SOLICITATION NOTICE
C -- Indefinite Delivery Contract for Surveying & Mapping Services to include Boundary Maintenance to support the Little Rock District and the Southwest Division
- Notice Date
- 3/10/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 541370
— Surveying and Mapping (except Geophysical) Services
- Contracting Office
- USACE District, Little Rock, 700 West Capitol, Little Rock, AR 72201
- ZIP Code
- 72201
- Solicitation Number
- W9127S-14-R-0002
- Response Due
- 4/9/2014
- Archive Date
- 5/9/2014
- Point of Contact
- Vonda S. Reeves Rogers, 501-340-1273
- E-Mail Address
-
USACE District, Little Rock
(vonda.s.rogers@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for Architect & Engineering Services being procured in accordance with PL 92-582 (Brooks A-E Act) as implemented in FAR Part 36.6. A written solicitation will not be posted. CONTRACT INFORMATION: Architect-Engineering (A-E) services are required for an Indefinite Delivery Contract for Surveying & Mapping Services to include Boundary Maintenance to support the Little Rock District and the Southwest Division of the U.S. Army Corps of Engineers. The Little Rock District Corps of Engineers may award multiple contracts for Surveying and Mapping Services for Programs within Southwest Division boundaries or other locations as may be assigned to the Little Rock District and Southwest Division. This announcement will result in one or two contract awards with both being specifically set aside for small business award. Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services. Only firms considered highly qualified will be awarded a contract. Rates will be negotiated for each 12-month period of the contract. The contract term for each award will be for five (5) years. Work under this contract is subject to satisfactory negotiation of individual task orders, with the total IDC value not to exceed $10,000,000 over the five (5) year life of the contract. Work will be issued by negotiated firm-fixed-price task orders. The wages and benefits of service employees (see FAR 22.10) performing under these contracts must be at least equal to those determined by the Department of Labor under the Service Contract Act. The North American Industry Classification System (NAICS) code for this action is 541370 with a small business size standard of $14,000,000.00. Task Order Selection Process: If more than one firm is selected, Task Orders will be allocated based upon the Survey Section Project Manager's and Contracting Officer's determination of the qualifications, previous performance and adherence to project's schedule, the nature of the work involved in the task order, and capacity to accomplish the task order in the required time. PROJECT INFORMATION: The selected firm(s) will be required to perform surveying services to include Boundary Maintenance within the Southwest Division as may be assigned to the Little Rock District and Southwest Division. Some of the services include work of the following types: Topographic, Cadastral, Geodetic Control, Structural Deformation, Terrestrial Scanning, Construction Layout, Single Beam Hydrographic, Multi Beam Hydrographic and Engineering surveys. Final products must be submitted in either hard copy E-size drawings or Bentley Microstation Design Files (DGN), or both, as called for in the orders. SELECTION CRITERIA: The selection criteria are listed below. Criteria A thru D are primary. Criteria E is secondary and will only be used as a tie-breaker among technically equal firms. A. PROFESSIONAL QUALIFICATIONS: The contract will require the following disciplines with registration numbers where applicable: (1) Professional Land surveyors with registration number for the states of Arkansas, Missouri, Oklahoma, Kansas and Texas. The prime must have Land Surveyors Licensed in Arkansas and Missouri on staff as a majority of the work will be in those states. (2) Five Party Chiefs (all capable or using GPS, both RTK and Static) (3) A minimum of 4 CADD Specialist with experience using Microstation and InRoads (4) Survey Technicians with the ability to Blue Book observations for inclusion into the NSRS (National Spatial Reference System), along with the equipment and personnel capable of surveying and Blue Booking 2nd Order Class 1 leveling lines and GPS projects. Resumes contained in Standard Form (SF) 330, Part I, Section E shall be completed for each discipline. No more than three (3) resumes per discipline shall be submitted except where more than three (3) are specifically requested. ROLE IN THIS CONTRACT, Block 13 under Part I, Section E must use the same discipline nomenclature as is listed in this announcement. If an individual will serve in more than one discipline, then those disciplines shall be clearly indicated in Block 13, PART I, Section E. B. SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE in: (1) Boundary surveys in the US Public Land Survey System used in Arkansas, Missouri, Kansas, and Oklahoma, and the metes and bounds system used in Texas. (2) Topographic surveys for small and large construction projects. (3) Geodetic control surveys that involve blue booking leveling projects and GPS projects, for inclusion into the National Spatial Reference System. (4) Hydrographic surveys in shallow water areas that do not allow access by large hydrographic survey boats and other larger areas that can accommodate a larger boat. (4) Surveys for flood studies that include collecting channel and over bank sections, along with bridge and culvert details. (5) Boundary monument replacement and encroachment surveys. (6) High precision structural behavior measurements on both concrete and earthen flood control structures and navigation structures. (7) The collection of data and processing the data into digital terrain models using the Inroads software, and Microstation to produce drawings and data files that comply with the current AEC CADD Standards. (8) GPS surveys, that require 4 3-man field parties equipped with 3 dual frequency GPS receivers each that are capable of collecting static or RTK data. (9) Adequate post processing support for the GPS crews, to post process static data, perform constrained least squares adjustments, and submitting the data to the National Geodetic Survey for inclusion into the National Spatial Reference System, using the process known as quote mark Blue Booking quote mark. SF330, Part I, Section H shall include a matrix for items (1) thru (9) which correlates each item with example projects listed in Section F. Section H shall be limited to no more than 25 pages. C. CAPACITY TO ACCOMPLISH THE WORK: (1) Show capacity of firm to furnish equipment and personnel to maintain five detailed topographic or boundary crews, including the capacity to field 5 3-man survey parties. Each Survey party shall have available the following equipment, as needed. A 4 wheel drive truck, 4 wheeled minimum ATV, 16 foot minimum boat, 10 foot boat for working in small remote water bodies, Total Station, Digital Level, electronic field book, GPS receivers capable of collecting static or RTK data, as necessary for the specific job assignment. Section H shall be limited to no more than 25 pages. D. PAST PERFORMANCE: Past performance on DOD and other contracts with respect to cost control, quality of work and compliance with performance schedules. E. GEOGRAPHIC LOCATION: Geographic location with respect to Little Rock District, and Southwest Division. SUBMISSION REQUIREMENTS: Interested Architect-Engineer firms having the capabilities to perform this work are invited to submit five (5) completed paper copies of their SF 330 (Architect-Engineer Qualifications), to U.S. Army Corps of Engineers, Little Rock District, CESWL-CT, ATTN: Mrs. Vonda S. Rogers (Room 7315), P. O. Box 867, Little Rock, Arkansas 72203-0867. SF 330 6/2004 edition must be used, and may be obtained from the Government Printing Office or from the following web site: http://contacts.gsa.gov/webforms.nsf/22f268ed0a3986298525 69a4006ed7cc?OpenView&Start=30. Include DUNS number in SF330 PART I, Section B, Block 5. A firm located within the United States may obtain a DUNS number by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://www.dnb.com/us/. If the firm is located outside the United States, the local Dun and Bradstreet office should be contacted. All fonts shall be at least 10 or larger. Pages shall be 8-1/2 inches by 11 inches. Part I of the SF 330 form is limited to 75 pages. Blank sheets/Tabs separating the sections within the SF 330 will not count in the aforementioned page-count maximum for Part I. The organization chart required in section D and the matrix required as section G, Part I of the SF330 may be presented on a sheet up to 11 inches by 17 inches. If an 11 inch by 17 inch sheet is used, it shall be neatly folded to 8-1/2 inches by 11 inches, bound into the SF330 at the proper location, and counted as one page. A maximum of ten (10) projects including the prime and consultants will be reviewed in Part I, Section F. Use no more than one page per project. When listing projects in Part I, Section F an Indefinite Delivery Contract (IDC) with multiple Task Orders as examples is not considered a project. It shall be noted that a task order executed under an Indefinite Delivery Contract is considered a Project. In Block G-26, along with the name, include the firm with whom the person is associated. A Part II is required for each branch office of the Prime Firm and any Subcontractors that will have a key role in the proposed contract. Submittals must be received no later than 3:00 P.M. central time on 9 April 2014. Regulation requires that the Selection Board not consider any submittals received after this time and date. Late proposal rules in FAR 15.208 will be followed for submittals received after 3:00 P.M. Central Time on the closing date specified in this announcement. The A-E Evaluation Board (Selection Board) is tentatively scheduled to commence on 21 April 2014. As required by acquisition regulations, interviews for the purpose of discussing prospective contractor qualifications for the contract will be conducted only for those firms considered most highly qualified after submittal review by the selection board. Interviews will be conducted by telephone and will most likely occur the same week that the Selection Board convenes. This is not a request for proposal. Solicitation packages are not provided. Phone calls to discuss the solicitation are discouraged unless absolutely necessary. Personal visits for the purpose of discussing this solicitation are not allowed. To verify your proposal has been delivered, you may e-mail Vonda Rogers at: Vonda.S.Rogers@usace.army.mil. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. For instructions on registering with the SAM, please see the SAM Web site at http://www.sam.gov/. POINT OF CONTACT FOR THIS ANNOUNCEMENT IS MRS. VONDA S. ROGERS. SUBMIT QUESTIONS TO Vonda.S.Rogers@usace.army.mil. Be sure to include solicitation number W9127S-14-R-0002 and project title on the subject line of your email. This notice is posted in its entirety and hereby serves as the official solicitation for this project. Contracting Office Address: USACE Little Rock District, 700 West Capitol, Little Rock, AR 72201, US Place of Performance: USACE Little Rock District, 700 West Capitol, Little Rock, AR 72201, US
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA03/W9127S-14-R-0002/listing.html)
- Place of Performance
- Address: USACE District, Little Rock 700 West Capitol, Little Rock AR
- Zip Code: 72201
- Zip Code: 72201
- Record
- SN03306239-W 20140312/140310234534-f3b42de8b7cc480f4a40af00df71ed6b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |