SOLICITATION NOTICE
13 -- INITIATOR, CARTRIDGE ACTUATED
- Notice Date
- 2/24/2014
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; AFLCMC EBHK;6033 ELM LN BLDG 1247; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8213-14-R-3026
- Response Due
- 4/10/2014
- Archive Date
- 7/9/2014
- Point of Contact
- Stephanie San Juan, Phone 801-775-4374, Fax 801-777-5840, Email stephanie.sanjuan.1@us.af.mil
- E-Mail Address
-
Stephanie San Juan
(stephanie.sanjuan.1@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201477034 Item: 0001 NSN: 1377002380552ES INITIATOR P/N: 2130300-1, P/N: 32-72317, P/N: 6124100, Description: INITIATOR,CARTRIDGE ACTUATED|4.680 INCHES NOMINAL|F-4 ACFT|INSTANTANEOUS|GAS|INCLUDED|EXWT|1377-M720... : 0.0000 PR Number(s): FD20201477034 Item: 0001AA NSN: SAME Same as basic item above Quantity: 100.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477034 Item: 0001AB NSN: SAME Same as basic item above Quantity: 167.0000 EA Destn: FV2172,HILL AIR FORCE BASE,UT,84056-5707. Delivery: 30 SEP 2014 On or Before, 167.00 EA PR Number(s): FD20201477034 Item: 0002 NSN: 1377002380554ES INITIATOR,CARTRIDGE ACTUATED P/N: 21301900-2, P/N: 32-72317-21, P/N: 6121100, Description: INITIATOR,CARTRIDGE ACTUATED|4.680 INCHES NOMINAL|F-4 ACFT|NOT ASSIGNED|TIME DELAY|GAS|INCLUDED|0.75... Quantity: 0.0000 EA PR Number(s): FD20201477034 Item: 0002AA NSN: SAME Same as basic item above Quantity: 40.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477034 Item: 0002AB NSN: SAME Same as basic item above Quantity: 26.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477034 Item: 0002AC NSN: SAME Same as basic item above Quantity: 20.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201477034 Item: 0003 NSN: DATA Description: A007 AMMUNITION DATA CARD Supp. Description: NOTE: Approved Ammunition Data Cards (A007), with respective CDRL, shall be attached electronically... Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *6 Months *ARO IAW DD 1423-1, 1.00 MM PR Number(s): FD20201477034 Item: 0004 NSN: DATA Description: A005 TEST/INSPECTION REPORT, A004 LOT ACCEPTANCE TEST PLAN Supp. Description: NOTE: Each respective CDRL shall be attached electronically in WAWF using DOD... Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *6 Months *ARO IAW DD 1423-1, 1.00 MM PR Number(s): FD20201477034 Item: 0005 NSN: DATA Description: A001 ENGINEERING CHANGE PROPOSAL, A002 NOTICE OF REVISION, A003 REQUEST FOR VARIANCE, A006 FAILURE A... Supp. Description: NOTE: Each respective CDRL shall be attached electronically in WAWF using DOD... Quantity: 1.0000 LO Destn: IAW1423,,, -. Delivery: *6 Months *ARO IAW DD 1423-1, 1.00 MM Electronic procedure will be used for this solicitation. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.fbo.gov Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. To include all required reports and data. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8213-14-R-3026/listing.html)
- Record
- SN03294991-W 20140226/140224234417-7f56f9f1757548ea38b9c8f7827e5dbd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |