Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 25, 2013 FBO #4353
SOLICITATION NOTICE

31 -- Bonneville 2nd Powerhouse Main Unit 11 Repair

Notice Date
10/23/2013
 
Notice Type
Presolicitation
 
NAICS
332710 — Machine Shops
 
Contracting Office
USACE District, Portland, Contracting Division (CECT-NWP), P.O. Box 2946, Portland, OR 97208-2946
 
ZIP Code
97208-2946
 
Solicitation Number
W9127N-14-R-0015
 
Response Due
11/19/2013
 
Archive Date
12/22/2013
 
Point of Contact
David Boone, (503) 808-4614
 
E-Mail Address
USACE District, Portland
(david.c.boone@usace.army.mil)
 
Small Business Set-Aside
N/A
 
Description
The Portland District Army Corps of Engineers intends to award a firm fixed price contract for repairs to Bonneville 2nd Powerhouse Main Unit 11 at Bonneville Lock and Dam in Multnomah County, Oregon. This project includes the following: A new thrust collar and a new one-piece thrust runner shall be furnished by the Contractor. The thrust runner and thrust collar shall be final machined together with a mandrel (dummy shaft) to mimic the existing shaft. The Contractor shall site measure the shaft to provide the appropriate interference fit for the mandrel. Note that final tolerances for the thrust collar and thrust runner are very tight. The new thrust runner shall conform to ASTM A 36/A 36M, vacuum degassed, hot rolled or forged, unless otherwise accepted. The new thrust collar thickness of plates is anticipated to increase in order to alleviate cracking discovered; material shall be ASTM A36. All welds will be full penetration, 100% NDT of phase array and traditional UT and MT. The thrust collar and the thrust runner shall be final machined together with a mandrel (dummy shaft) to mimic the existing shaft. The existing spring bed for Unit 11 shall be shipped out and re-machined flat, removing no more than 0.010 inches unless otherwise approved. Any material removal from the existing spring bed shall be added onto the thrust runner/collar assembly. A site visit will be held at the Bonneville Lock and Dam on Thursday, 7 November 2013 beginning at 9:30 AM. Offerors are urged to attend. Contractors planning to attend shall email Mr. Mike Adams at Michael.D.Adams@usace.army.mil and indicate company name, the names of each individual who will attend, and whether each attendee is a U.S. citizen. A photo ID may be required to gain access to the site. The solicitation will be available for download on or about 5 November 2013 with proposals due approximately 14 days after issue. This is an unrestricted procurement. The NAICS code for this requirement is 332710. Point of Contact for small business questions or assistance is the Portland District Deputy for Small Business, Carol McIntyre at 503-808-4602 or carol.a.mcintyre@usace.army.mil.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA57/W9127N-14-R-0015/listing.html)
 
Place of Performance
Address: USACE District, Portland Contracting Division (CECT-NWP), P.O. Box 2946 Portland OR
Zip Code: 97208-2946
 
Record
SN03220601-W 20131025/131023234048-e661219dccd3e51614fa93b5f551eec2 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.