SOURCES SOUGHT
N -- TOOL VENDING MACHINE SERVICE
- Notice Date
- 2/18/2014
- Notice Type
- Sources Sought
- NAICS
- 541513
— Computer Facilities Management Services
- Contracting Office
- ACC - Warren (ACC-WRN)(ANAD), ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue, Anniston, AL 36201-4199
- ZIP Code
- 36201-4199
- Solicitation Number
- W911KF-14-S-0003
- Response Due
- 3/3/2014
- Archive Date
- 4/19/2014
- Point of Contact
- Morey Gaddy, 256-741-5227
- E-Mail Address
-
ACC - Warren (ACC-WRN)(ANAD)
(troy.m.gaddy2.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This Sources Sought Notice is for market research purposes only. This is NOT a request for quotes or proposals. This is a sources sought to establish the requirement of a tool vending machine service for Anniston Army Depot (ANAD), Anniston, Alabama. The requirement is for a tool vending machine and shall not exceed 1 year. The unit(s) shall be installed by the Interested Party with all functions, capabilities and equipment as described herein. The Interested Party shall provide all resources necessary to deliver, install, calibrate, demonstrate functional operation, set up software and programs to provide all reports to authorizes personnel, and provide employee and supervisor training for the vending machine(s). The Interested Party owns the vending machine(s), while the government owns the tooling inventory inside the machine(s). The Interested Party shall be responsible for the following, but not limited to: (1) Installation of the tool vending machine(s) and software, (2) Maintenance of the tool vending machine(s) and software. In the event of a tool vending machine failure there must be an over ride system in order to be able to retrieve tooling from the vending machines, (3) Stock all tooling ANAD currently has in on-hand. No new tooling shall be stock into the vending machine until all ANAD current inventory is exhausted, (4) Maintain adequate levels of tool inventory in the tool vending machine(s) at all times. Restock of inventory within 48 hours of the minimum inventory. This includes restocking of tooling, resetting count of tooling in tool vending machine, reports on what tooling has been restocked and reports to COR or appointed personnel, (5) Repair or replacement of machine(s) upon failure notice from the COR, (6) All tooling that is to be supplied by the Interested Party must be brand name or equal. Required Tool List will be provided in the solicitation. There will be a technical evaluation conducted during the solicitation phase, (7) The Interested Party shall have a scanner or a similar device that will have the ability to read work order bar codes or keyboard system on the tool vending machine that will allow work orders to be scanned or typed into the tool vending machine. IMPORTANT NOTE: Interested Parties shall also have the capability to: (1) Have a scanning device that will capture the following information utilizing Department of the Army Common Access Card (CAC), (2) Supply a Certificate of Net Worthiness (CON) for the tooling vending machine, (3) Ability to develop a interface between the tool vending system and ANAD current control system which is Automated Tool Inventory Control and Tracking System (ATICTS). (4) Must be registered in the System for Award Management (SAM) in order to be considered for possible contract award. The Anniston Army Depot is seeking responses from all responsible sources, including large, and small business concerns. Small business concerns are defined under the associated North American Industry Classification (NAICS) code for this effort, 541513, Computer Facilities Management Services; Size Standard is $25.5M. Please include your company's size classification and socio-economic status in any response to this notice. Responses to this notice must be submitted electronically to the Contract Specialist T. Morey Gaddy, troy.m.gaddy2.civ@mail.mil (telephone inquiries will not be accepted or acknowledged). quote mark Tool Vending Machine Service quote mark must appear in the subject line of the email or it will be deleted and not read. Responses must be received no later than 3 March 2014 at 9:00 A.M. (CST) and must include the following: 1. Prospective firm's name, address, phone number, socioeconomic status and DUNS number 2. General information of firm's previous experience on no more than three projects of a similar scope, complexity and value; including the title, location, brief description of work, and dollar value Responses should be quote mark short and to-the-point quote mark and limited to one page. This Request For Information (RFI) is issued for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. The Government is under no obligation to issue a solicitation or to award a contract related to this project. NO FURTHER INFORMATION IS AVAILABLE AT THIS TIME. THIS RFI IS FOR MARKET RESEARCH ONLY. This RFI will expire on 3 March 2014 at 9:00 A.M. CST.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/516130fae159b1bbe87f8f7ac7ffe4aa)
- Place of Performance
- Address: ACC - Warren (ACC-WRN)(ANAD) ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue Anniston AL
- Zip Code: 36201-4199
- Zip Code: 36201-4199
- Record
- SN03290542-W 20140220/140218234604-516130fae159b1bbe87f8f7ac7ffe4aa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |