FBODaily.com | FedBizOpps: PRESOL | 83 | Running Shoes & Cross-Trainer Shoes - ATTACHMENTS

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 22, 2013 FBO #4381
SOLICITATION NOTICE

83 -- Running Shoes & Cross-Trainer Shoes - ATTACHMENTS

Notice Date: 11/20/2013
Notice Type: Combined Synopsis/Solicitation
NAICS: 316210 — Footwear Manufacturing
Contracting Office: Department of the Air Force, Direct Reporting Units, USAF Academy - 10 CONS, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315, United States
ZIP Code: 80840-2315
Solicitation Number: FA7000-14-T-0005
Archive Date: 1/4/2014
Point of Contact: Carmen McClanathan, Phone: 7193330809, Diana Myles-South, Phone: 719-333-8650
E-Mail Address: carmen.mcclanathan@us.af.mil, Diana.South@us.af.mil
(carmen.mcclanathan@us.af.mil, Diana.South@us.af.mil)
Small Business Set-Aside: Total Small Business
Description: ATTACHMENT 7, Women's Cross-Trainers Sizes & Widths ATTACHMENT 6, Men's Cross-Trainers Sizes & Widths ATTACHMENT 5, Women's Running Sizes & Widths ATTACHMENT 4, Men's Running Sizes & Widths ATTACHMENT 3, Bar Code Sample ATTACHMENT 2, PD 251 6 FEB 04, Cross-Trainers ATTACHMENT 1, PD 252 6 OCT 09, Running Shoes This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a Request for Quotation, (RFQ), solicitation number FA7000-14-T-0005, in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-70 effective 30 Sep 13. The North American Industry Classification System Code (NAICS) is 316210 and the business size standard is 1,000 employees. This acquisition is unrestricted. All responsible sources may submit a quote, which if received timely, will be considered by the 10th Contracting Squadron, 10 LGCB, United States Air Force Academy (USAFA). Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this combined synopsis/solicitation could result in the quote being ineligible for award. It is the Offeror's responsibility to ensure their quote meets all the requirements identified herein. Buy American Act and certification of compliance is required and must be submitted with quote (see DFARS clause 252.225-7001). The USAF Academy has a requirement to procure men's and women's running shoes and cross-trainer shoes. Each shoe must meet or exceed the salient characteristics below. Provide pricing for each of the following line items Line Item 0001 Description Qty. 996 Pair Unit Price Extended Price Men's Running Shoes IAW PD 252, dated 6 OCT 09 (See ATTACHMENT 1). First Article Before production is commenced, the contractor shall submit to the contracting officer for approval the following items: One pair size 10 men's running shoe conforming to the salient characteristics of this purchase description. SALIENT CHARACTERISTICS: 1. Uppers a. Upper: Shall be made of lightweight mesh and synthetic material for breathability. The running shoe shall be low cut. The lacing configuration shall provide comfort and fit. The running shoe shall be mostly white and light gray. Colors for minor details such as logos or striping shall only be in accented colors of blue, black, and/or silver. Reflective accents are desirable. 2. Sole a. Insole: Shall have a sturdy full-length insole for heel impact absorption and arch support. It shall be made of high-density foam with a good compressible sponge rubber material commonly used in the shoe industry. b. Outsole: Shall be made of carbon (nonmarking material) or high grain rubber heel for durability. The outsole shall have crossed-girder type of configuration or comparable outersole with traction, suitable for responsive running. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). c. Midsole: Shall incorporate a visible air or gel cushioning or air or gel sole system that accommodates orthotics and shall integrate and control transition to forefoot. Sizes and Widths: See ATTACHMENT 4. Workmanship: The finished running shoe shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractor's own quality assurance standards and the quality assurance standards defined by the technical data in the bid package. Quality Assurance: Certification: The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer's own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Certification of Compliance: Unless otherwise specified in the contract or purchase order, certificates of compliance may be submitted on all components. INSPECTION: The contractor shall inspect the finished products 100% for compliance with this purchase description prior to submitting them to USAFA for final inspection by 34LS/LGU Cadet Uniform Flight personnel in accordance with ANSI Z1.4 and this purchase description. The point of final inspection and acceptance of the finished articles shall be at USAFA. REQUEST BAR CODE LABEL WITH REQUIRED FIRST ARTICLE. Bar Code Label Requirement: A bar code label containing a 10ABW/LGLC approved stock number in Code 39, brief description, and size must be placed on each individually packaged pair of shoes, to each box and shipping container. See ATTACHMENT 3 for a bar code example. Send Bid Sample, First Article & Bar Code Label: ATTENTION: Carmen McClanathan/LGCB 8110 Industrial Drive USAF Academy CO 80840-2315 Quantity Unit Price/Extended Price: $____________ Line Item 0002 Description Qty. 286 Pair Unit Price Extended Price Women's Running Shoes IAW PD 252, dated 6 OCT 09 (See ATTACHMENT 1). First Article Before production is commenced, the contractor shall submit to the contracting officer for approval the following items: One pair size 8 women's running shoe conforming to the salient characteristics of this purchase description. SALIENT CHARACTERISTICS: 1. Uppers a. Upper: Shall be made of lightweight mesh and synthetic material for breathability. The running shoe shall be low cut. The lacing configuration shall provide comfort and fit. The running shoe shall be mostly white and light gray. Colors for minor details such as logos or striping shall only be in accented colors of blue, black, and/or silver. Reflective accents are desirable. 2. Sole b. Insole: Shall have a sturdy full-length insole for heel impact absorption and arch support. It shall be made of high-density foam with a good compressible sponge rubber material commonly used in the shoe industry. c. Outsole: Shall be made of carbon (nonmarking material) or high grain rubber heel for durability. The outsole shall have crossed-girder type of configuration or comparable outersole with traction, suitable for responsive running. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). d. Midsole: Shall incorporate a visible air or gel cushioning or air or gel sole system that accommodates orthotics and shall integrate and control transition to forefoot. Sizes and Widths: See ATTACHMENT 5. Workmanship: The finished running shoe shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractor's own quality assurance standards and the quality assurance standards defined by the technical data in the bid package. Quality Assurance: Certification: The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer's own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Certification of Compliance: Unless otherwise specified in the contract or purchase order, certificates of compliance may be submitted on all components. INSPECTION: The contractor shall inspect the finished products 100% for compliance with this purchase description prior to submitting them to USAFA for final inspection by 34LS/LGU Cadet Uniform Flight personnel in accordance with ANSI Z1.4 and this purchase description. The point of final inspection and acceptance of the finished articles shall be at USAFA. REQUEST BAR CODE LABEL WITH REQUIRED FIRST ARTICLE. Bar Code Label Requirement: A bar code label containing a 10ABW/LGLC approved stock number in Code 39, brief description, and size must be placed on each individually packaged pair of shoes, to each box and shipping container. See ATTACHMENT 3 for a bar code example. Send Bid Sample, First Article & Bar Code Label: ATTENTION: Carmen McClanathan/LGCB 8110 Industrial Drive USAF Academy CO 80840-2315 Quantity Unit Price/Extended Price: $____________ Line Item 0003 Description Qty. 860 Pair Unit Price Extended Price Men's Cross-Trainers IAW PD 251, dated 6 FEB 04 (See ATTACHMENT 2). First Article Before production is commenced, the contractor shall submit to the contracting officer for approval the following items: One pair size 10 men's Cross-Trainer conforming to the salient characteristics of this purchase description. SALIENT CHARACTERISTICS: Design: The cross training shoe shall be a mid to high quality that incorporates state of the art technology providing comfort, durability and support. Material / Construction 1. Uppers a. Uppers shall be made of lightweight synthetic material for medial and lateral support, and to provide comfort. The cross training shall be low cut. The lacing configuration shall provide comfort and fit. The color of the cross trainer shall be in white and may incorporate small tones of black, silver, and blues. 2. Sole a. Insole: The insole shall have a sturdy full-length insole. The insole shall be a well cushion made of a good compressible sponge rubber used in the shoe industry, for arch and heel support. b. Footbed shall be fully length made of a sturdy insole board or similar to what is used in the shoe industry, for good foot stability. c. Outsole: The outsole shall be made of nonmarking material. It shall be made of solid rubber with a unique traction pattern for a variety of surfaces. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). For ASTM documents write to: ASTM 100 Barr Harbor Dr, West Conshohocken, PA 19428-2959 or call: (610) 832-9585, or email: Or Email: Contact ASTM d. Midsole and Heel: The midsole and heel shall incorporate a visible air cushioning or air sole system in heel area, providing cushioning and protection from impact. Sizes and Widths: See ATTACHMENT 6. Quality Assurance 1. Certification: The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer's own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. 3. Certification of Compliance: Unless otherwise specified in the contract or purchase order, certificates of compliance shall be requested by government on all components, if the government deems necessary. The point of final inspection and acceptance of the finished articles shall be at USAFA. REQUEST BAR CODE LABEL WITH REQUIRED FIRST ARTICLE. Bar Code Label Requirement: A bar code label containing a 10ABW/LGLC approved stock number in Code 39, brief description, and size must be placed on each individually packaged pair of shoes, to each box and shipping container. See Attachment 3 for a bar code example. Send Bid Sample, First Article & Bar Code Label: ATTENTION: Carmen McClanathan/LGCB 8110 Industrial Drive USAF Academy CO 80840-2315 Quantity Unit Price/Extended Price: $_____________ Line Item 0004 Description Qty. 267 Pair Unit Price Extended Price Women's Cross-Trainers IAW PD 251, dated 6 FEB 04 (See ATTACHMENT 2). First Article Before production is commenced, the contractor shall submit to the contracting officer for approval the following items: One pair size 8 women's Cross-Trainers conforming to the salient characteristics of this purchase description. SALIENT CHARACTERISTICS: Design: The cross training shoe shall be a mid to high quality that incorporates state of the art technology providing comfort, durability and support. Material / Construction 1. Uppers b. Uppers shall be made of lightweight synthetic material for medial and lateral support, and to provide comfort. The cross training shall be low cut. The lacing configuration shall provide comfort and fit. The color of the cross trainer shall be in white and may incorporate small tones of black, silver, and blues. 2. Sole c. Insole: The insole shall have a sturdy full-length insole. The insole shall be a well cushion made of a good compressible sponge rubber used in the shoe industry, for arch and heel support. d. Footbed shall be fully length made of a sturdy insole board or similar to what is used in the shoe industry, for good foot stability. c. Outsole: The outsole shall be made of nonmarking material. It shall be made of solid rubber with a unique traction pattern for a variety of surfaces. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). For ASTM documents write to: ASTM 100 Barr Harbor Dr, West Conshohocken, PA 19428-2959 or call: (610) 832-9585, or email: Or Email: Contact ASTM e. Midsole and Heel: The midsole and heel shall incorporate a visible air cushioning or air sole system in heel area, providing cushioning and protection from impact. Sizes and Widths: See ATTACHMENT 7. Quality Assurance 1. Certification: The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer's own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. 4. Certification of Compliance: Unless otherwise specified in the contract or purchase order, certificates of compliance shall be requested by government on all components, if the government deems necessary. The point of final inspection and acceptance of the finished articles shall be at USAFA. REQUEST BAR CODE LABEL WITH REQUIRED FIRST ARTICLE. Bar Code Label Requirement: A bar code label containing a 10ABW/LGLC approved stock number in Code 39, brief description, and size must be placed on each individually packaged pair of shoes, to each box and shipping container. See ATTACHMENT 3 for a bar code example. Send Bid Sample, First Article & Bar Code Label: ATTENTION: Carmen McClanathan/LGCB 8110 Industrial Drive USAF Academy CO 80840-2315 Quantity Unit Price/Extended Price: $_____________ TOTAL PRICE: $ ______________ DELIVERY IS NO LATER THAN 10 APRIL 2014 The following Federal Acquisition (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items (Jul 2013), addenda applies: The contractor shall submit their quote on company letterhead to include the following: - solicitation number - contact name - address - telephone number of the offeror - unit price/extended price - any discount terms - delivery terms - cage code - DUNS number - tax identification number - size of business and acknowledgement of solicitation - proof that product meets salient characteristics - warranty information - amendments if required. Quotes & Bid Samples must be received no later than 3:00 pm Mountain Standard Time (MST), 20 December 2013 at the 10 CONS/LGCB, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Please submit quotes by e-mail to Diana South at Diana.South@us.af.mil, 719-333-08650 AND Carmen McClanathan at Carmen.McClanathan@us.af.mil, 719-333-0809. Addenda to FAR 52.212-1, PROPOSAL PREPARATION INSTRUCTIONS: 1. PART I - PRICE PROPOSAL - Submit on company letter the unit price for each line item to include extended price with an overall total price. The extended amount must equal the whole dollar unit price multiplied by the number of units. a. The provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items and its Alternate I must be completed. Offerors are highly encouraged to complete all representations and certifications electronically online at: (www.sam.gov) or the certifications within this solicitation and shall be completed in hard copy and submitted with quote. b. The provision at DFARS 252.209-7994, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Federal Law - Fiscal Year 2014 Appropriations, Deviation 2014-O0004, must be completed and returned with quote which is written within this solicitation. c. The provision at DFARS 252.209-7998, Representation regarding Conviction of a Felony Criminal Violation under any Federal or State Law, must be completed and returned with quote which is within this solicitation. d. The provision at DFARS 252.225-7000, Buy American Act-Balance of Payments Program Certificate, must be completed, signed and returned with quote which is within this solicitation. e. The provision at DFARS 252.247-7022, Representation of Extent of Transportation by Sea, must be completed and returned with the quote which is within this solicitation. f. The System for Award Management (SAM), contractors must be registered with SAM to conduct business with the Department of Defense. No purchase order can be awarded to any company without this registration (www.sam.gov). g. Provide a written statement that the offeror's proposal incorporates all amendments to the solicitation (if applicable). h. Prices quotes must be Firm-Fixed Price to include shipping and handling charges based on F.O.B. Destination. Quotes received with FOB: Other than Destination will not be considered. Delivery is required no later than the date shown for each line item above. ADDRESS: 10 MSG LGRMC - FX7000 MITCHELL HALL ANNEX, BLDG 2351 USAF ACADEMY CO 80840 2. Part II - : Technical: Offeror must submit a bid sample with literature or pictures with literature that adequately demonstrate that their product meets the salient characteristics of the solicitation. A general statement of compliance or restatement of the salient characteristics is insufficient. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer, bid sample or pictures and literature. If an offeror cannot comply with every requirement that offer will not be considered. The provision at FAR 52.212-2, Evaluation--Commercial Items apply to this acquisition: 52.212-2 Evaluation-Commercial Items (Jan 1999) a. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government price and other factors considered. The following factor shall be used to evaluate offers: i. Technical ii. Price When applicable, the price evaluation adjustment for HUB Zone small business concerns will be applied in accordance with FAR 52.219-4, Notice of Price Evaluation Preferences for HUB Zone Small Business Concerns, to arrive at an evaluated price. Paragraphs b and c are not applicable as shown below: b. Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). c. A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) ADDENDUM TO 52.212-2 -- Evaluation -- Commercial Items (Jan 1999). BASIS FOR CONTRACT AWARD: This is a competitive best value source selection in accordance with FAR Parts 12 and 13. The evaluation process shall proceed as follows: 1. Initially, quotes will be evaluated on a pass or fail basis to determine whether the proposed Running Shoes & Cross-Trainers meet salient physical, functional, or performance characteristics of the specifications shown below: Line Item 0001, Men's Running Shoes IAW PD 252, dated 6 OCT 09 (See ATTACHMENT 1). SALIENT CHARACTERISTICS: 5. Uppers a. Upper: Shall be made of lightweight mesh and synthetic material for breathability. The running shoe shall be low cut. The lacing configuration shall provide comfort and fit. The running shoe shall be mostly white and light gray. Colors for minor details such as logos or striping shall only be in accented colors of blue, black, and/or silver. Reflective accents are desirable. 6. Sole d. Insole: Shall have a sturdy full-length insole for heel impact absorption and arch support. It shall be made of high-density foam with a good compressible sponge rubber material commonly used in the shoe industry. e. Outsole: Shall be made of carbon (nonmarking material) or high grain rubber heel for durability. The outsole shall have crossed-girder type of configuration or comparable outer sole with traction, suitable for responsive running. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). f. Midsole: Shall incorporate a visible air or gel cushioning or air or gel sole system that accommodates orthotics and shall integrate and control transition to forefoot. Line Item 0002: Women's Running Shoes IAW PD 252, dated 6 OCT 09 (See ATTACHMENT 1). SALIENT CHARACTERISTICS: 1. Uppers a. Upper: Shall be made of lightweight mesh and synthetic material for breathability. The running shoe shall be low cut. The lacing configuration shall provide comfort and fit. The running shoe shall be mostly white and light gray. Colors for minor details such as logos or striping shall only be in accented colors of blue, black, and/or silver. Reflective accents are desirable. 3. Sole e. Insole: Shall have a sturdy full-length insole for heel impact absorption and arch support. It shall be made of high-density foam with a good compressible sponge rubber material commonly used in the shoe industry. f. Outsole: Shall be made of carbon (nonmarking material) or high grain rubber heel for durability. The outsole shall have crossed-girder type of configuration or comparable outer sole with traction, suitable for responsive running. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). g. Midsole: Shall incorporate a visible air or gel cushioning or air or gel sole system that accommodates orthotics and shall integrate and control transition to forefoot. Line Item 0003: Men's Cross-Trainers IAW PD 251, dated 6 FEB 04 (See ATTACHMENT 2). SALIENT CHARACTERISTICS: Design: The cross training shoe shall be a mid to high quality that incorporates state of the art technology providing comfort, durability and support. Material / Construction 1. Uppers a. Uppers shall be made of lightweight synthetic material for medial and lateral support, and to provide comfort. The cross training shall be low cut. The lacing configuration shall provide comfort and fit. The color of the cross trainer shall be in white and may incorporate small tones of black, silver, and blues. 2. Sole e. Insole: The insole shall have a sturdy full-length insole. The insole shall be a well cushion made of a good compressible sponge rubber used in the shoe industry, for arch and heel support. f. Footbed shall be fully length made of a sturdy insole board or similar to what is used in the shoe industry, for good foot stability. c. Outsole: The outsole shall be made of nonmarking material. It shall be made of solid rubber with a unique traction pattern for a variety of surfaces. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). For ASTM documents write to: ASTM 100 Barr Harbor Dr, West Conshohocken, PA 19428-2959 or call: (610) 832-9585, or email: Or Email: Contact ASTM f. Midsole and Heel: The midsole and heel shall incorporate a visible air cushioning or air sole system in heel area, providing cushioning and protection from impact. Line Item 0004: Women's Cross-Trainers IAW PD 251, dated 6 FEB 04 (See ATTACHMENT 2). SALIENT CHARACTERISTICS: Design: The cross training shoe shall be a mid to high quality that incorporates state of the art technology providing comfort, durability and support. Material / Construction 1. Uppers b. Uppers shall be made of lightweight synthetic material for medial and lateral support, and to provide comfort. The cross training shall be low cut. The lacing configuration shall provide comfort and fit. The color of the cross trainer shall be in white and may incorporate small tones of black, silver, and blues. 2. Sole g. Insole: The insole shall have a sturdy full-length insole. The insole shall be a well cushion made of a good compressible sponge rubber used in the shoe industry, for arch and heel support. h. Footbed shall be fully length made of a sturdy insole board or similar to what is used in the shoe industry, for good foot stability. c. Outsole: The outsole shall be made of nonmarking material. It shall be made of solid rubber with a unique traction pattern for a variety of surfaces. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630). The outer sole hardness shall be within the range of a minimum of 45 and a maximum of 65 (ASTM D 2240). For ASTM documents write to: ASTM 100 Barr Harbor Dr, West Conshohocken, PA 19428-2959 or call: (610) 832-9585, or email: Or Email: Contact ASTM g. Midsole and Heel: The midsole and heel shall incorporate a visible air cushioning or air sole system in heel area, providing cushioning and protection from impact. (End of Addendum) 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS (JULY 2013) ADDENDUM TO FAR 52.212-4(c) CHANGES Text in paragraph (c) is deleted and replaced with the following: Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer (for a complete list of changes that may be made unilaterally, see FAR 43.103(b)) (End of Addendum) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (SEP 2013) (DEVIATION) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b)(1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) Additional FAR clauses cited in the clause applicable to this acquisition are: 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2013) 52.209-6 Protecting the Governments Interests When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (AUG 2013) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (MAY 2012) 52.219-8 Utilization of Small Business concerns 52.219-28 Post-Award Small Business Program Representation (JUL 2013) 52.222-3 Convict Labor (JUN 2003) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (MAR 2012) 52.222-21 Prohibition of Segregated Facilities (FEB 1999) 52.222-26 Equal Opportunity (MAR 2007) 52.222-35 Equal Opportunity for Veterans (SEP 2010) 52.222-36 Affirmative Action for Workers with Disabilities (OCT 2010) 52.222-37 Employment Report on Veterans (Sep 2010) 52.222-50 Combat Trafficking in Persons (FEB 2009) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration (JUL 2013) 52.233-3 Protest After Award (AUG 1996) 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) FAR clauses in full text: 52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil. (End of Clause) DFARS clauses cited in the clause applicable to this acquisition are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.225-7001 Buy American Act and Balance of Payments Program (DEC 2012) 252.225-7002 Qualifying Country Sources as Subcontractors (DEC 2012) 252.232-7003 Electronic Submission of Payments Request (DEC 2012) 252.232-7010 Levies on Contract Payments (DEC 2006) 252.244-7000 Subcontracts for Commercial Items (JUN 2013) 252.247-7023 Transportation of Supplies by Sea, ALT III (JUN 2013) 242.247-7024 Notification of Transportation of Supplies by Sea ( MAR 2000) (End of Clause) DFARS clauses in full text: 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). 2-In-1 (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Destination (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* -------------------------------------------------------------------------------------------- Field Name in WAWF Data to be entered in WAWF -------------------------------------------------------------------------------------------- Pay Official DoDAAC F67100 Issue By DoDAAC FA7000 Admin DoDAAC FA7000 Inspect By DoDAAC FX7000 Ship To Code FX7000 -------------------------------------------------------------------------------------------- (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. Carmen.McClanathan@us.af.mil (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. Carmen.McClanathan@us.af.mil Diana.south@us.af.mil (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) AFFARS CLAUSE IN FULL TEXT: 5352.201-9101 Ombudsman (NOV 2012): (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 <http://www.whitehouse.gov/omb/circulars/a076/a76_rev2003.pdf> competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the Center/MAJCOM/DRU or AFISRA ombudsmen, Kelly S. Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-2379 Email: Kelly.Snyder@us.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU or AFISRA level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) PROVISIONS: 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (AUG 2013) ALTERNATE I (APR 2011) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (b) through (i) of this provision. (a) Definitions. As used in this provision: "Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Inverted domestic corporation, as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology-- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). Service-disabled veteran-owned small business concern-- (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. Subsidiary means an entity in which more than 50 percent of the entity is owned-- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. Veteran-owned small business concern means a small business concern-- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned small business concern" means a small business concern-- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or (2) Whose management and daily business operations are controlled by one or more women. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------. (Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern. (2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern. Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-- (i) It * is, * is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ballot] is, [ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ----------.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-- (i) It [ballot] is, [ballot] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ballot] is, [ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ----------.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _____________________________________________ (10) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. (Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.) (i) (Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).) The offeror represents as part of its offer that it ( ) is, ( ) is not an emerging small business. (ii) (Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).) Offeror represents as follows: (A) Offeror's number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or (B) Offeror's average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts). (Check one of the following): Average Annual Number of Employees Gross Revenues ___ 50 or fewer ___ $1 million or less ___ 51 - 100 ___ $1,000,001 - $2 million ___ 101 - 250 ___ $2,000,001 - $3.5 million ___ 251 - 500 ___ $3,500,001 - $5 million ___ 501 - 750 ___ $5,000,001 - $10 million ___ 751 - 1,000 ___ $10,000,001 - $17 million ___ Over 1,000 ___ Over $17 million (11) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.) (i) General. The offeror represents that either-- (A) It ( ) is, ( ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the SAM Dynamic Small Business Search Database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It ( ) has, ( )( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.) (12) Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(10) of this provision.) (The offeror shall check the category in which its ownership falls): ____Black American. ____Hispanic American. ____Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ____Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory of the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ____Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ____Individual/concern, other than one of the preceding. (d) Certifications and representations required to implement provisions of Executive Order 11246-- (1) Previous Contracts and Compliance. The offeror represents that-- (i) It ( ) has, ( ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and (ii) It ( ) has, ( ) has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that-- (i) It ( ) has developed and has on file, ( ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or (ii) It ( ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act--Balance of Payments Program Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act--Balance of Payments Program--Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act--Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN (List as necessary) (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." (ii) ) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (4) Buy American Act--Free Trade Agreements--Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) ( ) Are, ( ) are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; and (2) ( ) Have, ( ) have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: Commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) ( ) Are, ( ) are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [ballot] Have, [ballot] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). (The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).) (1) Listed End Product Listed End Product • Listed Countries of Origin: • • • • • • (2) Certification. (If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.) ( )(i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. ( ) (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) ( )In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) (The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.) ( ) (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ( ) does ( ) does not certify that-- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. ( ) (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror ( ) does ( ) does not certify that-- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies-- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). ( ) TIN: --------------------. ( ) TIN has been applied for. ( ) TIN is not required because: ( ) Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; ( ) Offeror is an agency or instrumentality of a foreign government; ( ) Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. ( ) Sole proprietorship; ( ) Partnership; ( ) Corporate entity (not tax-exempt); ( ) Corporate entity (tax-exempt); ( ) Government entity (Federal, State, or local); ( ) Foreign government; ( ) International organization per 26 CFR 1.6049-4; ( ) Other ----------. (5) Common parent. ( ) Offeror is not owned or controlled by a common parent; ( ) Name and TIN of common parent: Name --------------------. TIN --------------------. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that-- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (End of provision) 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (a) Definition. "Covered DoD official" is defined in the clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials. (b) By submission of this offer, the offeror represents, to the best of its knowledge and belief, that all covered DoD officials employed by or otherwise receiving compensation from the offeror, and who are expected to undertake activities on behalf of the offeror for any resulting contract, are presently in compliance with all post-employment restrictions covered by 18 U.S.C. 207, 41 U.S.C. 2101-2107, and 5 CFR parts 2637 and 2641, including Federal Acquisition Regulation 3.104-2. (End of provision) DFARS 252.209-7994 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW - FISCAL YEAR 2014 APPROPRIATIONS (DEVIATION 2014-O0004) (OCTOBER 2013) (a) In accordance with section 101(a) of Division A of the Continuing Appropriations Act, 2014 (Pub. L. 113-46), none of the funds made available by that Act for DoD (including Military Construction funds) may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) 252.209-7998 REPRESENTATION REGARDING CONVICTION OF A FELONY CRIMINAL VIOLATION UNDER ANY FEDERAL OR STATE LAW (DEVIATION 2012-O0007) (MAR 2012) (a) In accordance with section 514 of Division H of the Consolidated Appropriations Act, 2012, none of the funds made available by that Act may be used to enter into a contract with any corporation that was convicted of a felony criminal violation under any Federal or State law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) The Offeror represents that it is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal or State law within the preceding 24 months. (End of provision) 252.225-7000 BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE (JUN 2012) (a) Definitions. "Commercially available off-the-shelf (COTS) item," "component," "domestic end product," "foreign end product," "qualifying country," "qualifying country end product," and "United States" have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government-- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that-- (i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: ----------------------------------------------------------------------- (Line Item Number Country of Origin) ----------------------------------------------------------------------- (Country of Origin) (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) 252.225-7031 SECONDARY ARAB BOYCOTT OF ISRAEL (JUN 2005) (a) Definitions. As used in this provision- (1) "Foreign person" means any person (including any individual, partnership, corporation, or other form of association) other than a United States person. (2) "United States" means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331. (3) "United States person" is defined in 50 U.S.C. App. 2415(2) and means- (i) Any United States resident or national (other than an individual resident outside the United States who is employed by other than a United States person); (ii) Any domestic concern (including any permanent domestic establishment of any foreign concern); and (iii) Any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern that is controlled in fact by such domestic concern. (b) Certification. If the offeror is a foreign person, the offeror certifies, by submission of an offer, that it- (1) Does not comply with the Secondary Arab Boycott of Israel; and (2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. 2407(a) prohibits a United States person from taking. (End of provision) 252.247-7022 REPRESENTATION OF EXTENT OF TRANSPORTATION BY SEA (AUG 1992) (a) The Offeror shall indicate by checking the appropriate blank in paragraph (b) of this provision whether transportation of supplies by sea is anticipated under the resultant contract. The term "supplies" is defined in the Transportation of Supplies by Sea clause of this solicitation. (b) Representation. The Offeror represents that it- _____ Does anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. _____ Does not anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. (c) Any contract resulting from this solicitation will include the Transportation of Supplies by Sea clause. If the Offeror represents that it will not use ocean transportation, the resulting contract will also include the Defense FAR Supplement clause at 252.247-7024, Notification of Transportation of Supplies by Sea. (End of provision)
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/DRU/10ABWLGC/FA7000-14-T-0005/listing.html)
Place of Performance: Address: United States Air Force Academy, Colorado Springs, Colorado, 80840, United States; Zip Code: 80840
Record: SN03237642-W 20131122/131120234252-b9fd42726ff04054314772a332b73316 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

83 -- Running Shoes & Cross-Trainer Shoes - ATTACHMENTS