SOLICITATION NOTICE
29 -- FILTER ELEMENT, INTAKE
- Notice Date
- 11/18/2013
- Notice Type
- Presolicitation
- NAICS
- 336390
— Other Motor Vehicle Parts Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPM7L3-14-R-0017
- Archive Date
- 11/18/2014
- Point of Contact
- Sheila A. Robbins, Phone: 6146928000
- E-Mail Address
-
sheila.robbins@dla.mil
(sheila.robbins@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- NSN(s): 2940-01-406-9209 Item Description: Filter element, intake Manufacturer's Code and Part Number. Approved: 18265/P531597 THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. APPROVED SOURCES OF SUPPLY DONALDSON COMPANY, INC. 18265 P/N P531597 SPECIFICATIONS/STANDARDS/DRAWINGS: I/A/W DRAWING NR 19207 12287368 REFNO DTD AMEND NR A DTD 82 APR 28 TYPE NUMBER: I/A/W DRAWING NR 19207 12287369 REFNO DTD AMEND NR A DTD 82 APR 28 TYPE NUMBER: I/A/W DRAWING NR 19207 12388171 BASIC DTD AMEND NR D DTD 01 MAY 23 TYPE NUMBER: I/A/W DRAWING NR 19207 12388171 REFNO DTD AMEND NR DTD 12 MAR 27 TYPE NUMBER: PACKAGING DATA: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = 31: CLNG/DRY = 1: PRESV MAT = 00: WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X: UNIT CONT = E6: OPI = O: INTRMDTE CONT = DO: INTRMDTE CONT QTY = AAA: PACK CODE = U: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 00 - PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED 08183. For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): JCP Quantity (including option quantity): 544 Unit of Issue: EA Destination Information: FOB & Inspection & Acceptance Delivery Schedule: 109 days All responsible sources may submit an offer/quote which shall be considered. The solicitation will be available in FedBizOpps on its issue date of 12/3/2013 The Small Business size standard is 750 employees. Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date. This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are: cage 18265, part number P531597 While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. TYPE OF SET-ASIDE: UNRESTRICTED
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPM7L3-14-R-0017/listing.html)
- Place of Performance
- Address: DLA LAND & MARITIME (DSCC-FLBD), DEFENSE SUPPLY CENTER COLUMBUS, 3990 E. BROAD STREET, COLUMBUS, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN03236416-W 20131120/131118234305-075f58cd4a9b9b2f7946ec1295a854e1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |