FBODaily.com | FedBizOpps: PRESOL | B | DEVELOPING A CYTOGENETIC BIODOSIMETERY SYSTEM - COPY OF SYNOPSIS

FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 06, 2014 FBO #4457
SOLICITATION NOTICE

B -- DEVELOPING A CYTOGENETIC BIODOSIMETERY SYSTEM - COPY OF SYNOPSIS

Notice Date: 2/4/2014
Notice Type: Combined Synopsis/Solicitation
NAICS: 541690 — Other Scientific and Technical Consulting Services
Contracting Office: Other Defense Agencies, Uniformed Services University of the Health Sciences, UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES (USUHS), 4301 JONES BRIDGE ROAD, Bethesda, Maryland, 20814-4799, United States
ZIP Code: 20814-4799
Solicitation Number: HU0001-14-Q-0190
Archive Date: 3/21/2014
Point of Contact: Christina Johnson, Phone: 3012953069, Zamora Olin, Phone: 301-295-3922
E-Mail Address: christina.johnson@usuhs.edu, Zamora.Olin@usuhs.edu
(christina.johnson@usuhs.edu, Zamora.Olin@usuhs.edu)
Small Business Set-Aside: Total Small Business
Description: COPY OF SYNOPSIS This requirement is set-aside for small businesses only. The Uniformed Services University of the Health Sciences (USUHS), located on the Walter Reed National Military Medical Center (WRNMMC), Bethesda, MD, intends to solicit offers for a consultant(s) to assist developing a cytogenetic biodosimetry system to estimate radiation doses in radiation accidents and overexposures. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. The solicitation number is HU0001-14-Q- 0190, and it is being issued as a Request for Quotations (RFQ). This request for quotes (RFQ) for commercial items is in accordance with FAR Part 12 - Acquisition of Commercial Items and FAR Part 13 - Simplified Acquisition Procedures. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-72, effective January 30, 2014. This document is available for download at Federal Business Opportunities (FedBizOpps) website, https://www.fbo.gov, reference number: HU0001-14-Q-0190. In accordance with FAR Subpart 16.4, this is a firm-fixed price contract. This requirement will be competed as a set-aside for small businesses. The following North American Industry Classification System (NAICS) codes are applicable: 541690, Other Scientific and Technical Consulting Services, with a size standard of $14.0 541990, All other Professional, Scientific and Technical Services, with a size standard of $14.0 E-mail or mailed offers are acceptable. Facsimile offers will not be accepted. All correspondences shall be submitted to Christina Johnson via e-mail at christina.johnson@usuhs.edu. Offerors shall ensure the RFQ solicitation number, HU0001-14-Q-0190, is referenced. POINT OF DELIVERY Location: Armed Forces Radiobiology Research Institute (AFRRI) 8901 Wisconsin Avenue Building 42 Bethesda, MD 20889-5603 I. Price Schedule: The contractor shall furnish all required materials, equipment, documentation and transportation listed herein to accomplish the requested services required for the Uniformed Services University of the Health Sciences. Services shall be performed in accordance with the statement of work as set forth in this solicitation. Price Schedule: The contractor should provide pricing as set up below: Contract Line Number (CLIN), description, and unit of issue. CLIN 0001 BASE YEAR Unit of Issue Unit Cost Total Cost Development of High-throughput Interphase Dicentric Chromosome Aberration biodosimetry system 0001AA Task 1: Automated Cytogenetic Analyses Platform: Design and Implementation JOB 0001AB Task 2: Database Design, Development and Implementation JOB 0001AC Task 3: Cytogenetic Environmental Monitoring Sensory Network JOB 00001AD Task 4: Extended Supervisory Spread Discrimination Application JOB Contract Total $ CLIN 0001 OPTION YEAR 1 Unit of Issue Unit Cost Total Cost Development of High-throughput Interphase Dicentric Chromosome Aberration biodosimetry system 0001AA Task 1: Automated Cytogenetic Analyses Platform: Design and Implementation JOB 0001AB Task 2: Database Design, Development and Implementation JOB 0001AC Task 3: Cytogenetic Environmental Monitoring Sensory Network JOB 00001AD Task 4: Extended Supervisory Spread Discrimination Application JOB Contract Total $ II. STATEMENT OF WORK 1.0 General 1. The contractor shall provide all technical support within the scope of this statement of work. The contractor shall perform tasks, as specified by the individual deliverables areas: Task 1: Automated Cytogenetic Analyses Platform: Design and Implementation; Task 2: Database Design, Development and Implementation; Task 3: Cytogenetic Environmental Monitoring Sensory Network; and Task 4: Extended Supervisory Spread Discrimination Application. The Contractor shall be capable of performing a range of Bioinformatics/Systems biology, computational programming, and robotic and high-throughput instrumentation work to accomplish the project deliverables. 2. The tasks which will be issued through work assignments commonly require expertise in multiple disciplines such as; High-throughput Imaging, Radiation biology, Cytogenetics, Biodosimetry, Robotics, Bayesian systems, Neural Networking systems, Artificial Intelligence, Pathology, Molecular biology, Genetics, Physiology, Decision analysis, Quantitative dose-response assessment, Quantitative uncertainty analysis, GLP, Computer Science & Programming. 3. Under the Dodd 5200.2, Dodd Personnel Security Program, the Government is responsible for maintaining security within AFRRI. All Contractors' personnel will adhere to AFRRI security requirements. All Contractors' personnel must have AMERICAN CITIZENSHIP and valid I. D. to work within AFRRI and to enter the facility. 2.0 Introduction and Overview Armed Forces Radiobiology Research Institute (AFRRI), a tri-service biomedical research laboratory chartered in 1961 and a major component of the Uniformed Services University of the Health Sciences, conducts research in the field of radiobiology and related matters essential to the operational and medical support of the U.S. Department of Defense and the military services. The institute collaborates with other governmental facilities, academic institutions, and civilian laboratories in the United States and other countries. Its findings have broad military and civilian applications. In support of AFRRI/USU and the Dodd military mission, the project Principal Investigator and his lab has established international protocols and have identified the use of gold standard radiation biomarkers to estimate radiation doses in radiation accidents and overexposures. The PI is a SME (subject matter expert) of Artificial Intelligence and Automated systems and has set up a high-throughput prototype system CLASP that has been recognized as a great tool for use during a radiation or nuclear mass-casualty emergency. The entire system demands the use of many robotic instruments and high-throughput automated systems to meet the sample analysis demands and throughput. The whole system is supported by a high-performing computing infrastructure controlled by AI and Bayesian system using neural networking and contextual image mapping framework integrated with high performing computing architecture. 3.0 Project Background Nuclear/radiological exposure risk is eminent and several thousands of individuals may be exposed to radiation in worst-case scenarios. Radiation mass casualties will demand high-throughput individual diagnostic dose assessment for medical management of exposed subjects. Many established cytogenetic assays are generally manually performed, either in part or in whole, and are inadequate for high-throughput requirements, particularly during radiation mass casualty. Because current medical intervention guidelines encourage early administration of cytokines and supportive therapy, timely identification of radiation casualties who will benefit from medical intervention in radiation disasters is critical. Cytogenetic techniques are considered as the "Gold Standard" biological dosimeters for medical management and triage during nuclear radiation mass casualty. In the last decade, a variety of new biodosimetric assays have evolved; Gamma-H2AX, micronuclei, premature chromatin condensation assays etc. Besides these established assays, several new reliable technologies like electron paramagnetic resonance (EPR) dosimetry, gene expression profiling, nanovesicle hydrocell and DNA microarrays are rapidly gaining importance. These technologies are also very useful for the clinical assessment of biological effects of Ionizing Radiation, understanding transcriptome modulations, relational analysis of gene expression data, establishing gene signatures for early transient responses which are of very high interest to the radiobiology and military community and can assist during triage of radiation mass casualty. 4.0 Goals/Objectives The purpose of this project is to develop a rapid, high-throughput, radiation-specific diagnostic biodosimetry system Inter-phase Dicentric Chromosomes Aberrations (IDCA) for individual diagnostic dose estimation, highly specific to radiation exposure, and with a better operating dose-range than the current gold-standard metaphase-spread Dicentric Chromosomes Aberrations (DCA). The project wants to establish an independent ultra-high-throughput radiation dose specific analytical system which can be operational and usable on a cytogenetic laboratory automation platform. The system prototype developed should be integrated with Laboratory Information Management System (LIMS) and should be inter-reportable with complementary biodosimetric assays. The prototype should be able to enumerate and score the image attributes, spatial and spectral features for IDCA. An automatic feature extraction algorithm to support and enhance the specificity and sensitivity of the platform has to be developed and integrated. The system should be able to validate the large-scale sample processing capabilities of the automated high-throughput robotic cytogenetic system for the preparation of abridged short-term whole-blood micro-culture and metaphase spreads for the IDCA. The entire system should be ready to be tested and validated against manual scoring of the samples, should be capable of integration into existing platform and be scalable based on the timely requirements and demands. The prototype should adapt Rational Unified Process and Machine Learning approaches using Vector training and Bayesian algorithms. 5.0 Scope of Work The purpose of this project is to develop an AI-supported high-throughput computational platform, called IDCA to gather and analyze biomarkers and aberrations, expression signatures for radioprotection and biodosimetry. The platform and other auxiliary programming should be supported by Supervised Learning Models (SLMs) for mass-scale analysis and data mining from multitude of disparate data sources. The system should demonstrate automated feature extraction; attribute analysis, storage and integration of cross platform radiation specific biomarker and associated gene expression establishing a high-throughput platform for triage during military medical operation and DOD mission during radiation mass casualty. The platform and its supporting systems should be able to assist in processing of larger-scale sample sets. It should be able to establish baseline requirements thereby assisting in further understanding of processing capacity, vertical, horizontal scalability and addition of other supplementary/complementary biological information repositories. The long-term goal is to develop high-throughput, accurate and specific radiation dose diagnostic assessment platform which can provide efficient and quick help to the military medical operations during mass casualty scenarios. There are four (4) major deliverables within the scope of this project with a time frame of two (2) years. All four (4) major deliverables have to be performed and many concurrently to meet the required scientific milestones of the project. The sub-tasks under each deliverable have to be performed in the same sequence as determined by the project PI, unless upon discussion a scientific rationale is arrived by consensus and the project PI authorizes in writing, the change of the sequence of the sub-tasks of the deliverables. 6.0 Tasks and Deliverables The deliverables are sequentially dependent and provide progressive basis for high-throughput ACAP infrastructure development. It's expected that each sub-task should be followed/implemented sequentially to complete each deliverable to deem as completed deliverable for invoicing. 1. Automated Cytogenetic Analyses Platform; Design & Implementation The Automated Cytogenetic Analyses Platform (ACAP) HT-MMS system flowchart below gives a very detailed flow chart of the expected deliverables: design, implementation, testing & integration with the existing already developed platform (hardware and software integration). ACAP should be built upon available hardware and software components and should be ready to be highly customized for specific applications. The ACAP system should be able to significantly reduces human error in performing repetitive tasks, help in increasing productivity and throughput, free lab personnel and helps in providing more repetitive and reliable scientific reliable data obtained using good laboratory practice (GLP) guidelines. The entire ACAP pipeline which would include the entire robotic engineered system for high-throughput along with all the system components fully integrated and enclosed in a lab safety level-II enclosure should be implemented on a flexible 2-ply delivery system with the specific deliverables or milestones set within each sub-task. The hardware architecture for base platform implementation should be designed and set forth to provide sample management and administration of required cytogenetic assays. The system should support concurrent execution of multiple analysis jobs per biomarker/array and generation of per-well output. Platform should support high-quality data and attribute extraction. Perform Operating System implementation; hardware fabrication, network connectivity to local nodes; user control for information segregation. The system design should be capable of parallel execution and use of grid-based computing facilities such as SGE, MPI-CH or MPI-CH2. The platform should be able to utilize batch processing facilities and cross-cluster linkages for temporal information retrieval. Horizontal expansion of computation capacity should be supported through addition of array-worker nodes. A reporting console a.la web-based management dashboard should be provided in order to manage platform system components. Develop, integrate and customize an Enterprise Service Bus (ESB). Fabricate and design a prototype platform implementation which will support multi-faceted and concurrent execution of numerous biomarker/array analysis jobs. Accounting, Authorization and Authentication (AAA) management system should be designed and implemented to integrate highly customized message service bus-based plugin architecture with an object-oriented matching search interface. Utilization of a component based architecture. Perform testing of platform prototype scalability; benchmark bandwidth and connectivity; hardware programming of platform resources to utilize I/O tunneling. Integrate with existing network and LIMS architecture with scatter/gather-style capabilities; benchmark bandwidth & connectivity, feasibility, validation and proof-of-principle for VPN, debugging and system validation along with user documentation. Implementation of tools and programming to support modeling of biomarker data sets. Facilitate high-throughput performance requirements of analyzing incoming biomarker and dosimetry data points from multiple sources. Perform hardware and software programming for multi-core enhanced software libraries (MPI, OpenMP, etc) and processor- specific data copy-in/copy-out assembly/op-codes. Rapid servicing and dispatch of incoming requests on timely basis to keep scheduling pipeline fully saturated. Use N-tier architecture for platform scalability and resource utilization flexibility in processing of numerous microarray configurations at a time. 2. Database Design, Development and Implementation Design Entity Relationship Models (ERMs) for the underlying database information store. Appropriate use case models should be developed for interaction with the DB entities and schemas. Support storage of ephemeral or permanent data points and other information vectors onto MySQL-backend systems. Schema should utilize compact data types for space efficiency in order to support large data sets. Implement high-throughput DB-level clustering for latency reduction in I/O tunneling. Concurrent access from multi-core kernels should be supported on the Schemas. Implement a caching engine to mediate between the database servers and client processes and threads. Perform system compatibility analysis with POSTGRESS/SQL for object-oriented database management extensions; SQL scripts for data query and data analyses, optimized search organization, heterogeneous systems data portability checks. Integrate the database information views with existing LIMS backend storage. Perform user bandwidth testing; packet transmission checks; Read/Write/Update latency analysis and delay assessments. Implement entity and schema- level optimizations using partitioning and master/slave-style replication for performance. DB management system should perform load among multiple slaves to improve performance. In this environment, all writes and updates must take place on the master server. Reads, however, may take place on one or more slaves. Stored procedures and subroutines should be built into the DBMS to reduce query execution times for rapid analysis operations per array worker. Cross-link with external data sources and perform scheduled management for automatic update and synchronization, in order to facilitate rapid and updated cross-analysis. The software should interface with well-known Bioinformatics and Bio databank application programming interfaces, ABIs and libraries. In addition, the system should integrate with high- performance machine-optimized numerical integration and scientific computation packages. 3. Cytogenetic Environmental Monitoring Sensory Network Designing and Implement a Cytogenetic Environmental Monitoring Sensory Network; various environmental factors such as temperature, humidity and wetness play a huge role in the QC/QA mechanisms, results and obtainable throughput. A direct co-relation can be established with some of these factors and its effect on overall sensitivity and specificity of cytogenetic assays and their underlying statistical models for dose estimation. Temperature and humidity affects samples over time, which will consequently affect the quality of slides that are prepared for scoring Dicentric and IDCA. Keeping an effective record and monitoring of all the temperature and humidity changes in the environment, among other environmental sensory vectors is essential for achieving higher quality end-point assay results and co-relating it with current and/or archived experiments in the HT-MMS for scientific purposes. Highly accurate network-enabled environmental sensors for temperature, humidity, wetness as well as data loggers to track temperature within shipping containers should be integrated into shipments of blood samples for radiation biodosimetry. Each of the outlined sub task should be followed to design and implement an effective Cytogenetic Environmental Monitoring Sensory Network.  Evaluate current sensory infrastructure and storage environment  Assessment of network message processing latency for high-content sensory data  Determine optimum and minimum periodic monitoring interval for sensory logging  Fabrication of common environmental monitoring use cases for known lab scenarios  Design of schema entities suitable for persistent storage of monitoring data  Design of de-novo data entry protocol suitable for high-content data logging  Design and development of scatter/gather processing abilities  Design and develop integration service channel to the HT-MMS system module  Design and develop multi-format, multi-source parser of sensor logs  Design tracking and monitoring system module for installed sensor vectors  Design and develop dynamic sensor tracking and administration system  Design and develop linkage system with storage locations in the HT-MMS  Query-capable monitoring for interval analysis and chart-based reporting  Develop role-based permission access model to sensor charts and reports  Design reporting capabilities per sensor device or group of devices  Build support for cross-platform functional availability of EMS interface  Build adaptable front-end capable and usable from mobile/tablet platforms  Build server-side computation and reporting-based presentation technologies  Design multi-format export capabilities, such as CSV, XML and PDF 4. Extended Supervisory Spread Discrimination Application Design an extended supervisory spread discrimination application to discriminate metaphase cell spreads from whole slide imaging device at various low magnifications at ultra-high-throughput. The application should be able to discriminate metaphase cell spreads from whole slide imaging device at various low magnifications at using high- throughput processing layer. The system should be capable of using advanced spread classification capabilities based on multi-parametric quasi-supervised AI-supported collection of inference algorithms. The Schema-enabled backbone should be able to support essential map/reduce style capabilities in order to exploit latest advances in parallel processing technologies. The application should also support bio-statistical profiling exports in order to support other event processors in the ACAP analyses pipeline. The SSDA application algorithm should be capable of producing thumbnails of spreads selected in high-throughput for further analyses, classification and scoring.  Design and develop high-throughput processing layer  Create high-speed ultra-low latency in-memory spread image buffer management layer  Establish message service channel for integration with other components  Develop modular integration points with HT-MMS system module  Create module architecture for ability to accept multiple input image file formats Create integration hooks to accept output from slide imaging system  Develop the removal of non-consequential outliers to improve detection SNR  Design and develop spread quality and usability ranking matrices  Design and develop spatial segmentation of spread locations  Design spatial quantitative vectors for annotation purposes  Design fast thumbnail production of discriminated spreads and supervisory indices  Design multi-format export capabilities, such as CSV, XML and PDF modules  Create collection warehouse for housing heuristic data from processing runs  Establish profiling capability for temporal and spatial vectors for slide images  Simulation and Testing 7.0 Personnel Qualifications Except as otherwise authorized in writing by the Contracting Officer, the Contractor shall ensure that each employee meets the following minimum criteria: 7.1 The consultant MUST be ready and have the ready expertise to start on the project right away; ZERO tolerance for learning on the job or inflated expertise. 7.2 The consultant will contribute to systems programming and support application development, working closely with Project Principal Investigator (PI) in his AI and computational programming efforts, applied biostatistics, data mining, and algorithm development efforts to automate cytogenetic analysis and develop IDCA. 7.3 The consultant MUST be expert in robotic instrumentation, shell scripting, or a C# developer. 7.4 The consultant will develop scripts, customize robotic high throughput equipment, develop interfaces for robotic equipment and develop graphic user interfaces (GUI) and provide user friendly functionalities. 7.5 Should be an expert with Information Management System and help in the integration of SOW within the database architecture. 7.6 The consultant should be highly proficient in automation of existing manual processes into software pipelines. 7.7 The Consultant MUST have extensive expertise in database (ORACLE/MySQL) development and administration in highly professional industrial environment. 7.8 Bioinformatics/Systems biology, implementation and support of algorithm development and automation of research designs are a MUST. 7.9 The consultant MUST have excellent programming, scripting, shell and web knowledge and experience. 7.10 The consultant should have expertise and prior experience with IIS 5/6, Apache 2.0, SSL, NAT, DNS, WINS, TCP/IP, FreeBSD, NetBSD, Linux, Solaris 7/8, HP-UX 10/11. 7.11 The consultant should be an expert with at least three of these languages C/C++, Python, AWK, VB & VBA, CSH, PERL, JAVA, ASP,.NET, and R. 7.12 The consultant should have experience in designing a secure network and GRID frame work for multi-processing architectures. 7.13 A strong knowledge of Bioinformatics and application development is necessary. 8.0 Reporting, Timelines and Evaluation of Progress This contract shall be for one base year and one option year. The estimated contract period of performance will begin February 24, 2014 through February 23, 2015. The Contractor is required to provide a detailed work progress report to the Project Principal Investigator (PI) upon completion of each listed deliverable in a timely fashion (mutually agreed upon). Demonstration (on-site or in some cases a VPN established WebEx with prior written approval from Project PI of the completed deliverable is mandatory before invoicing or start of the next deliverable. Upon successful completion of sequentially listed sub-tasks, the PI would recommend continuation or may request the changes or cancel the work effort by the consultant. III. PROVISIONS/CLAUSES INCORPORATED BY REFERENCE 52.202-1 Definitions NOV 2013 52.203-3 Gratuities APR 1984 52.203-6 Alt I Restrictions on Subcontractor Sales to the Government OCT 1995 52.203-12 Limitation On Payments To Influence Certain Federal Transactions OCT 2010 52.204-2 Security Requirements AUG 1996 52.204-4 52.204-7 52.212-1 Printed or Copied Double Sided on Postconsumer Fiber Content Paper System for Award Management Instructions to Offerors - Commercial Items MAY 2011 JUL 2013 JUL 2013 52.215-8 Order of Precedence--Uniform Contract Format OCT 1997 52.222-22 52.222-25 52.222-50 Previous Contracts and Compliance Reports Affirmative Action Compliance Combating Trafficking in Persons FEB 1999 APR 1984 FEB 2009 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving AUG 2011 52.227-1 Authorization and Consent DEC 2007 52.229-3 52.232-1 Federal, State, and Local Taxes Payments FEB 2013 APR 1984 52.232-9 Limitation On Withholding Of Payments APR 1984 52.232-11 52.233-1 Extras Disputes APR 1984 JUL 2002 52.233-4 52.237-1 Applicable Law for Breach of Contract Claim Site Visit OCT 2004 APR 1984 52.237-2 Protection Of Government Buildings, Equipment, And Vegetation APR 1984 52.242-13 Bankruptcy JUL 1995 52.246-4 52.249-4 Inspection of Services - Fixed Price Termination For Convenience Of The Government (Services) Short Form) AUG 1996 APR 1984 52.251-1 Government Supply Sources APR 2012 252.201-7000 Contracting Officer's Representative DEC 1991 252.204-7000 Disclosure Of Information DEC 1991 252.204-7004 Central Contractor Registration (Alternate A SEP 2007 252.204-7006 Billing Instructions OCT 2005 252.223-7006 Prohibition On Storage And Disposal Of Toxic And Hazardous Materials APR 1993 252.226-7001 Utilization of Indian Organizations and Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns SEP 2004 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment MAR 1998 IV. PROVISIONS/CLAUSES INCORPORATED BY FULL TEXT 52.212-3 Offeror Representations and Certifications-Commercial Items. OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS (NOV 2013) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation", as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Sensitive technology"- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it o is, o is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it o is, o is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it o is, o is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is, o is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It o is,o is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It o is, o is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (10) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either- (A) It o is, o is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the SAM Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It o has, o has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) o Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that- (i) It o is, o is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It o is, o is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246- (1) Previous contracts and compliance. The offeror represents that- (i) It o has, o has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It o has, o has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that- (i) It o has developed and has on file, o has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or (ii) It o has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Supplies." (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) o Are, o are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) o Have, o have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; (3) o Are, o are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) o Have, o have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed end products. Listed End Product Listed Countries of Origin ___________________ ___________________ ___________________ ___________________ (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) o In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) o Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] [ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror o does o does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for themaintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. [ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror o does o does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). o TIN: ________________________________. o TIN has been applied for. o TIN is not required because: o Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; o Offeror is an agency or instrumentality of a foreign government; o Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. o Sole proprietorship; o Partnership; o Corporate entity (not tax-exempt); o Corporate entity (tax-exempt); o Government entity (Federal, State, or local); o Foreign government; o International organization per 26 CFR 1.6049-4; o Other ________________________________. (5) Common parent. o Offeror is not owned or controlled by a common parent; o Name and TIN of common parent: Name ________________________________. TIN _________________________________. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (End of provision) 52.212-4 Contract Terms and Conditions-Commercial Items. CONTRACT TERMS AND CONDITIONS-COMMERCIAL ITEMS (SEPT 2013) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights- (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601-613). Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include- (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, contract line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment.- (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR Part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall- (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the- (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected contract line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in Section 611 of the Contract Disputes Act of 1978 (Public Law 95-563), which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if- (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on- (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. 3701, et seq., Contract Work Hours and Safety Standards Act; 41 U.S.C. 51-58, Anti-Kickback Act of 1986; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. 423 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments. (9) The specification. (t) System for Award Management (SAM). (1) Unless exempted by an addendum to this contract, the Contractor is responsible during performance and through final payment of any contract for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (2)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in FAR Subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to (A) change the name in the SAM database; (B) comply with the requirements of Subpart 42.12; and (C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide with the notification sufficient documentation to support the legally changed name. (ii) If the Contractor fails to comply with the requirements of paragraph (t)(2)(i) of this clause, or fails to perform the agreement at paragraph (t)(2)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (3) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (4) Offerors and Contractors may obtain information on registration and annual confirmation requirements via SAM accessed through https://www.acquisition.gov. (u) Unauthorized Obligations (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an "I agree" click box or other comparable mechanism (e.g., "click-wrap" or "browse-wrap" agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS (JAN 2014) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). _X__Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). _X_ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug 2013) (31 U.S.C. 6101 note). __ (7) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313). _X_ (8) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). __ (9) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a). _X_ (10) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (11) [Reserved] _X_ (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644). __ (ii) Alternate I (Nov 2011). __ (iii) Alternate II (Nov 2011). __ (13)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. _X_ (14) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)). __ (15)(i) 52.219-9, Small Business Subcontracting Plan (Jul 2013) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. __ (iv) Alternate III (Jul 2010) of 52.219-9. _X_ (16) 52.219-13, Notice of Set-Aside of Orders (Nov 2011)(15 U.S.C. 644(r)). _X_ (17) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)). __ (18) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (19)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I (June 2003) of 52.219-23. __ (20) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Jul 2013) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (21) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f). _X_ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)). __ (24) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)). __ (25) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Jul 2013) (15 U.S.C. 637(m)). _X_ (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __ (27) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126). _X_ (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). _X_ (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). _X_ (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). _X_ (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). _X_ (32) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212). _X_ (33) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). _X_ (34) 52.222-54, Employment Eligibility Verification (AUG 2013). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (36) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). __ (37)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). __ (ii) Alternate I (DEC 2007) of 52.223-16. _X_ (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513). __ (39) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (40)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (Nov 2012) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43). __ (ii) Alternate I (Mar 2012) of 52.225-3. __ (iii) Alternate II (Mar 2012) of 52.225-3. __ (iv) Alternate III (Nov 2012) of 52.225-3. __ (41) 52.225-5, Trade Agreements (NOV 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). _X_ (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (43) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). __ (44) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (45) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (46) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __ (47) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). _X_ (48) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) (31 U.S.C. 3332). __ (49) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332). _X_ (50) 52.232-36, Payment by Third Party (Jul 2013) (31 U.S.C. 3332). __ (51) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). __ (52)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). __ (7) 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O.13495). __ (8) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). __ (9) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (AUG 2013). (xiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.217-8 Option to Extend Services. OPTION TO EXTEND SERVICES (NOV 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days. (End of clause) 52.217-9 Option to Extend the Term of the Contract. OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within _15 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed two years. (End of clause) 52.252-2 Clauses Incoporated By Reference. Clauses Incoporated By Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil. (End of clause) V. EVALUATION FACTORS 52.212-2 Evaluation-Commercial Items. Evaluation-Commercial Items (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: 1) Technical: Demonstrated understanding and expertise of High-throughput Imaging, Radiation biology, Cytogenetics, Robotics, Bayesian systems, Neural Networking systems, Artificial Intelligence, Molecular biology, Decision analysis, Quantitative dose-response assessment, Quantitative uncertainty analysis, GLP, Computer science & Programming. A good understanding and demonstrated expertise of bioinformatics applications, JAVA programing and implementation, GRID design& implementation, LIMS design and implementation, Good GLP understanding and know-how to transform the bench assays into software algorithm based analyses along with a strong prototype development experience. 1a)Staff Capabilities: Provide resumes of the individuals who will be assigned to work resulting from this RFQ. Resumes must be sufficiently detailed to permit assessment of the capability of the assigned individuals to perform the work as outlined in the Statement of Work. 2) Past Performance: The Government is requesting offerors submit additional relevant and similar references that demonstrate capabilities in your organization's ability to fulfill the requirements of this procurement. Past performance should be no more than three (3) years old. The Government will determine the extent to which an offeror's experience is similar in size, scope and complexity to the Government's requirements under this solicitation. The following information must be provided for each customer reference: ● Name of agency and/or business and address ● Name of current point of contact, including telephone number and e-mail address ● Contract number ● Contract value ● Contract performance period ● Brief description of services provided Technical and past performance, when combined, are more important to price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) VI. QUESTIONS Questions regarding this solicitation that requires clarification or additional information must be submitted in writing via e-mail to Christina Johnson at christina.johnson@usuhs.edu by February 12, 2014, 12:00 PM EST. The e-mails must reference solicitation number, HU0001-14-Q- 0190 (subject header). Questions will not be answered over the phone. All questions will be addressed by an amendment to the solicitation. Questions received after February 12, 2014, 12:00 PM EST, will not be answered and will be considered late. All questions must reference the page number, section, and/or paragraph of the solicitation. It will be the responsibility of the contractor to check the website, http://www.fbo.gov, for any issuance of any amendments and/or updates to this requirement. VII. PROPOSAL SUBMISSION Email or mailed proposals will be accepted at christina.johnson@usuhs.edu. Facsimile proposals will not be accepted. Proposals submitted in this format will be rejected. Firms are advised that access onto the WRNNMC base and on base parking is restricted; therefore delivery in person is not advised. The Government will not consider proposals delayed at the security posts nor be responsible to provide base access. Proposals can be mailed to the following designated office: Uniformed Services University of the Health Sciences Contracting Directorate 4301 Jones Bridge Road Bldg. A, Rm. 1040C Bethesda, MD 20814-4799 Attn: Ms. Christina Johnson HU0001-14-Q- 0190 Proposals are due on March 6, 2014 at 12:00PM eastern local time. Late proposals will not be considered. It is the contractor's responsibility to ensure that proposals and completed past performance questionnaires arrive to the designated office by the closing date and time. All offerors are advised that registration in the System for Award Management (SAM) (https.//www.sam.gov) is mandatory. All contractors doing business with the Federal Government must be registered in the database. Offerors should include their Data Universal Numbering System (DUNS) number in their quotes. The CO will verify registration prior to award. Please ensure that a business size is listed for this requirement under the applicable NAICS codes. FAILURE TO COMPLETE THE REGISTRATION PROCEDURES OUTLINED IN THIS PROVISION MAY RESULT IN ELIMINATION FROM CONSIDERATION FOR AWARD.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/3056fc38121ad8dd03de5e2799450c44)
Record: SN03281227-W 20140206/140204235826-3056fc38121ad8dd03de5e2799450c44 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

B -- DEVELOPING A CYTOGENETIC BIODOSIMETERY SYSTEM - COPY OF SYNOPSIS