SOLICITATION NOTICE
13 -- Synopsis
- Notice Date
- 1/23/2014
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FD20201477039
- Archive Date
- 3/25/2014
- Point of Contact
- Jason Smurthwaite, Phone: 8017776402, Trevor Braswell, Phone: 8017756966
- E-Mail Address
-
jason.smurthwaite@hill.af.mil, trevor.braswell@hill.af.mil
(jason.smurthwaite@hill.af.mil, trevor.braswell@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201477039 Item: 0001 NSN: 1377002615371ES AERIAL REFUELING RECEPTACLE CTG P/N: 21084-7, P/N: 68-710057-203, Description: CARTRIDGE,IMPULSE|3A|0.875 INCHES NOMINAL|2.510 INCHES NOMINAL|0.600 INCHES NOMINAL|0.750-20|F-15 ACFT|ELECTRIC|INCLUDED|NOT INCLUDED|INCLUDED|UNEF|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|0.670 INCHES NOMINAL|EXWT|1377-M948|UN0276|EX1988050731|0.0013 STORAGE POUNDS AND 0.0013 TRANSPORTATION POUNDS|0.3 SHIPPING CONTAINER POUNDS|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|2.00 INCHES SHIPPING CONTAINER|5.00 INCHES SHIPPING CONTAINER|3.00 INCHES SHIPPING CONTAINER|1|CARTRIDGES, POWER DEVICE|1.4C Supp. Description: M948. The requirement of this CLIN applies to all subsequent CLINS (0001AA-0001AD). Quantity: 0.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477039 Item: 0001AA NSN: SAME Same as basic item above Description: Quantity: 22.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477039 Item: 0001AB NSN: SAME Same as basic item above Description: Quantity: 11.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477039 Item: 0001AC NSN: SAME Same as basic item above Description: Quantity: 70.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477039 Item: 0001AD NSN: SAME Same as basic item above Description: Quantity: 108.0000 EA Destn: FV2172,HILL AIR FORCE BASE,UT,84056-5707. Delivery: 30 SEP 2014 On or Before, 108.00 EA PR Number(s): FD20201477039 Item: 0002 NSN: DATA DATA IAW DD 1423-1 ATTACHED HERE TO EXHIBIT A Description: A007 AMMUNITION DATA CARD Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *6 Months *ARO IAW DD1423, 1.00 MM PR Number(s): FD20201477039 Item: 0003 NSN: DATA DATA IAW DD 1423-1 ATTACHED HERE TO EXHIBIT A Description: A005 TEST/INSPECTION REPORT, A006 FAILURE ANALYSIS AND CORRECTIVE ACTION REPORT, A004 LOT ACCEPTANCE TEST PLAN Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *6 Months *ARO IAW DD1423, 1.00 MM Duration of Contract Period: Estimated Delivery 30 SEPT 2014 Electronic procedure will be used for this solicitation. To: NAMMO TALLEY, INC., MESA, AZ.,85215-1210. To: BOEING COMPANY, THE, SAINT LOUIS, MO.,63134-1939. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.fbo.gov Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. To include all required reports and data. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FD20201477039/listing.html)
- Record
- SN03272693-W 20140125/140123234154-9ab884b3ac0143939591537f5137224d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |