FBODaily.com | FedBizOpps: PRESOL | 53 | Socket and hex head cap screws, and machine screws.

FBO DAILY - FEDBIZOPPS ISSUE OF DECEMBER 19, 2013 FBO #4408
SOLICITATION NOTICE

53 -- Socket and hex head cap screws, and machine screws.

Notice Date: 12/17/2013
Notice Type: Combined Synopsis/Solicitation
NAICS: 332722 — Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Contracting Office: SPMYM3 DLA Maritime KM, Portsmouth Naval Shipyard Portsmouth Naval Shipyard Portsmouth, NH
ZIP Code: 00000
Solicitation Number: SPMYM314M7026
Response Due: 1/10/2014
Archive Date: 1/10/2015
Point of Contact: Donna Getz 207-438-2386
Small Business Set-Aside: Total Small Business
Description: SPMYM3-14-Q-7026 Fasteners 3343408 Plus This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/ ). The RFQ number is SPMYM3-14-Q-7026. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-71 and DFARS Change Notice 20131216. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/html/current/252201.htm. The NAICS code is 332722, and the Small Business Standard is 500. This is a 100% Small Business Set Aside and as such the Nonmanufacturer ™s rule applies. This is an all or none award. A reverse auction may be held. 0001:SOCKET HEAD CAPSCREW 96 EA ______ ______ 1 / 2 “ 13 UNC “ 3A X 1 “ 1 / 2 ś LONG SL. FF-S-86E AMEND “ 4 TYPE VI, ALLOY STEEL, SELF LOCKING IAW MIL-DTL-18240F AMEND “ 1, ANY TYPE, NO COATING OR PLATING REQUIRED. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33434081 0002:SOCKET HEAD CAPSCREW 8 EA ______ ______ 1 / 2 “ 13 UNC “ 3A X 1 “ 1 / 2 ś LONG. FF-S-86E AMEND “ 4 TYPE VI, HEAD TO BE CROSS DRILLED. NICKEL COPPER ALLOY QQ-N-281D AMEND - 2. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33434082 0003:SOCKET HEAD CAPSCREW 6 EA ______ ______ 1 / 2 “ 13 UNC “ 2A X 1 “ 3 / 4 ś LONG. SL. FF-S-86E AMEND “ 4 TYPE VI, CRES IAW ASTM A564 / 564M/13, UNS S17400 (TYPE 630) AGE HARDENED TO CONDITION H1075. SELF LOCKING IAW MIL-DTL-18240F AMEND “ 1 TYPE śN ť QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33434082 0004:HEX HEAD CAPSCREW 12 EA ______ ______ 3 / 4 “ 10 UNC “ 2A X 4 ś LONG. SL. MIL-DTL-1222J TYPE “I, CRES IAW ASTM A564 / 564M/13, UNS S17400 (TYPE 630) AGE HARDENED TO CONDITION H1075. SELF LOCKING IAW MIL-DTL-18240F AMEND “ 1 TYPE śN ť QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33444061 0005:HEX HEAD CAPSCREW 3 EA ______ ______ 5 / 8 “ 11 UNC “ 2A X 6 “ 1 / 2 ś LONG MIL-DTL-1222J TY “I STEEL, GRADE “ 5. ZINC PLATED IAW (COMMERCIAL). QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33444081 0006:HEX HEAD CAPSCREW 1 EA ______ ______ 1 / 2 “ 13 UNC “ 2A X 1 “ 3 / 4 ś LONG MIL-DTL-1222J TY “I MATERIAL IS STAINLESS STEEL IAW SAE/AMS-QQ-S-763C GRADE 304 COND - A QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33444082 0007:HEX HEAD CAPSCREW 50 EA ______ ______ 1 / 2 “ 13 UNC “ 2A X 3 “ 1 / 4 ś LONG, MIL-DTL-1222J TY “I STEEL, GRADE “ 8. CADMIUM PLATED. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 3344411 0008:MACHINE SCREW 50 EA ______ ______ 1 / 2 “ 13 UNC “ 2A X 1 ś LONG, FF-S-92B AMEND “ 1, TY “ 1 (SLOTTED), STYLE “ 2S (82 DEGREE FLAT HEAD), MATERIAL TO BE STAINLESS STEEL, (SLOTTED), STYLE “ 2S (82 DEGREE FLAT HEAD) MATERIAL TO BE STAINLESS STEEL, SAE/AMS-QQ-S-763C, CL 304, COND - A QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454011 0009: HEX HEAD CAPSCREW 30 EA _______ ______ 1 / 2 “ 13 UNC “ 2A X 1 “ 3 / 8 ś LG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. MS-18116H AMEND “ 1. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454021 0010: HEX HEAD CAPSCREW 50 EA _______ ______ 1 / 2 “ 13 UNC “ 2A X 2 ś LG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. MS-18116H AMEND “ 1. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454022 0011: MACHINE SCREW15 EA ______ ______ 1 / 2 “ 13 UNC “ 2A X 2 ť LONG. FF-S-92B AMEND “ 1, TY “ 1 (SLOTTED) STYLE 2S (FLAT HEAD 82 DEGREE) NICKEL COPPER ALUMINUM ALLOY. QQ-N-286G CD/HF, AH AND ANN QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454023 0012: HEX HEAD CAPSCREW 15 EA _______ ______ 5 / 8 “ 11 UNC “ 2A X 1 - 3 / 4 ś LONG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. MS-18116H AMEND “ 1. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454031 0013: HEX HEAD CAPSCREW 15 EA _______ ______ 3 / 4 “ 10 UNC “ 2A X 2 - 1 / 2 ś LONG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454032 0014: HEX HEAD CAPSCREW 10 EA _______ ______ 3 / 4 “ 10 UNC “ 2A X 3 ś LONG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454033 0015: HEX HEAD CAPSCREW 40 EA _______ ______ 1 / 2 “ 13 UNC “ 2A X 2 “ 1 / 4 ś LONG MIL-DTL-1222J TY “ I, NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, FORM “ 2, CD / HF, AH AND ANN. MS-18116H AMEND - 1 QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454034 0016:HEX HEAD CAPSCREW 44 EA ______ ______ 3 / 4 “ 10 UNC “ 3A X 1 “ 5 / 8 ś LONG MIL-DTL-1222J TY “ 1 SELF LOCKING IAW MIL-DTL-1820F. AMEND “ 1 TYPE L OR P, MATERIAL IS NICKEL “ COPPER ALLOY QQ-N-281D, AMEND “ 2 CL A QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454041-2 0017:HEX HEAD CAPSCREW 64 EA ______ ______ 1 / 2 “ 13 UNC “ 3A X 1 “ 3 / 8 ś LONG MIL-DTL-1222J TY “ 1 SELF LOCKING IAW MIL-DTL-1820F. AMEND “ 1 ANY TYPE, MATERIAL IS NICKEL “ COPPER ALLOY QQ-N-281D, AMEND “ 2 CL A QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454043 0018:HEX HEAD CAPSCREW 6 EA ______ ______ 1 “ 8 UNC “ 2A X 2 “ 1 / 4 ś LONG MIL-DTL-1222J TY “ 1 MATERIAL IS NICKEL “ COPPER ALLOY QQ-N-281D, AMEND “ 2 CL A SELF LOCKING IAW MIL-DTL-18240F AMEND “ 1 TYPE L OR P QA 2 CIM MATERIAL DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST REF 33454044 019: EXHIBITS A THROUGH H (A ITEMS 0001-2, B ITEMS 0003-4, C ITEMS 0005-6, D ITEM 0007, E ITEM 0008, F ITEMS 0009 “ 11, G ITEMS 0012 “ 15 AND H ITEMS 0016 “ 18). DD FORM 1423 - CONTRACT DATA REQUIREMENTS LIST: CERTIFICATION OF QUALITY CONFORMANCE. THIS CERTIFICATE SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL & MECHANICAL TEST REQUIRIED BY THE SPECIFICATION. THE TEST RESULTS SHALL BE QUANTITATIVE AND IN THE UNITS REQUIRED BY THE SPECIFICATION. DI-MISC-80678 APPLIES. Delivery Location is Portsmouth Naval Shipyard, Receiving Officer, BLDG 170, Code 501.2, Kittery, ME 03904. FOB destination, delivered pricing required. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.204-7, Central Contractor Registration 52.211-15, Defeense Priority And Allocation Requirements 52.212-1, Instructions to Offerors - Commercial Items; 52.212-4, Contract Terms and Conditions “ Commercial Items 52.215-9023, Reverse Auction 52.223-11 Ozone Depleting Substances 52.232-23, Assignment of Claims 52.233-1, Disputes 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B ”Destination 52.252-2 Clauses Incorporated by Reference 52.252-6, Authorized Deviations in Clauses 52.253-1, Computer Generated Forms 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7003, Control of Government Personnel Work Product 252.204-7004 Alt (A) Central Contractor Registration Alternate A 252.204-7008, Export Controlled Items 252.211-7003 ALT I, Item identification and valuation 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards, 52.209-6 Protecting the Government ™s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment, 52.219-6 Notice of Small Business Set Aside, 52.219-28 Post Award Small Business Program Representation, 52.222-3 Convict Labor, 52.222-19 Child Labor “ Cooperation with Authorities and Remedies, 52.221-21 Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-36 Affirmative Action for Workers with Disabilities, 52.223-18 Encouraging Contractor Policies to Ban Test Messaging While Driving, 52.225-13 Restrictions on Certain Foreign Purchases. Quoters are reminded to include a completed copy of 52.212-3 and it ™s ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items and, DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, DFARS 252.225-7036 Alt I, Buy American ”Free Trade ”Balance of Payments Program, DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports, DFARS 252.225-7039, Contractors Performing Private Security Functions, DFARS 252.227-7013, Rights in Technical Data ”Noncommercial Items, DFARS 252.227-7015, Technical Data ”Commercial Items, DFARS 252.227-7037, Validation of Restrictive Markings on Technical Data, DFARS 252.237-7010, Levies on Contract Payments, DFARS 252.237-7019, Training for Contractor Personnel Interacting with Detainees, DFARS 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment To The Cost Bearer, DFARS 252.247-7024, Notification of Transportation Of Supplies By Sea, DFARS 252.247-7023 Alt III Transportation of Supplies by Sea. This announcement will close at 3:00 on Jan 10, 2014. The Point of Contact for this solicitation is Donna Getz who can be reached at 207-438-2386 or email donna.j.getz@navy.mil. [A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may submit a quote which shall be considered by the agency. Offers will be evaluated for split award based on economic benefit to the government. 52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of price, technically acceptable low bids and past performance. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. METHOD OF PROPOSAL SUBMISSION: The NECO website has a śsubmit bid ť button next to the solicitation number. DO NOT use the śsubmit bid ť button on NECO to submit your proposal. Bids by email are not acceptable. Please submit bids via fax at: 207-438-1251 or through the mail to: Donna Getz Code 503.dg Bldg 153, 6th Floor Portsmouth Naval Shipyard Kittery, Maine 03904 All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/153178e38add2e4f5aa4ac7813ffb8d0)
Place of Performance: Address: PORTSMOUTH NAVAL SHIPYARD; Zip Code: RECEIVING OFFICER BUILDING 170
Record: SN03253316-W 20131219/131217235130-153178e38add2e4f5aa4ac7813ffb8d0 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

53 -- Socket and hex head cap screws, and machine screws.