MODIFICATION
43 -- Ingersoll Rand Air Compressor and Desiccant Dryer
- Notice Date
- 10/9/2013
- Notice Type
- Modification/Amendment
- NAICS
- 333912
— Air and Gas Compressor Manufacturing
- Contracting Office
- ACC-APG - Edgewood, ATTN: AMSSB-ACC-E, 5183 Blackhawk Road, Aberdeen Proving Ground, MD 21010-5424
- ZIP Code
- 21010-5424
- Solicitation Number
- W911SR-13-COMPRESSOR
- Response Due
- 10/10/2013
- Archive Date
- 12/8/2013
- Point of Contact
- Brian Mazen, 4104363955
- E-Mail Address
-
ACC-APG - Edgewood
(brian.e.mazen.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- The purpose of this amendment is to clarify setup at APG for CLIN 0001. Setup means, the Government wants a representative available for the initial operation of the units to ensure they are functioning properly. NOT physical installation. All other terms and conditions remain unchanged. The closing date shall remain 10 October 2013 at 2:00 P.M. Eastern Time. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This combined synopsis/solicitation W911SR-13-COMPRESSOR is issued as a request for proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-70. The Government intends to award a single award, Firm Fixed Price Contract for the Ingersoll Rand Rotary Screw Air Compressor P/N Sierra H50A & Ingersoll Rand Heatless Dessicant Dryer P/N HL2501HEOAA described below. The solicitation is limited to the Ingersoll Rand Rotary Screw Air Compressor & Ingersoll Rand Heatless Dessicant Dryer identified below under the authority of FAR 6.302-1. Any offeror proposing other than the brand name items identified below will not be considered for award. Offerors are required to provide a copy of their representation and certifications as required by FAR clause 52.212-3. The NAICS code for this solicitation is 333912 and the size standard is 500 employees. This solicitation is limited to those offerors proposing to supply the Ingersoll Rand items identified below, with appropriate modifications if necessary. DESCRIPTION OF ITEMS/STATEMENT OF WORK Contract Line Item Numbers (CLINs): CLIN 0001: Rotary Screw Air Compressor P/N Sierra H50A; Quantity: 5 each Oil less air supply roots/screw compressor Power 460 volts and 3 phase, max 85 amps, 50 HP Air supply Continuous. 180 CFM min at 125 PSI min. Air inlet is filtered to prevent dust intrusion Compressor enclosure shall be fitted with sound deadening materials not to exceed 85 DBA Compressor shall be capable of running in operating conditions with an ambient temperature range of 25-120 deg F. Compressor will be located outside and exposed to sun. Compressor shall have appropriate cover and protection from the elements. Compressor enclosure shall meet National Electrical Manufactures Association (NEMA) Type 4 standards. Compressor enclosure shall be equipped with forklift openings Standard commercial warranty Compressor Enclosure shall have a powder coated finish applied to protect it from the elements. Compressor shall be Air Cooled. Air discharge connection size shall be 1.5 quote mark NPT female Setup at APG, MD CLIN 0002: Heatless Desiccant Dryer P/N HL2501HEOAA; Quantity 4 each -Contractor shall deliver an Ingersoll Rand HL250 Heatless Desiccant Dryer that meets the following specifications: Dew Point -40 degrees F Minimum Capacity 180 cfm Minimum operating pressure 125 psi Dryer shall use heatless quote mark pressure-swing quote mark drying; refrigerated dryers are NOT acceptable. Energy management system Dryer shall be capable of running in operating conditions with an ambient temperature range of 25-120 deg F. Dryers will be located outside and exposed to sun Standard commercial warranty ASME code Vessel All steel components shall be coated to protect it from weather and rusting Setup at APG, MD Shipping/Packaging: Contractor shall utilize standard commercial packaging. FOB is Destination to: U.S. Army RDECOM RDCB-DEE 4301 Otto Rd. APG, MD 21010 ATTN: Jason Adamek Inspection/Acceptance: Inspection and Acceptance will be at Destination and is limited to kind, count, and condition. Delivery Schedule: See attachment 1, DeliverySchedule for exact schedule CLAUSES 52.203-3 Gratuities 52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (the following clauses within this clause apply: 52.203-6 w/ Alt I, 52.204-10, 52.209-6, 52.209-10, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.223-18, 52.225-13, 52.232 33) 52.232-39 Unenforceability of Unauthorized Obligations 52.247-34 FOB Destination 52.247-35 FOB Destination, within consignee's premises 52.247-48 FOB Destination-Evidence of Shipment 52.252-2 Clauses Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm (End of clause) 252.203-7000 Requirements relating to Compensation of Former DoD Officials 252.203-7002 Requirements to Inform Employees of Whistleblower Rights 252.204-7003 Control of Government Personnel Work Product 252.204-7004 Alt A System for Award Management 252.211-7003 Item Identification and Valuation 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7012 Preference for Certain Domestic Commodities 252.243-7001 Pricing of Contract Modifications 252.246-7000 Material Inspection and Receiving Report 252.232-7006 Wide Area WorkFlow Payment Instructions (clause fill-ins to be provided on award) 252.243-7002 Requests for Equitable Adjustment 252.247-7023 Transportation of Supplies by Sea 252.247-7024 Notification of Transportation of Supplies by Sea PROVISIONS 52.204-7 System for Award Management 52.212-1 Instructions to Offerors-Commercial Items 52.217-5 -- Evaluation of Options 52.252-1 -- Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.209-7001 Disclosure of Ownership or Control by the Government of a Terrorist Country 252.215-7007 Notice of Intent to Resolicit 252.215-7008 Only One Offer 252.225-7000 Buy American - Balance of Payments Program Certificate The Defense Priorities and Allocations System (DPAS) rating for this effort is DO-C9. All offerors are required to submit technical drawings or specification sheets for the air compressors and desiccant dryers they intend to supply to meet the solicitation requirements. All offerors whose technical drawings or specification sheets indicate performance or dimensions that differ from the requirements listed in this solicitation shall provide a statement concerning how the proposed parts will be modified to meet the solicitation requirements. The Government will evaluate each offerors submission for compliance with the solicitation requirements. Any offeror proposing other than the Ingersol Rand items identified above will not be considered unacceptable and will not be considered for award. Any offeror proposing Ingersol Rand items that do not meet the specifications identified in this solicitation will be considered unacceptable and will not be considered for award. All offerers are required to state whether they can or cannot meet the Government's delivery schedule (See attachment 1, deliveryschedule). Award will be made to the offeror whose proposal provides the items identified above that are capable of meeting all solicitation requirements and represents the lowest total evaluated price. The total evaluated price will be based on adding the total price for CLIN 0001 and 0002. The Government anticipates utilizing price analysis in determining the proposed prices fair and reasonable. The Government reserves the right to request other than cost and pricing data and conduct cost analysis should it be needed to determine the proposed price fair and reasonable. All proposals shall be sent via e-mail to Brian Mazen, brian.e.mazen.civ@mail.mil by 2:00 P.M. EST on 10 October 2013.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/3e52b8deb0d07d2e98ecaeb286545538)
- Place of Performance
- Address: ACC-APG - Edgewood ATTN: AMSSB-ACC-E, 5183 Blackhawk Road Aberdeen Proving Ground MD
- Zip Code: 21010-5424
- Zip Code: 21010-5424
- Record
- SN03213982-W 20131011/131009234038-3e52b8deb0d07d2e98ecaeb286545538 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |