel, Power Point, and/or Adobe Professional format and provided on compact disk (CD). No telephonic or e-mail responses to this RFI will be considered. Where the vendor deems appropriate, hard copies can also be submitted as backup and/or support information. ADDITIONAL INFORMATION: All information received in response to this RFI that is marked proprietary will be handled accordingly. Responses to the RFI will not be returned. Responses to this RFI are not offers for contract and will not be used by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. Vendors having products that they believe would be suitable for military decontamination operations as described herein shall submit all supporting documentation requested by this RFI to the POC noted above.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/75738c98035df9f9f9415cace2e149ac)
- Place of Performance
- Address: Joint Project Manager for Protection 50 Tech Parkway, Suite 301 Stafford VA
- Zip Code: 22556
- Zip Code: 22556
- Record
- SN03205238-W 20130929/130927234850-75738c98035df9f9f9415cace2e149ac (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |