AWARD
47 -- The Vicksburg District is looking to purchase a minimum of 35, but not more than 50, 50 ft sections of 12 inch diameter pump discharge hose for our PTO driven pumps.
- Notice Date
- 11/6/2013
- Notice Type
- Award Notice
- NAICS
- 326220
— Rubber and Plastics Hoses and Belting Manufacturing
- Contracting Office
- USACE District, Vicksburg, ATTN: CEMVK-CT, 4155 Clay Street, Vicksburg, MS 39183-3435
- ZIP Code
- 39183-3435
- Solicitation Number
- W912EE-14-T-0002
- Response Due
- 10/29/2013
- Archive Date
- 12/22/2013
- Point of Contact
- Jason M. Carlock, 601-631-5793
- E-Mail Address
-
USACE District, Vicksburg
(jason.m.carlock@usace.army.mil)
- Small Business Set-Aside
- N/A
- Award Number
- W912EE-14-P-0006
- Award Date
- 11/4/2013
- Awardee
- J.G.B. Enterprises, Inc. (085172005) <br> 115 Metropolitan Dr <br> Liverpool, NY 13088-5335
- Award Amount
- $68,080.00
- Line Number
- 0001
- Description
- I. DESCRIPTION/SPECIFICATIONS 1. SCOPE OF WORK: The Vicksburg District is looking to purchase a minimum of 35, but not more than 50, 50 ft sections of 12 inch diameter pump discharge hose for our PTO driven pumps. 1a. QUANTITY: Prior to award, the Government reserves the right to increase the final delivered quantity depending on the unit price and available funding. The Government expects to purchase a minimum of 35 but not more than 50 hoses. 2. QUALITY REQUIREMENTS: 2.a Each 50 ft section must be heavy duty 2 ply material with a rubber reinforced outer covering. 2.b Each 50 ft section shall have a total weight of not less than 120 lbs and no more than 190 lbs. 2.c Each section must have a male end and a flared female end with either slip ring couplings, ring quick couplers or ring and cuff ends attached to each end of the hose so that no additional couplings, fittings, or clamps are required to attach sections of hose together. 2.d Each section of hose must have a working pressure of not less than 40 psi and a burst pressure of not less than 120 psi II. INSPECTION AND ACCEPTANCE 1. GENERAL: The inspection and acceptance procedures specified herein set forth a general policy that only the supplies meeting the requirements of this purchase order will be accepted. 2. UNSATISFACTORY MATERIAL: Any material delivered that is found not to be in compliance with these specifications shall be promptly removed by the Supplier at his/her own expense. III. DELIVERY OR PERFORMANCE: 1.COORDINATION OF DELIVERIES: The Supplier shall contact Mr. Gordon Watkins, 24 hours prior to delivery, for the purpose of coordinating delivery activities. Delivery is to be made prior to January 31, 2014, Monday - Friday between the hours of 0700 -1400. 2. DELIVERY LOCATION: USACE Attn: Gordon Watkins, CEMVK-EM 2449 Haining Rd Vicksburg, MS 39183 601-631-7222 Evaluation Criteria. Requirement shall be awarded to the lowest price technically acceptable offeror. The offer shall be evaluated according to technical acceptability and price. Technical Acceptability - the ability to meet the minimum requirements as specified in this solicitation. To be determined technically acceptable, quoters must provide technical specifications for the discharge hoses they are quoting.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA38/W912EE-14-T-0002/listing.html)
- Record
- SN03229565-W 20131108/131106234217-9d763db36a92d271b33b30fcf974a96a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |