SOLICITATION NOTICE
59 -- ROTARY WING TEST STAND 75 HP ELECTRIC MODEL MOTOR
- Notice Date
- 1/16/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 335312
— Motor and Generator Manufacturing
- Contracting Office
- NASA/Ames Research Center, JA:M/S 241-1, Moffett Field, CA 94035-0001
- ZIP Code
- 94035-0001
- Solicitation Number
- NNA14495120Q-ATJ
- Response Due
- 2/1/2014
- Archive Date
- 1/16/2015
- Point of Contact
- Timothy B. Joyce, Contract Specialist, Phone 650-604-0395, Fax 650-604-0912, Email timothy.b.joyce@nasa.gov - Rhonda F LaBron, Contracting Officer, Phone 650-604-4685, Fax 650-604-4984, Email Rhonda.F.LaBron@nasa.gov
- E-Mail Address
-
Timothy B. Joyce
(timothy.b.joyce@nasa.gov)
- Small Business Set-Aside
- N/A
- Description
- NASA/ARC has a requirement for an identical 75 HP electric motor to work in tandem with the existing motor for use in a rotorcraft test stand through a combining gear box. The size of the test stand cylinder to which the motor must fit is 17 inches long with a 5.5 diameter. The motor requirements are as follows: It shall be a 6 pole 3 phase variable frequency motor producing 75 hp in continuous operation up to 8000 RPM. The motor shall be water cooled and operate at no greater than 250 degrees F at full power. Motors cooled by air circulation are not an appropriate alternative due to the small size of the test stand and its utilization area. The utilization area is only 18 inches high by 24 inches wide. The form of the motor shall be a cylinder with output shaft and mounting ring at one end and power, water, temperature and RPM sensor input/output at the opposite end. Temperature measurement sensors shall be J type thermocouples located at both end bearings as well as in the stationary windings. RPM sensor shall be a hall-effect sensor outputting 60 pulses/revolution of the motor shaft. Motor manufacture and positive testing shall be performed at the manufacturers facility prior to delivery of the completed fully operational to specifications product. Delivery shall be no longer than 30 weeks ARO. In accordance with FAR 13.106(b)(1), NASA/ARC intends to purchase a Aerophysics Research Instruments 75 HP Electric Motor from Aerophysics Research Instruments. The identical electric motor to be produced will work in tandem with the existing motor configured to work with the existing power and control system designed for its use. The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on January 23, 2014 to timothy.b.joyce@nasa.gov. Such capabilities/qualifications may be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/ARC/OPDC20220/NNA14495120Q-ATJ/listing.html)
- Record
- SN03268902-W 20140118/140116234047-18fc3c047ba75aea6a3717fc52e94d9a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |