Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 30, 2013 FBO #4358
SOURCES SOUGHT

W -- Specialized Equipment Leasing

Notice Date
10/28/2013
 
Notice Type
Sources Sought
 
NAICS
532412 — Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing
 
Contracting Office
Department of the Air Force, Air Force Materiel Command, OO-ALC/PKO, 6038 Aspen Ave. B1289NE, Hill AFB, Utah, 84056-5805, United States
 
ZIP Code
84056-5805
 
Solicitation Number
SPECIALIZEDEQUIPMENT20131028
 
Archive Date
11/19/2013
 
Point of Contact
Andrew S. Taylor, Phone: 8017752394, Lei Yang, Phone: 801-586-3347
 
E-Mail Address
Andrew.Taylor@hill.af.mil, lei.yang@hill.af.mil
(Andrew.Taylor@hill.af.mil, lei.yang@hill.af.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
Notice Type: Sources Sought Synopsis: This is only a sources sought. This is not a solicitation nor does it guarantee a solicitation will be issued. Requests for solicitations will not receive any response. Any information submitted to this sources sought is strictly voluntary. The government will neither award a contract solely on the basis of this notice, nor pay for any information that may be submitted by respondents to this Sources Sought. This Notice is a request by the Government to collect information from Specialized Equipment companies for the purpose of Market Research. Not providing a response to this Sources Sought will not prohibit/exclude your company from participating in any future solicitations. OL:H/PZIOA, Hill AFB, Operational Contracting is considering issuing a Request for Quote (RFQ) for the Leasing of Specialized Equipment. All requirements will be for Utah Test and Training Range (UTTR), Utah. Sources being sought are restricted to Region 8. Region 8 is defined as Colorado, Montana, North Dakota, South Dakota, Utah, and Wyoming. Sources being sought are also restricted to small business concerns under NAICS code 532412, size standard of $30.0M as of 28 Oct 2013. The Standard Industrial Code is 7353. The scope of work includes providing requested equipment to the Utah Test and Training Range (UTTR), Utah. All equipment functionality must work as designed, all safety items must be installed and operable, and unlimited mileage/hour usage and normal wear and tear should be expected. Typical work includes, but is not limited to: All required repair, service or replacement of vehicles as required. Following is a list of the Specialized Equipment sought after for leasing: • Wheel Loader: John Deere 744J or equivalent 5yd wheel loader with quick-change fork attachment and bucket. Loader shall reach 15'-11" in height and shall be able to lift loads of up to 40,000 pounds. • Track Dozer: John Deere 750J Dozer code#1030 or CAT D5K LGP or equivalent. The dozer shall have a low ground pressure footprint and a 6-way blade. Optional equipment: winch and/or rippers. The dozer shall have a nominal 84" gauge, 102"-wide track. • Articulating Boom: JLG-80 or equivalent 80' articulating boom with the welding package. The boom shall have a 250 amp welder package positioned under the control station. • Water Truck: 4,000 to 6,000 gallon water truck with rear water spreader bar and the ability to self-load from a water pond. The truck shall have a 3" suction hose 30' in length with a screen mounted at the inlet end. • High-Reach Bucket Truck: 65' Ariel boom height 4X4 or 4X2 drive. Open basket is preferred. • High-Reach Bucket Truck: 85' Ariel boom height 4X4 or 4X2 drive. Open basket is preferred. • 20 Yard Belly Dumps: Capacity to be twenty cubic yards or larger. Two or Three axles acceptable. Tires suitable for off road travel (gravel). Spare tire to be provided. • Water Tank Trailer: 4,000 to 8,000 gallon water tank with rear water spreader bar. The water tank shall have 3" attachments for filling. • 120 Ton Crane: All-terrain cranes with 60-120 Ton capacity. Boom length to 197 feet. • Bobcat Skid Steer: 46-55 hp, 4WD, 1751-2750 lb. Operate Capacity, Diesel fuel, Bobcat / S220H or Case / 440SSL equivalent. • Vibrate Roller Single Drum Vibratory (Riding, Self-propelled): Available range of 5-12 Ton capacity with drum width up to 84"; Smooth and padfoot models; Cabs equipped with ROPS and Heavy vibration dampers for safety and comfort; Hydrostatic drives for variable vibration and speed settings. • Sweeper: Self-propelled road and parking lot application. Water tank for dust control. 6-8 foot broom width. • Side Dumps: Capacity to be twenty cubic yards or larger. Two or Three axles acceptable. Tires suitable for off road travel (gravel). Spare tire to be provided. The purpose of this sources sought is to gain knowledge of interest, capabilities and qualifications of various members of industry, specifically the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), or Service-Disabled Veteran-Owned Small Business (SDVOSB). The Government must ensure there is adequate competition among the potential pool of responsible firms. The total contemplated contract capacity, minimum Task Order size, and maximum Task Order size for the resulting Leasing of Specialized Equipment contract(s) will be determined after the completion of Market Research which includes an analysis of the sources sought capabilities statements received. FIRMS RESPONDING TO THIS SOURCES SOUGHT MUST BE PERMITTED BY LAW TO PRACTICE THE PROFESSIONS OF LEASING SPECILIZED EQUIPMENT IN THE STATE OF UTAH. If your company is interested and you believe you are qualified, please provide the following: 1) a) Company name. b) Cage code. c) DUNS number. d) Active SAM registration. e) Size/number of employees. 2) A statement describing the company's interest in performing the work. 3) Organization chart of the team. 4) Capabilities, Experience with Government contracts, and a Brief background. 5) Previous Leasing of Specialized Equipment experience. 6) Contact information, Point of contact name, Phone number, E-mail address, FAX number, and web address(if available). Companies providing above referenced material are requested to limit their submission to no more than 10 pages. Responses must be received at Hill AFB, by e-mail (not through FedBizOpps) to SrA Lei Yang at lei.yang@hill.af.mil and to SrA Andrew Taylor at andrew.taylor@hill.af.mil. All responses must be received not later than 4 November 2013 at 2:00pm local time (Mountain Standard Time). Questions concerning this sources sought should be directed to SrA Lei Yang at (801)586-3347.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/75/SPECIALIZEDEQUIPMENT20131028/listing.html)
 
Place of Performance
Address: Utah Test and Training Range (UTTR), 1010 Avery Road Dugway Proving Ground, Oasis, Utah, 84029, United States
Zip Code: 84029
 
Record
SN03223020-W 20131030/131028233549-8569a03e77256369c71ea5a3be31cbd8 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.